Top 10 highly cited researchers of NITJ till 30.07.2022

List of refereed publications (2022) of NITJ till 01.01.2023

1. Maity, S., & Veer, K. (2023). A Generalized Review Of Human-Computer Interaction Using Electromyogram Signals. In Recent Patents on Engineering (Vol. 17, Issue 4). 
   URL: https://doi.org/10.2174/1872212116666220518122621
    
2. Kannur, B., & Chore, H. S. (2023). Low-fines self-consolidating concrete using rice husk ash for road pavement: An environment-friendly and sustainable approach. In Construction and Building Materials (Vol. 365). 
   URL: https://doi.org/10.1016/j.conbuildmat.2022.130036


3. Srivastava, S., Garg, R. K., Sachdeva, A., & Sharma, V. S. (2023). Distribution of Residual Stress in Wire-Arc Additively Manufactured Small-Scale Component: Single-Versus Multi-Level Heat Input. In Journal of Manufacturing Science and Engineering (Vol. 145, Issue 2). 
   URL:  https://doi.org/10.1115/1.4055569


4. Mathur, P., Sharma, P., & Veer, K. (2023). Comparison of Soft Computing and Optimization Techniques in Classification of ECG Signal. In Recent Advances in Computer Science and Communications (Vol. 16, Issue 2). 
   URL: https://doi.org/10.2174/2666255816666220804161549


5. Kaur, M., & Bharj, J. (2023). Structural, electrical and optical properties of carbon nanoparticle-lithium borate glass composites. In Optik (Vol. 272). 
   URL: https://doi.org/10.1016/j.ijleo.2022.170249


6. Kumar, S., Prakash, G., Gupta, B., & Cappiello, G. (2023). How e-WOM influences consumers’ purchase intention towards private label brands on e-commerce platforms: Investigation through IAM (Information Adoption Model) and ELM (Elaboration Likelihood Model) Models. In Technological Forecasting and Social Change (Vol. 187). 
   URL: https://doi.org/10.1016/j.techfore.2022.122199


7. Kumar, V., & Verma, R. (2023). Effect of GNP and laser-surface texturing on HVOF sprayed WC10Co4Cr coatings for high-wear resistance. In Tribology International (Vol. 178). 
   URL: https://doi.org/10.1016/j.triboint.2022.108057


8. Kumar, M., Dubey, K., Singh, S., Kumar Samriya, J., & Gill, S. S. (2023). Experimental performance analysis of cloud resource allocation framework using spider monkey optimization algorithm. In Concurrency and Computation: Practice and Experience (Vol. 35, Issue 2). 
   URL: https://doi.org/10.1002/cpe.7469


9. Deepika Amirchand, K., Banipal, T. S., Yang, Y.-L., & Singh, V. (2023). Volumetric, UV–Visible, and computational analysis of molecular interactions between L-ascorbic acid and L-histidine in aqueous solutions. In Journal of Molecular Liquids (Vol. 370). 
   URL: https://doi.org/10.1016/j.molliq.2022.120839


10. Giribabu, D., & Mukherjee, S. (2023). Stability of a plane Couette flow over inhomogeneously stressed solids. In International Journal of Mechanical Sciences (Vol. 238). 
    URL: https://doi.org/10.1016/j.ijmecsci.2022.107832


11. Singh, A. K., Rathore, P. K. S., Sharma, R. K., Gupta, N. K., & Kumar, R. (2023). Experimental evaluation of composite concrete incorporated with thermal energy storage material for improved thermal behavior of buildings. In Energy (Vol. 263). 
    URL: https://doi.org/10.1016/j.energy.2022.125701


12. Rajput, P. K., & Sikka, G. (2023). Multi-agent architecture approach for self-healing systems: Run-time recovery with case-based reasoning. In Concurrency and Computation: Practice and Experience (Vol. 35, Issue 1). 
    URL: https://doi.org/10.1002/cpe.7442


