| 2022 |
Journal of Materials Engineering and Performance (2022): 1-15. |
Sharma, Vishal, Jaiinderpreet Singh, Vishal S. Sharma, Anish Sachdeva, Munish Kumar Gupta, and Sharanjit Singh. "Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process." |
| 2021 |
International Journal of Sustainable Energy, 2021, 40(5), pp. 460–476 |
Choudhary, S., Sachdeva, A., Kumar, P “Time-based assessment of thermal performance of flat plate solar collector using magnesium oxide nanofluid” |
| 2021 |
International Journal of Quality and Reliability Management, 2021 |
Chopra, A., Sachdeva, A., Bhardwaj, A “Selection of appropriate maintenance strategy using fuzzy VIKOR technique: application in paper industry” |
| 2021 |
International Journal of Simulation and Process Modelling, 2021, 16(4), pp. 323–332 |
Kumar, N., Tewari, P.C., Sachdeva, A. “Stochastic modelling and availability analysis of repairable system of a milk processing plant” |
| 2021 |
Applied Thermal Engineering, 2021, 183, 115931 |
Choudhary, S., Sachdeva, A., Kumar, P “Time-based analysis of stability and thermal efficiency of flat plate solar collector using iron oxide nanofluid” |
| 2021 |
Lasers in Manufacturing and Materials Processing, 2021, 8(1), pp. 73–96 |
Sharma, V., Chand, R., Sharma, V.S., Sachdeva, A., Singh, S “Investigating Shrinkage: CAD, Thermal and Volumetric for Selective Laser Sintering of Polyamide Parts” |
| 2021 |
Archives of Computational Methods in Engineering, 2021, 28(5), pp. 3491–3515 |
Srivastava, S., Garg, R.K., Sharma, V.S., Sachdeva, A “Measurement and Mitigation of Residual Stress in Wire-Arc Additive Manufacturing: A Review of Macro-Scale Continuum Modelling Approach” |
| 2021 |
International Journal of Supply and Operations Management, 2021, 8(3), pp. 289–313 |
Sharma, V.K., Sachdeva, A., Singh, L.P. “A meta analysis of sustainable supply chain management from different aspects” |
| 2021 |
International Journal of Operational Research, 2021,42(4), pp.423-442. |
Bahl, Ankur, Anish Sachdeva, and Rajiv Kumar Garg. "Optimising preventive maintenance schedule for a distillery plant." |
| 2020 |
International Journal of Productivity and Quality Management, 2020, 29(4), pp. 542-557 |
Chopra, A., Sachdeva, A., Bhardwaj, A “Prevalent general and preventive maintenance practices in Indian process industry” |
| 2020 |
International Journal for Engineering Modelling, 2020, 33(1-2), pp. 95–107 |
Kumar, N., Tewari, P.C., Sachdeva, A “Petri Nets Modelling and Analysis of the Veneer Layup System of Plywood Manufacturing Plant” |
| 2020 |
International Journal of Simulation and Process Modelling, 2020, 15(5), pp. 401–409 |
Kumar, N., Tewari, P.C., Sachdeva, A “Performance modelling and availability analysis of a milk pasteurising system using Petri nets formalism” |
| 2020 |
Renewable Energy, 2020, 147, pp. 1801–1814 |
Choudhary, S., Sachdeva, A., Kumar, P “Investigation of the stability of MgO nanofluid and its effect on the thermal performance of flat plate solar collector” |
| 2020 |
Rapid Prototyping Journal, 2020, 26(4), pp. 737–764 |
Srivastava, S., Garg, R.K., Sharma, V.S., Alba-Baena, N.G., Sachdeva, A., Chand, R. and Singh, S. “Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review” |
| 2020 |
Renewable Energy, 2020, 152, pp. 1160–1170 |
Choudhary, S., Sachdeva, A., Kumar, P “Influence of stable zinc oxide nanofluid on thermal characteristics of flat plate solar collector” |
| 2020 |
SN Applied Sciences, 2020, 2(9), 1488 |
Kumar, N., Tewari, P.C., Sachdeva, A “Performance assessment of milk processing system using Petri nets” |
| 2019 |
Progress in Additive Manufacturing Vol 4 (1), pp 3-12 |
S Singh, VS Sharma, A Sachdeva "Application of response surface methodology to analyze the effect of selective laser sintering parameters on dimensional accuracy" |
| 2019 |
i-Manager's Journal on Management 13 (4), 26 |
