|
| Name | : | Dr Manoj Kumar |
| Designation | : | Assistant Professor (Grade-I) |
| Department | : | Mechanical Engineering |
| Qualification | : |
Ph.D. Solid Mechanics and Design (I.I.T Kanpur) |
| Address | : |
Department of Mechanical Engineering N.I.T. Jalandhar, Jalandhar (Panjab) - 144011 |
| Phone | : | +91 979 355 7548 |
| Email ID | : | kumarm@nitj.ac.in |
| Fax | : | +91-0181-2690320 |
| Personal Web Link | : |
ResearchGate |
| Google Scholar Link | : |
Manoj Kumar |
| Research Interests | : | Solid Mechanics, Ductile Fracture: Continuum Damage Mechanics Model; Dynamic Fracture Mechanics; High Strain Rate Behavior; Large Deformation Elasto-Plastic Impact/Contact Problems; Finite Element Method; Computer-Aided Design. |
| Brief Research Profile: | : |
My research interests are centered on contact-impact problems, experiment and modeling of ductile fracture. Ductile fracture occurs in contact-impact problems like crashworthiness of vehicles, impact testing etc. Ductile fracture involves three stages, viz., void nucleation, void growth and void coalescence to form a micro crack. The mechanisms of ductile fracture are quite depended on various parameters such as strain rate, temperature, etc. Presently, I am devising solutions for high velocity impact problems. I have been working towards development of non-linear ductile damage law at high strain rate and high temperature and for negative triaxiality for impact problems. Impact problems, which often lead to dynamic ductile fracture, are characterized by large plastic deformation, high strain rates, thermal softening and negative triaxiality. It is well established that ductile fracture occurs due to void nucleation, growth and finally coalescence into a micro-crack. One of the commonly used approaches for the prediction of ductile fracture, based on this micro-structural observation, is the Continuum Damage Mechanics (CDM) model, in which the void density is represented by a continuum variable called damage. In this model, the critical damage value, based on a void coalescence condition or determined experimentally, is used as the fracture initiation criterion. |
| Year | Conference | Publication |
|---|---|---|
| 2022 | IOP Conference Series: Materials Science and Engineering | Performance of Dye-Sensitized Solar Cell using Hamelia Patens leaves as natural dye |
| 2022 | International Conference on Materials Science and Engineering (ICMSE 2022) NIT JALANDHAR 11/06/2022 - 12/06/2022 | Performance of Dye-Sensitized Solar Cell using Hamelia Patens leaves as natural dye |
| 2022 | International Conference on Materials Science and Engineering (ICMSE 2022) NIT JALANDHAR 11/06/2022 - 12/06/2022 | Finite Element Analysis of Impression Creep on P91 |
| 2022 | International Conference on Advances in Mechanical Engineering (ICAME-2020), 10-11 January, 2020, VNIT Nagpur, India | Numerical analysis of origami-ending crash tubes |
| 2022 | International Conference on Materials Science and Engineering (ICMSE 2022) NIT JALANDHAR 11/06/2022 - 12/06/2022 | Performance of Dye-Sensitized Solar Cell using Hamelia Patens leaves as natural dye |
| 2022 | International Conference on Materials Science and Engineering (ICMSE 2022) NIT JALANDHAR 11/06/2022 - 12/06/2022 | Impact of ogival nosed Projectiles on Al 1100 H-12 thin Plates : Numerical Study |
| 2020 | International Conference on Advances in Mechanical Engineering (ICAME-2020), 10-11 January, 2020, VNIT Nagpur, India | Finite Element Analysis of Ballistic Impact on monolithic and multi layered target plate with and without air gap. |
| 2019 | 7th International Congress on Computational Mechanics and Simulation,11-13 December 2019, IIT Mandi, India. | FEM anal- ysis of static and low cycle fatigue of carbon-epoxy laminates double cantilever beam (DCB). |
| 2019 | 7th International Congress on Computational Mechanics and Simulation,11-13 December 2019, IIT Mandi, India. | Finite Element Method Analysis of Ballistic Impact on Aluminium Plate. |