13. Tonk, H., Pratap, A., Rani, N., & Gautam, V. (2023). Wind Load Effect on Square and Helical Buildings (Vol. 284, pp. 365–373). 
    URL: https://doi.org/10.1007/978-3-031-12011-4_28


14. Sarkar, S., & Pahuja, S. K. (2023). Effects of Measurement Site on Heart Rate Variability Derived from Photoplethysmography (Vol. 516, pp. 487–492). 
    URL: https://doi.org/10.1007/978-981-19-5221-0_48


15. Patnaik, P., Chakraborty, N., Kaur, P., Juglan, K. C., & Kumar, H. (2023). Thermodynamic and Acoustic Investigation of D-Panthenol in Homologous Series of Polyethylene Glycol at Different Temperatures (pp. 403–424). 
    URL: https://doi.org/10.1007/978-981-19-4147-4_41


16. Hassan, K., Kang, A. S., Singh, G., & Prakash, C. (2023). Application of Life Cycle Analysis in Sustainable Machining of Aluminium 6061 Alloy Under Different Lubricating Conditions (pp. 103–110). 
    URL: https://doi.org/10.1007/978-981-19-4147-4_10


17. Yadav, N. K., Senthil, K., Bawa, S., & Thakur, A. (2023). Evaluation of Sensitive Parameters in the Design of Deeper Manhole (Vol. 284, pp. 1053–1063). 
    URL: https://doi.org/10.1007/978-3-031-12011-4_89


18. Singh, M., Senthil, K., & Bawa, S. (2023). Response of Underground Tunnel Against Seismic Loading (Vol. 284, pp. 1027–1039). 
    URL: https://doi.org/10.1007/978-3-031-12011-4_87


19. Kumar, S., Abdul Akbar, M., & Bhardwaj, N. (2023). Comparative Study of Site-Specific Response Spectra and IS Code Response Spectra (Vol. 284, pp. 91–102). 
    URL: https://doi.org/10.1007/978-3-031-12011-4_8


20. Chore, H. S., Khadse, A. M., & Ahirwar, A. D. (2023). Unconfined Compressive Strength of Clayey Soil Stabilized with Marble Dust (Vol. 280, pp. 601–605). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_57


21. Sharma, K., & Kumar, A. (2023). Geotechnical Properties of Copper Slag, Rice Husk Ash Blended with Lime, Cement and Geopolymer—A Comparative Study (Vol. 280, pp. 163–174). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_15


22. Yadav, P. R., & Patel, M. (2023). Potential of Coconut Shell Powder on Geotechnical Characteristics of Stabilized Soil (Vol. 280, pp. 569–580). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_54


23. Senthil, K., Saini, K., & Kumar, M. (2023). Influence of Burial Depth of Soil on Reinforced Concrete Tunnel Against the Impact and Blast Loading (Vol. 280, pp. 193–207). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_18


24. Amruthamol, N. A., & Kapoor, K. (2023). Machine Learning Model to Forecast Concrete Compressive Strength (Vol. 522, pp. 131–140). 
    URL: https://doi.org/10.1007/978-981-19-5292-0_12


25. Ahirwar, A. D., & Chore, H. S. (2023). Effect of Addition of Slag on Engineering Properties of Clayey Soil (Vol. 280, pp. 175–180). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_16


26. Ahirwar, A. D., & Chore, H. S. (2023). Effect of Curing on Strength of Clayey Soil Stabilized with Marble Dust (Vol. 280, pp. 513–518). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_48


27. Mudekar, S. S., Patil, V. N., Chore, H. S., & Sawant, V. A. (2023). Plaxis 2D Numerical Analysis of Encased Stone Column in Soft Clay (Vol. 280, pp. 303–314). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_28


28. Thakur, N., & Chore, H. (2023). Studies on Evaluation of Effect of Sloping Ground on Lateral Pile Response: A Brief Review (Vol. 280, pp. 235–240). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_22


29. Devi, B. M., & Chore, H. S. (2023). Shear Strength Characteristics of Marble Dust-Lime Stabilized Marine Clay (Vol. 280, pp. 467–476). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_43