SK Gandhi, A Sachdeva, A Gupta "Managing Service Quality in Technical Education: A Case Study Using Sap-Lap Methodology" |
| 2019 |
Advances in Industrial and Production Engineering, 161-174 |
SK Gandhi, A Sachdeva, A Gupta "Service Quality in Indian SMEs: Developing a Dual Directional Scale at Supplier–Manufacturer Dyad" |
| 2019 |
Journal of Project Management 4 (2), 81-96 |
S Gandhi, A Sachdeva, A Gupta "Reduction of rejection of cylinder blocks in a casting unit: A six sigma DMAIC perspective" |
| 2019 |
Uncertain Supply Chain Management 7 (2), 289-310 |
S Gandhi, A Sachdeva, A Gupta "Supplier service quality in supply chains of Indian SMEs: A dual direction dyadic perspective" |
| 2019 |
Journal of Advances in Management Research 16 (1), 91-122 |
SK Gandhi, A Sachdeva, A Gupta "Impact of service quality on satisfaction and loyalty at manufacturer-distributor dyad: Insights from Indian SMEs" |
| 2018 |
Uncertain Supply Chain Management 6 (3), 255-270 |
H Singh, R Garg, A Sachdeva "Investigating the interactions among benefits of information sharing in manufacturing supply chain" |
| 2018 |
Progress in Additive Manufacturing, 1-10 |
S Singh, VS Sharma, A Sachdeva "Application of response surface methodology to analyze the effect of selective laser sintering parameters on dimensional accuracy" |
| 2018 |
Management Science Letters 8 (10), 991-1014 |
S Gandhi, A Sachdeva, A Gupta "Impact of service quality and satisfaction on employee loyalty: An empirical investigation in Indian SMEs" |
| 2018 |
IUP Journal of Supply Chain Management 15 (1), 7-39 |
SK Gandhi, A Sachdeva, A Gupta "Service Quality Models: A Critical Analysis About Their Relevance to Supply Chains of Small-Medium Manufacturing Units" |
| 2018 |
BVIMSR’s Journal of Management Research 10 (1), 85-102 |
SK Gandhi, A Sachdeva, A Gupta "DEVELOPING A SERVICE QUALITY SCALE FROM EMPLOYEES PERSPECTIVE IN SMALL & MEDIUM MANUFACTURING ENTERPRISES" |
| 2018 |
PACIFIC BUSINESS REVIEW INTERNATIONAL 10 (11), 66-76 |
SK Gandhi, A Sachdeva, A Gupta "Operationalization & Measurement of Service Quality in Manufacturing Supply Chains: A Conceptual Framework" |
| 2018 |
IUP Journal of Organizational Behavior 17 (3), 45-73 |
SK Gandhi, A Sachdeva, A Gupta "Developing a Scale to Measure Employee Service Quality in Indian Small and Medium Manufacturing Enterprises" |
| 2018 |
Journal of Manufacturing Technology Management |
RS Mor, A Bhardwaj, S Singh, A Sachdeva "Productivity gains through standardization-of-work in a manufacturing company" |
| 2018 |
International Journal of Quality & Reliability Management 35 (10), 2373-2387 |
A Bahl, A Sachdeva, RK Garg "Availability analysis of distillery plant using Petri nets" |
| 2018 |
Benchmarking: An International Journal 25 (8), 2635-2659 |
H Singh, RK Garg, A Sachdeva "Framework to precede collaboration in supply chain" |
| 2018 |
Uncertain Supply Chain Management 7 (2), 289-310 |
S Gandhi, A Sachdeva, A Gupta "Supplier service quality in supply chains of Indian SMEs: A dual direction dyadic perspective" |
| 2018 |
Journal of Project Management 4 (2), 81-96 |
S Gandhi, A Sachdeva, A Gupta "Reduction of rejection of cylinder blocks in a casting unit: A six sigma DMAIC perspective" |
| 2018 |
Uncertain Supply Chain Management, Vol 6, pp 149–180 |
Harjit Singh, Dr R K Garg, Dr Anish Sachdeva. “Supply chain collaboration: A state-of-the-art literature review” |
| 2018 |
Uncertain Supply Chain Management, Vol. 6, pp 335–356 |
S. K. Gandhi, Dr Anish Sachdeva, Dr Ajay Gupta. “Distributor service quality in Indian SMEs: A bi-directional customer perspective” |
| 2018 |
Management Science Letters, Vol. 8, pp 455–474 |
S. K. Gandhi, Dr Anish Sachdeva, Dr Ajay Gupta “Developing a scale to measure employee service quality in Indian SMEs” |
| 2018 |