| 2018 | The Second International Conference on Structural Integrity and Exhibition (SICE 2018); HYDERABAD, INDIA JULY 25-27, 2018 | Dipankar Bora, , Sachin S. Gautam and Manoj Kumar ; "Ductile Fracture in Tube Impact Problem Using A Lode Angle Dependent Failure Criterion " |
| 2018 | Second Quadrennial International Conference on Structural Integrity (ICONS 2018), IIT Madras, Chennai, India, December 14th - 17th, 2018 | Kumar M., and Gautam S. S., Parametric study of ballistic impact using continuum damage mechanics (CDM) model, Second Quadrennial International Conference on Structural Integrity |
| 2018 | 8th International Conference on Meterials Processing and Characterization,16th-18th March 2018, Bachupally,Hyderabad,Telangana, India. | Dipankar Bora, Manoj Kumar, Sachin S. Gautam, Ductile fracture at high velocity impact of cylindrical tubes |
| 2018 | Second Quadrennial International Conference on Structural Integrity (ICONS 2018), IIT Madras, Chennai, India, December 14th - 17th, 2018 | Kumar M., and Gautam S. S., Parametric study of ballistic impact using continuum damage mechanics (CDM) model |
| 2018 | 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University, Noida, October 3rd - 5th , 2018, (submitted) . | Bora D., Kumar M., and Gautam S. S., Simulation of ductile fracture at high velocity impact of cylindrical tubes |
| 2018 | 19th ISME conference on advances in mechanical engineering, Dec 20-22, 2018, NIT Jalandhar, Punjab | Manoj Kumar, Janmeet Singh Manku, and Pramod Kumar, Simulation of effect of velocity at the tool interface in Orthogonal Metal Cutting using Continuum Damage Mechanics (CDM) Model |
| 2018 | 19th ISME conference on advances in mechanical engineering, Dec 20-22, 2018, NIT Jalandhar, Punjab | Jitendra basrani, Pramod kumar and Manoj Kumar, Energy recovered from bicycle with the help of flywheel |
| 2017 | 3rd Indian Conference on Applied Mechanics (INCAM 2017), MNNIT Allahabad | Manoj Kumar, Utkarsh Deep and P M Dixit, Effect of Projectile shape of Ballistic Impact using Continuum Damage Mechanics (CDM) Model |
| 2017 | 3rd Indian Conference on Applied Mechanics (INCAM 2017), MNNIT Allahabad | Manoj Kumar, Janmeet Singh Manku and P M Dixit, Simulation of effect of friction at the tool interface in Orthogonal Metal Cutting using Continuum Damage Mechanics (CDM) Model |
| 2016 | 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), Dec. 2016, IIT Delhi | Manoj Kumar and P M Dixit, Simulation of Fracture in The Taylor Test Using Continuum Damage Mechanics Model. |
| 2016 | 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), Dec. 2016, IIT Delhi | Manoj Kumar, Utkarsh Deep and P M Dixit, Simulation and Analysis of Ballistic Impact using Continuum Damage Mechanics (CDM) Model. |
| 2015 | XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), 1-3 Sep. 2015, Barcelona - Spain | Manoj Kumar and P M Dixit, Simulation of Damage Growth in Pre-Notched Cylindrical Test Specimens Using Continuum Damage Mechanics Model |
| 2015 | Second International Conference on Damage Mechanics (ICDM2 2015), July 8-11,2015, Troyes, France. | Manoj Kumar and P M Dixit, Effect of Crack Closure Parameter and Negative Triaxiality on Damage Growth in Upsetting |
| 2014 | 5th International Congress On Computational Mechanics And Simulation (ICCMS), 10th – 13th December 2014, Chennai, India. | Manoj Kumar and P M Dixit, Analysis of Damage in Steel Cylindrical Test Specimen |
| Type | Title | Publisher | Authors | ISBN/ISSN No. | Year |
|---|---|---|---|---|---|
| Lecture Notes in Mechanical Engineering book series (LNME) | " Finite Element Analysis of Ballistic Impact on Monolithic and Multi-layered Target Plate with and Without Air Gap" | Springer Nature, Advances in Mechanical Engineering ( Lecture Notes in Mechanical Engineering book series (LNME)) Series ISSN 2020:591-599 | Rohit Kumar , Manoj Kumar , and Pramod Kumar | ISSN 2020:591-599 | 2020 |
| Mechanical Engineering | Advances in Engineering Design | Springer Nature Singapore Pte Ltd. | Manoj Kumar, Dipankar Bora and Sachin Singh Gautam | 978-981-13-6468-6 | 2019 |
| Role | Project Type | Title | Funding Agency | From | To | Amount | Status | Co-Investigator |
|---|