30. Patil, V. N., Chore, H. S., & Sawant, V. A. (2023). Bearing Capacity of Geocell Reinforced Model Fly Ash Slope (Vol. 280, pp. 591–599). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_56


31. Kannur, B., Chore, H. S., & Yede, S. (2023). Unconfined Compressive Strength of Fly Ash-Soil–lime-Fiber System (Vol. 280, pp. 581–589). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_55


32. Agnihotri, A. K., Reddy, K. R., & Chore, H. S. (2023). Preface (Vol. 280, pp. ix–x). 
    URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85144191409&partnerID=40&md5=a9208de5cbecd6458f000407f796c93e


33. Chore, H. S., Yede, S., Kannur, B., & Kumar, R. (2023). Multiple Linear Regression Analysis for Predicting Unconfined Compressive Strength of Fiber Reinforced Fly Ash Stabilized Lateritic Soil (Vol. 280, pp. 315–322). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_29


34. Chore, H. S., Yede, S., Kannur, B., & Kumar, R. (2023). Prediction of Unconfined Compressive Strength of Fly Ash–Soil–Lime–Fiber System Using Multiple Regression Analysis (Vol. 280, pp. 323–331). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_30


35. Sharma, V., & Kumar, A. (2023). Plate Load Tests on the Ring and Circular Footings (Vol. 280, pp. 209–217). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_19


36. Ahirwar, A. D., & Chore, H. S. (2023). Prediction of Unconfined Compressive Strength of Clayey Soil Stabilized with Steel Slag and Cement (Vol. 280, pp. 259–266). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_25


37. Ahirwar, A. D., & Chore, H. S. (2023). Strength Characteristics of Copper Slag and Lime Stabilized Clayey Soil (Vol. 280, pp. 531–537). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_50


38. Manjuladevi, B., & Chore, H. S. (2023). Analysis of Bagasse Ash with GBFS as a Cement-Treated Sub-Base (Vol. 280, pp. 519–530). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_49


39. Sharma, V., Kumar, A., Patel, P., & Kumar, D. (2023). Influence of Fines Content on the Strength and Compaction of the Poorly Graded Soil (Vol. 280, pp. 539–547). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_51


40. Jethwa, R. H., Momin, S. S., Devi, B. M., & Chore, H. S. (2023). Evaluation of Bagasse Ash in Stabilization of Pavement Sub-Grade (Vol. 280, pp. 477–482). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_44


41. Singh, P. K., & Kumar, A. (2023). Ring Foundation—A Review (Vol. 280, pp. 341–359). 
    URL: https://doi.org/10.1007/978-981-19-4739-1_32


42. Kumar, R., Singh, S., & Singh, P. K. (2023). A secure and efficient computation based multifactor authentication scheme for Intelligent IoT-enabled WSNs. In Computers and Electrical Engineering (Vol. 105). 
    URL: https://doi.org/10.1016/j.compeleceng.2022.108495


43. Chaurasiya, S. K., & Singh, S. (2023). Heat Transfer and Fluid Dynamics Study in Solar Air Heater Employing Impinging Circular Air Jet Array for Effective Jet Stability. In Journal of Heat Transfer (Vol. 145, Issue 1). 
    URL: https://doi.org/10.1115/1.4056004


44. Gupta, V. K., Kumar, S., Kukreja, R., & Chander, N. (2023). Experimental thermal performance investigation of a direct absorption solar collector using hybrid nanofluid of gold nanoparticles with natural extract of Azadirachta Indica leaves. In Renewable Energy (Vol. 202, pp. 1021–1031). 
    URL: https://doi.org/10.1016/j.renene.2022.12.014


45. Rani, M., Yadav, J., Shanker, U., & Sillanpää, M. (2023). Green synthesized zinc derived nanocomposites with enhanced photocatalytic activity: An updated review on structural modification, scientific assessment and environmental applications. In Inorganic Chemistry Communications (Vol. 147). 
    URL: https://doi.org/10.1016/j.inoche.2022.110246