Int. J. of Logistics Systems and Management- (Inderscience), Accepted |
S. K. Gandhi, Dr Anish Sachdeva, Dr Ajay Gupta. “Service Quality in Manufacturing Supply Chains: A Bi-directional perspective from Indian SMEs” |
| 2018 |
International Journal of Quality and Reliability Management-(Emerald) Accepted |
Ankur Bahl, Dr Anish Sachdeva, Prof R K Garg. “Availability Analysis of distillery plant using Petri Nets” |
| 2018 |
Benchmarking-an International Journal (Emerald) |
Harjit Singh, Dr R K Garg, Dr Anish Sachdeva. “Framework to precede collaboration in supply chain” |
| 2018 |
Proceedings of 1st International Conference on Future Learning Aspects of Mechanical Engineering (Springer), Accepted |
S K Gandhi, Dr Anish Sachdeva, Dr Ajay Gupta. “Supplier Service Quality in Indian SMEs: A Dual Directional Customer Perspective” |
| 2017 |
International Journal of Logistics Systems and Management,27 (2),225-259 |
Sheetal Soda, Anish Sachdeva, Rajiv Kumar Garg, "Barriers analysis for green supply chain management implementation in power industry using ISM" |
| 2016 |
Materials Science and Technology, 32(8), 760-772 |
S Singh, Vishal S Sharma, Anish Sachdeva, "Progress in selective laser sintering using metallic powders: A review" |
| 2016 |
The Electricity Journal ,29 (4),43-50 |
Bottlenecks and remedies Sheetal Soda, Anish Sachdeva, Rajiv Kumar Garg, "Implementation of green supply chain management in India" |
| 2016 |
International Journal of Industrial and Systems Engineering,23 (2),155-165 |
Amit Chopra, Anish Sachdeva, Arvind Bhardwaj, "Productivity enhancement using reliability centred maintenance in process industry" |
| 2016 |
International Journal of Machining and Machinability of Materials,18,185-199 |
Naresh Kumar, Anish Sachdeva, Lakhwinder Pal Singh, Himanshu Tripathi, "Experimental investigation of effect of roller burnishing process parameters on surface roughness and surface hardness of C40E steel" |
| 2016 |
International Journal of Industrial and Systems Engineering,23 (2),223-253 |
Sheetal Soda, Anish Sachdeva, Rajiv Kumar Garg, "Literature review of multi-aspect research works carried out on the concept and implementation of GSCM" |
| 2016 |
International Journal of Industrial and Systems Engineering,23 (2),223-253 |
Sheetal Soda, Anish Sachdeva, Rajiv Kumar Garg, "Literature review of multi-aspect research works carried out on the concept and implementation of GSCM" |
| 2016 |
International conference on latest development in MMQC, GZSCET Bathinda,1,447 |
Sheetal Soda, Anish Sachdeva, R K Garg, "Employee's Perception of GSCM status in Power Companies of Punjab" |
| 2015 |
International Journal of Material Forming, 8(1), 157-166 |
Vishal S Sharma, Sharanjit Singh, Anish Sachdeva, Pramod Kumar, "Influence of sintering parameters on dynamic mechanical properties of selective laser sintered parts" |
| 2015 |
Journal of Manufacturing Technology Management,26(6),889-910 |
Sheetal Soda, Anish Sachdeva, Rajiv Kumar Garg, "GSCM: practices, trends and prospects in Indian context" |
| 2014 |
International Journal of Industrial and Systems Engineering,16(4),433-450 |
Manjinder Singh, Anish Sachdeva, Arvind Bhardwaj, "An interpretive structural modelling approach for analysing barriers in total productive maintenance" |
| 2013 |
The International Journal of Advanced Manufacturing Technology,64 (9),1505–1516 |
Anish Sachdeva, Sharanjit Singh, Vishal S Sharma, "Investigating surface roughness of parts produced by SLS process" |
| 2013 |
Materials and Manufacturing Processes,28(2),163-172 |
Sharanjit Singh, Vishal S Sharma, Anish Sachdeva, S K Sinha, "Optimization and analysis of mechanical properties for selective laser sintered polyamide parts" |
| 2013 |
Measuring Business Excellence,17(1),51-71 |
Gaurav Tejpal, RK Garg, Anish Sachdeva, "Trust among supply chain partners: A review" |
| 2012 |
