2022 |
Polymer composites |
Singh, J., Goyal, K. K., Kumar, R., & Gupta, V. (2022). Influence of process parameters on mechanical strength, build time, and material consumption of 3D printed polylactic acid parts. Polymer Composites, 43(9), 5908-5928. |
2022 |
Polymer composites |
Singh, J., Goyal, K. K., Kumar, R., & Gupta, V. (2022). Development of artificial intelligence‐based neural network prediction model for responses of additive manufactured polylactic acid parts. Polymer Composites, 43(8), 5623-5639. |
2022 |
Materials Today: Proceedings |
Akula, V.S.R.P., Goyal, K.K., Verma, O.P. and Sharma, N., 2022. Low-cost azimuth and elevation antenna rotator for LEO satellite tracking. Materials Today: Proceedings. (https://doi.org/10.1016/j.matpr.2022.02.292) |
2022 |
Materials Today: Proceedings |
Sharma, N., Sharma, A., Goyal, K.K., Gupta, S., Bahl, S. and Sharma, G.K., 2022. Transformation temperature and corrosion behavior of porous NiTi and NiTiCu shape memory alloy. Materials Today: Proceedings. (https://doi.org/10.1016/j.matpr.2022.02.519) |
2022 |
International Journal of Advanced Manufacturing Technology |
Goyal, K.K., Sharma, N., Gupta, R.D., Gupta, S., Rani, D., Kumar, D. and Sharma, V.S., 2022. Measurement of performance characteristics of WEDM while processing AZ31 Mg-alloy using Levy flight MOGWO for orthopedic application. The International Journal of Advanced Manufacturing Technology, pp.1-23. (https://doi.org/10.1007/s00170-021-08358-8) |
2022 |
Materials |
Goyal, K.K., Sharma, N., Dev Gupta, R., Singh, G., Rani, D., Banga, H.K., Kumar, R., Pimenov, D.Y. and Giasin, K., 2022. A Soft Computing-Based Analysis of Cutting Rate and Recast Layer Thickness for AZ31 Alloy on WEDM Using RSM-MOPSO. Materials, 15(2), p.635. (https://doi.org/10.3390/ma15020635) |
2022 |
Journal of Electronic Materials |
Kumar, S., Seth, R., Panwar, S., Goyal, K.K., Kumar, V. and Choubey, R.K., 2021. Morphological and Optical Studies of ZnO-Silica Nanocomposite Thin Films Synthesized by Time Dependent CBD. Journal of Electronic Materials, 50(6), pp.3462-3470. (https://doi.org/10.1007/s11664-021-08863-2) |
2022 |
Materials Today: Proceedings |
Singh, J., Goyal, K.K., Kumar, R., 2022. Effect of filling percentage and raster style on tensile behaviour of FDM produced PLA parts at different build orientation. Materials Today: Proceedings, 63, 433-439. (https://doi.org/10.1016/j.matpr.2022.03.444) |
2022 |
Materials Today: Proceedings |
Phanden, R. K., Sheokand, A., Goyal, K. K., Gahlot, P., & Demir, H. I. (2022). 8Ds method of problem solving within automotive industry: Tools used and comparison with DMAIC. Materials Today: Proceedings. (https://doi.org/10.1016/j.matpr.2022.05.383) |
2022 |
Materials Today: Proceedings |
Kumar, S., Kumar, R., Goyal, K. K., Sharma, N.,Development of aluminium based hybrid MMC and investigation of tribological properties. Materials Today: Proceedings. 63, 400-405. |
2022 |
Materials Today: Proceedings |
Kumar, S., Kumar, R., Goyal, K. K., Sharma, N.,Experimental study on tensile strength of Al2024/SiC/FA/Graphite hybrid MMC prepared by stir casting. Materials Today: Proceedings. 63, 395-399. |
2021 |
Journal of Physics: Conference Series, 1854(1) |
Kumar, A., Goyal, K. K., Bhardwaj, A., & Sharma, N., “Development and Characterization of AA2024/SiC/Gr/Fly ash Hybrid Composite” |
2021 |
Lecture Notes on Multidisciplinary Industrial Engineering - Recent Advances in Operations Management Applications (Springer) |
Yadav M., Bhardwaj A., & Goyal K. K., (2021) “Data analytics for NIRF in case of Indian institutions to check the consistency and validity of ranking results” |
2021 |
Advancements in Manufacturing Systems and its Optimization (CRC Press, Taylor & Francis) |
Mandal A. K., Kumar R., Goyal K. K., & Jadoun R. S., “Effect of Electrode Geometry On Resistance Spot Welding Of Steel Sheets” |
2021 |
Lecture Notes in Mechanical Engineering (Springer) |
Gupta K., Goyal K. K., Kumar R., & Singh J., (2021, 1 June) “Artificial Intelligence based Neural Network prediction model for predicting multi-responses of Finishing Honing Process” |
2021 |
Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, pp. 621-627 (Springer |
Kumar, G., Goyal, K. K., & Batra, N. K., “Role of performance measures in the configuration selection of reconfigurable manufacturing system” |
2021 |
OPSEARCH, (Springer) |
Kumar, G., Goyal, K.K., Batra, N.K. and Rani, D., 2021. Single part reconfigurable flow line design using fuzzy best worst method. OPSEARCH, pp.1-29. (https://doi.org/10.1007/s12597-021-00550-4) |
2021 |
Journal of Electronic Materials, 50(6), 3462-3470. Springer (IF-1.93) |
Kumar, S., Seth, R., Panwar, S., Goyal, K. K., Kumar, V., & Choubey, R. K. (2021) “Morphological and Optical Studies of ZnO-Silica Nanocomposite Thin Films Synthesized by Time Dependent CBD” |
2019 |
Journal of Physics: Conference Series 1240(1) |
Kumar, G., Goyal, K. K., & Batra, N. K., “Evolution, principles and recent trends in reconfigurable manufacturing system” |
2017 |
Journal of Vibration Engineering & Technologies, 5(6), 547-556 (SCI, Springer, IF-0.615) |
Improved Suspension Design of Indian Railway General Sleeper ICF Coach for Optimum Ride Comfort |
2016 |
International Journal of Advanced Manufacturing Technology, 84(5), 1587-1600 (SCI, Springer, IF-2.6) |
Design of reconfigurable flow lines using MOPSO and maximum deviation theory |
2016 |
International Journal of Machining and Machinability of Materials, 18(4), 392-411 (Scopus, Inderscience) |
Investigation of wire electrical discharge machining of ZrSiO4P/Al 6063 MMC |
2013 |
Journal of Manufacturing Systems, 32(4), 724-730 (SCI, Elsevier, IF-3.69) |
A Novel Methodology to Measure the Responsiveness of RMTs in Reconfigurable Manufacturing System |
2013 |
International Journal of Production Research, 51(6), 1762-1776, (SCI, Taylor & Francis, IF-2.62) |
A Comprehensive Approach to Operation Sequence Similarity Based Part Family Formation in the Reconfigurable Manufacturing System |
2013 |
International Journal of Simulation Modelling, 12(1), 17-26 (SCI, IF-1.94) |
Applying swarm intelligence to design the reconfigurable flow lines |
2012 |
International Journal of Production Research, 50(15), 4175-4191 (SCI, Taylor & Francis, IF-2.62) |
Optimal configuration selection for reconfigurable manufacturing system using NSGA II and TOPSIS |
|
|
|