46. Sharma, A., Kapoor, K., & Singh, P. (2023). Strength Evaluation of Fly Ash-Based Geopolymer Mortar by Using Ground-Granulated Blast Furnace Slag and Ordinary Portland Cement (Vol. 281, pp. 383–391). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_37


47. Singh, G., Kapoor, K., Singh, P., & Nazeer, M. (2023). Review on Fresh and Hardened Properties of Concrete Incorporating Silica Fume (Vol. 281, pp. 147–155). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_13


48. Ranjan, S., Singh, D., & Kumar, S. (2023). Analysis of Landfill Leachate and Contaminated Groundwater: A Review (Vol. 281, pp. 55–62). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_5


49. Yousuf, S., & Agnihotri, A. K. (2023). A Narrative Review on Emerging Nanobioremediation Toward Enhanced Environmental Sustainability (Vol. 281, pp. 11–36). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_2


50. Misra, U., Senthil, K., & Rani, K. (2023). A Review on Applications of Steel Slag in Traditional and High-Strength Concrete (Vol. 281, pp. 227–238). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_21


51. Kannur, B., & Chore, H. S. (2023). Smart Dynamic Concrete as Pavement Material (Vol. 281, pp. 377–382). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_36


52. Khan, A., Singh, S. K., Singh, D., & Kumar, T. (2023). Performance Evolution and Analytical Approach of Air Pollution Control System in Al Foundry (Vol. 281, pp. 75–82). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_7


53. Singh, N., Kapoor, K., Nazeer, M., & Singh, P. (2023). Evaluation of Mechanical and Durability Properties of Concrete Using Metakaolin: A Review (Vol. 281, pp. 339–347). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_33


54. Pastapure, V., Singh, D., & Kumar, S. (2023). Effects of Open Dumping of Municipal Solid Waste on Surrounding Soil Characteristics: A Review (Vol. 281, pp. 47–54). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_4


55. Kakkar, Y., Singh, R., & Patel, M. (2023). Utilization of Agricultural Waste for the Sustainable Production of Clay Bricks (Vol. 281, pp. 349–360). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_34


56. Ilahi, K., & Agnihotri, A. K. (2023). Future of Sustainable Landfilling Through Bioreactor Landfills: A Review (Vol. 281, pp. 361–375). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_35


57. Alam, P., Kumar, S., Singh, D., & Kumar, T. (2023). Recovery Techniques and LCA Involved with Municipal Solid Waste Bottom Ash Treatment: A Review (Vol. 281, pp. 83–93). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_8


58. Laishram, M., Singh, D., & Kumar, S. (2023). The Utilization of Industrial Waste as a Stabilizing Agent—A Review (Vol. 281, pp. 239–247). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_22


59. Agnihotri, A. K., Reddy, K. R., & Chore, H. S. (2023). Preface (Vol. 281, pp. ix–x). 
    URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142677877&partnerID=40&md5=d6e5b7d32a759b399f28b19e2d7b8d1a


60. Choudhary, A., Kapoor, K., Singh, S. P., & Singh, P. (2023). A Review on Microstructural Properties of Concrete Incorporating Different Mineral Admixtures (Vol. 281, pp. 267–272). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_24


61. Tyagi, A., Kumar, R., & Kapoor, K. (2023). Characterisation of Microsurfacing Mix Design: A Review (Vol. 281, pp. 251–265). 
    URL: https://doi.org/10.1007/978-981-19-4731-5_23


62. Reddy, K. R., Kalia, S., Tangellapalli, S., & Prakash, D. (2023). Preface (Vol. 285, p. VI). 
    URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142650224&partnerID=40&md5=99ac3162f5cd501ebd11185ba7c32a26


63. Pati, S., & Verma, O. P. (2023). Energy Assessment of a Hybrid Multiple Stage Evaporator Using Metaheuristic Algorithms (Vol. 285, pp. 413–424). 
    URL: https://doi.org/10.1007/978-981-19-5077-3_34