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,226(3),431-444 |
Manu Dogra, Vishal S. Sharma, Anish sachdeva, Narinder Mohan Suri, "Tool life and surface integrity issues in continuous and interrupted finish hard turning with coated carbide and CBN tools" |
| 2012 |
Materials and Manufacturing Processes,27(5),523-530 |
Manu Dogra, Vishal S. Sharma, Anish sachdeva, Narinder Mohan Suri, "Finish hard turning of continuous and interrupted surfaces with cubic boron nitride (CBN) and coated carbide" |
| 2012 |
Materials and Manufacturing Processes,27(6),707-714 |
Sharanjit Singh, Vishal S Sharma, Anish Sachdeva, "Optimization and analysis of shrinkage in selective laser sintered polyamide parts" |
| 2012 |
International Journal of Productivity and Quality Management,9(4) ,456-471 |
Manjinder Singh, Anish Sachdeva, Arvind Bhardwaj, "Measuring manufacturing performance with the implementation of TPM: an exploratory study" |
| 2012 |
International Journal of Machining and Machinability of Materials,1,88-116 |
Manu Dogra, Vishal S. Sharma, Anish sachdeva, Narinder Mohan Suri, Suresh Dhiman, "Surface integrity a key issue in hard turning–a review" |
| 2012 |
Journal of Manufacturing Technology Management,23(7),899-921 |
Rajesh Gupta, Anish Sachdeva, Arvind Bhardwaj, "Selection of logistic service provider using fuzzy PROMETHEE for a cement industry" |
| 2012 |
International Journal of Industrial and Systems Engineering,12(2),223-242 |
Rajesh Gupta, Anish Sachdeva, Arvind Bhardwaj, "A framework for selection of logistics outsourcing partner in uncertain environment using TOPSIS" |
| 2012 |
Journal of Manufacturing Technology Research,4,145 |
Sharanjit Singh, Anish Sachdeva, Vishal S Sharma, "A study on selective laser sintered parts for dimensional and surface characteristics" |
| 2011 |
Journal of Engineering Science and Technology,6(1),11-16 |
Manu Dogra, Vishal S. Sharma, Anish sachdeva, J. S. Dureja, "TPM- A Key Strategy For Productivity Improvement In Process Industry" |
| 2010 |
Journal of Hazardous Materials,173(1),258-264 |
Shailendra Bajpai, Anish Sachdeva, JP Gupta, "Security risk assessment: Applying the concepts of fuzzy logic" |
| 2010 |
International Journal of Precision Engineering and Manufacturing,11(2),341-358 |
Manu Dogra, Vishal S Sharma, Anish Sachdeva, Narinder Mohan Suri, Jasminder Singh Dureja, "Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review" |
| 2010 |
The International Journal of Advanced Manufacturing Technology,50(5),611-624 |
RK Garg, KK Singh, Anish Sachdeva, Vishal S Sharma, Kuldeep Ojha, Sharanjit Singh, "Review of research work in sinking EDM and WEDM on metal matrix composite materials" |
| 2009 |
The International Journal of Advanced Manufacturing Technology,45,156-169 |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "Behavioral and performance analysis of feeding system using stochastic reward nets " |
| 2009 |
Journal of Industrial Engineering International,5(8),5(3) |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "Multi-factor failure mode critically analysis using TOPSIS" |
| 2008 |
Computers & Industrial Engineering,55(4),817-829 |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "Planning and optimizing the maintenance of paper production systems in a paper plant" |
| 2008 |
International Journal of Quality & Reliability Management,25(8),860-877 |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "Reliability analysis of pulping system using Petri nets" |
| 2008 |
Journal of Modelling in Management,3(1),26-39 |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "Availability modeling of screening system of a paper plant using GSPN" |
| 2008 |
International Journal of Productivity and Quality Management,3(4),396-412 |
Anish Sachdeva, Dinesh Kumar, Pradeep Kumar, "A methodology to determine maintenance criticality using AHP" |