| Category | Type | Title | Venue | From | To | Designation |
|---|---|---|---|---|---|---|
| Faculty Development Program cum Short Term Course | International | FEM and Modal Analysis in Engineering” (FEMMAE-22) | NIT Jalandhar | 11/03/22 | 15/03/22 | Organiser |
| International Conference | International | International Conference on Materials Science and Engineering” (ICMSE-2022) International Conference | NIT Jalandhar | 11/06/22 | 12/06/22 | Organising Secretary |
| Faculty Development Program cum Short Term Course | International | FEM and Modal Analysis in Engineering” (FEMMAE-19) | NIT Jalandhar | 24/12/19 | 28/12/19 | Organiser |
| Faculty Development Program cum Short Term Course | International | Training and Practice on MATLAB for Engineering Solutions ” (TPMES-20 | Dr. B. R. Ambedkar National Institute of Technology Jalandhar, | 26/11/20 | 30/11/20 | Organiser |
| Conference | National | 19th ISME Conference on Advances in Mechanical Engineering | 20/12/2020 | 22/12/2020 | Organiser | |
| International Conference | International | First International Conference on Materials Science & Engineering | NIT Jalandhar | 11/06/19 | 12/06/19 | Organiser |
| Workshop | National | Introduction to MATLAB for Engineers | NIT Jalandhar | 26/06/2020 | 26/06/2020 | Organiser |
| Conference | National | INDIAN SOCIETY FOR TECHNICAL EDUCATION FACULTY SECTION CONVENTION-2022 | Dr B R Ambedkar National Institute of Technology | 30/09/22 | 30/09/22 | Organising Secretary |
| Workshop | National | CAD CAM Training for NIT Jalandhar student | NIT Jalandhar | 21/02/20 | 08/03/20 | Organiser |
| Designation | Organization |
|---|---|
| Scientist SC | ISRO Satellite Centre ( ISAC ) , Bangalore |
| Associate software developer | Accenture PVT INDIA |
| Physics Faculty | FIITJEE Limited, Delhi |
| Student Tutor-ESO202 (Mechanics of Solids) 2012 | Indian Institute of Technology Kanpur |
| Student Tutor-ESO202 (Mechanics of Solids) 2013 | Indian Institute of Technology Kanpur |
| Project Scientist 2015-2016 | Indian Institute of Technology Kanpur |
| Assistant Professor (Guest) Aug 2016-Dec 2017 | Motilal Nehru National Institute of Technology Allahabad |
| Assistant Professor (Jan-2018 to Till Now) | Dr. B. R. Ambedkar National Institute of Technology Jalandhar, |
| Teaching Assistant, Department of Mechanical Engineering (July 2010- July 2015) | Indian Institute of Technology Kanpur |
| Scholar Name | Research Topic | Status | Year | Co-Supervisor |
|---|---|---|---|---|
| Kotteda Tarun Kumar | Fabrication and Characterization of Metal Matrix Nano Composites | Going On | July 2021 | Dr. Pramod Kumar |
| SHIV NARAYAN PRAJAPATI | Finite Element Analysis of Biodegradable component machined by 3D Photochemical Machining (PCM) Technology | Going On | July 2021 | Dr. Pramod Kumar |
| Mr. Pradeep Kumar Singh | Investigation of Hypervelocity Impact Behavior of Projectile on Metal Plates | Going On | July 2019 | |
| Sumit Chopra | Engineering failure analysis | Going On | Jan 2022 | Dr. Pramod Kumar |
| Mr. Jitendra Basrani | Fatigue and High Strain Characterization of Hybrid Composite materials | Going On | Dec. 2018 | Dr. Pramod Kumar |
| Mr. Sanjay Kumar | Experimental, Modelling & Simulation of Friction Stir Additive Manufacturing (FSAM) | Going On | Dec 2020 | Dr. Pramod Kumar |
| Student Name | Dissertation Title | Status | Year | Co-Supervisor |
|---|---|---|---|---|
| Aastik Bhatnagar | Finite Element Analysis of Ballistic Performance of Kevlar/Epoxy and Cfrp For Various Fiber Orientations | Completed | 2022 | Dr. Nitin Sharma |
| VARDAN | Performance of Dye-Sensitized Solar Cells Using Tradescantia Pallida And Hamelia Patens As Natural Dyes | Completed | 2022 | Dr Sangeeta Garg, Chemical Engineering |
| Raghvendra Singh | Assessment of A Predictive Model For Indentation In Cylinder-Flat Contact Using Finite Element Analysis | Completed | 2022 | Dr. Pramod Kumar |
| Sunny Sihag | Aeroelastic Simulation of NREL Phase VI Wind Turbine By Using Fluid-Structure Interaction | Completed | 2022 | Dr. Anurag Tiwari, Chemical Engineering |
| Suman Kumar | Investigation of Effect of Strain Rate On Hybrid Glass Fibre Composite Reinforced With Natural Fiber | Completed | 2022 | Dr. Pramod Kumar |
| Nidhi Kumari | Finite Element Simulations of Ballistic Impact On Metallic Targets Subjected To Oblique Projectiles. | Completed | 2022 | |
| Haris Farooq | Simulation of Origami-engineering. | Completed | 2022 | |
| GAJULA PAVAN THIRUMALA GOPI | Numerical Simulation of Dynamic Behaviour of GFRP Under Strain Rate by Using ABAQUS/Explicit | Completed | 2021 | Dr Anand Vaz |
| MUDDU RAHUL BHARADWAJ | Numerical Simulation of Ballistic Impact Response On Composite Materials For Different Shapes of Projectiles. | Completed | 2021 | |
| PUNEET KUNDAN | Mechanical Behavior of Rubberized Concrete Composites: An Experimental Study (Co-Supervisor: Dr. Sumit Sharma) | Completed | 2021 | Dr. Sumit Sharma |
| RAJNISH KUMAR | Finite Element Analysis of Impression Creep Behavior of Boron Modified P91 Steel (Co-Supervisor: Dr.Raman Bedi ) | Completed | 2021 | Dr Raman Bedi |
| SAMIKSHA GUNWANTRAO GUDADHE | Simulation Of Crack Propagation Using XFEM. (FEA Analyst CAE Durability at CNH | Completed | 2021 | |
| SAUMYA SUYAL | Design And Development of A Three-Link Serial Manipulator In Its Trajectory and Force Control Mode (With Dr Joseph Anand Vaz). | Completed | 2021 | Dr Anand Vaz |
| PALAK BHAGORIA | Finite Element Analysis of Ballistic Impact On Multi-Layered Dissimilar Metal Targets. | Completed | 2021 | |
| RAJNISH KUMAR | Finite Element Analysis of Impression Creep Behavior of Boron Modified P91 Steel (Co-Supervisor: Dr.Raman Bedi ) | Completed | 2021 | Dr Raman Bedi |
| PAVAN KUMAR MEENA | Finite Element Analysis of Sus304 Steel Weld Joints Using Prescribed Temperature Approach. | Completed | 2020 | Dr Dinesh K Shukla |
| ROHIT KUMAR | Finite Element Analysis of High Velocity Impact On Multi-Layered Metal Targets Using Various Projectile Shapes. | Completed | 2020 | |
| AJAY KUMAR DIWAKAR | Modelling And Analysis Of Composite Material Using Material Studio And ABAQUS. | Completed | 2019 | Dr. Sumit Sharma |
| ARVIND | Finite Element Analysis Of Carbon-Epoxy Composite Under Static And Fatigue Loading. | Completed | 2019 | Dr Raman Bedi |
| SOHEL ANSARI | Finite Element Analysis of Ballistic Impact On Metal. | Completed | 2019 | Dr. Pramod Kumar |
| Name | Reg./Ref. No. | Date of Award/Filling | Organization | Status |
|---|
| Position Held | Organization | From | To |
|---|---|---|---|
| Member, Institute library committee | NIT Jalandhar | 13-02-18 | 20-02-20 |
| Institute Coordinator, Alumni Association | NIT Jalandhar | 13-02-19 | Present |
| Faculty Advisor of Team Daksh | NIT Jalandhar | 01-05-18 | Present |
| Member of TENKERING LAB | NIT Jalandhar | 01-05-19 | Present |
| Team Member of NIRF | NIT Jalandhar | 01-03-18 | Present |
| B.TECH Batch Coordinator of 2015-2019; 2019-2023 | NIT Jalandhar | 01-02-18 | Present |
| Associate Lab In-charge, CAD/CAM Lab, Dept of Mechanical Engineering | NIT Jalandhar | 01-02-18 | Present |
| Warden, Hostel-7 and &E | NIT Jalandhar | 13-02-2018 | 17-10-2018 |
| Member, Academic Committee | NIT Jalandhar | 30-06-2020 | Present |
| Title | Activity | Given by | Year |
|---|---|---|---|
| BEST PAPER AWARD | For presenting a Research Paper on “Numerical investigation on ballistic resistance of aluminium plate by different shaped steel projectiles" at Maulana Azad National Institute of Technology, Bhopal in the International Conference | Maulana Azad National Institute of Technology, Bhopal in the International Conference on “Latest Trends in Civil, Mechanical and Electrical Engineering” (LTCMEE- 2021), April 12-13, 2021. | 2021 |
| Institute Fellowship | For Phd Programme | Department of Mechanical Engineering of IIT Kanpur. | 2010-2016 |
| Gold Medal | Academic excellence in M. Tech. | MNNIT, Allahabad. | 2010 |
| Ratan Prakash Memorial Gold Medal | Academic excellence in M. Tech. | MNNIT, Allahabad. | 2010 |
| Institute Fellowship | For M.Tech Programme | Department of Mechanical Engineering, MNNIT, Allahabad. | 2008-2010 |
| Best Student | B. Tech. | RVCE, Bangalore | 2007 |