64. Singh, D., Tangellapalli, S., & Kukreja, R. (2023). Performance Investigation of the Ejector Humidification Dehumidification (EHD) Cycle for Fresh Water and Cooling Generation (Vol. 285, pp. 357–367). 
    URL: https://doi.org/10.1007/978-981-19-5077-3_29


65. Rout, P. R., Goel, M., Pandey, D. S., Briggs, C., Sundramurthy, V. P., Halder, N., Mohanty, A., Mukherjee, S., & Varjani, S. (2023). Technological advancements in valorisation of industrial effluents employing hydrothermal liquefaction of biomass: Strategic innovations, barriers and perspectives. In Environmental Pollution (Vol. 316). 
    URL: https://doi.org/10.1016/j.envpol.2022.120667


66. Kapoor, A., & Rajput, J. K. (2023). A prompt electrochemical monitoring platform for sensitive and selective determination of thiamethoxam using Fe2O3@g-C3N4@MSB composite modified glassy carbon electrode. In Journal of Food Composition and Analysis (Vol. 115). 
    URL: https://doi.org/10.1016/j.jfca.2022.105033


67. Singh, A. B., Awasthi, L. K., Urvashi, Shorfuzzaman, M., Alsufyani, A., & Uddin, M. (2023). Chained Dual-Generative Adversarial Network: A Generalized Defense Against Adversarial Attacks. In Computers, Materials and Continua (Vol. 74, Issue 2, pp. 2541–2555). 
    URL: https://doi.org/10.32604/cmc.2023.032795


68. Rambabu, D., Sharma, S. K., & Akbar, M. A. (2023). A review on suitability of roller-compacted concrete for constructing high traffic resisting pavements. In Innovative Infrastructure Solutions (Vol. 8, Issue 1). 
    URL: https://doi.org/10.1007/s41062-022-00989-4


69. Senthil, K., & Sharma, R. (2023). Estimation on Accuracy of Compressive and Tensile Damage Parameters of Concrete Damage Plasticity Model: Vol. 125 MMS (pp. 65–76). 
    URL: https://doi.org/10.1007/978-3-031-15758-5_6


70. Thakur, A., Kasilingam, S., & Singh, A. P. (2023). Influence of Constitutive Models on the Behaviour of Clay Brick Masonry Walls Against Multi Hit Impact Loading: Vol. 125 MMS (pp. 77–86). 
    URL: https://doi.org/10.1007/978-3-031-15758-5_7


71. Haleem, A., Javaid, M., Singh, R. P., Suman, R., & Khan, S. (2023). Management 4.0: Concept, applications and advancements. In Sustainable Operations and Computers (Vol. 4, pp. 10–21). 
    URL: https://doi.org/10.1016/j.susoc.2022.10.002


72. Meena, A., Singh, N., & Singh, S. P. (2023). High-volume fly ash Self Consolidating Concrete with coal bottom ash and recycled concrete aggregates: Fresh, mechanical and microstructural properties. In Journal of Building Engineering (Vol. 63). 
    URL: https://doi.org/10.1016/j.jobe.2022.105447


73. Senthil, K., Tewari, D., Sharma, A., & Singh, N. (2023). Influence of Parameters on the Prediction of Dynamic Impact Factor for Railway Bridges: A Review (Vol. 269, pp. 165–175). 
    URL: https://doi.org/10.1007/978-981-19-3371-4_15


74. Gokul Santhosh, S., Singh, A. P., & Abdul Akbar, M. (2023). Parametric Studies and Optimization of Grid Shell Structures Using Genetic Algorithm (Vol. 274, pp. 109–122). 
    URL: https://doi.org/10.1007/978-981-19-4055-2_10


75. Senthil, K., & Sharma, R. (2023). Comparison Study of Concrete Constitutive Models in ABAQUS for Evaluating Impact Force Under Low Velocity Impact Loading (Vol. 269, pp. 321–331). 
    URL: https://doi.org/10.1007/978-981-19-3371-4_29


76. Karan, A., Rani, N., & Akbar, M. A. (2023). Structural and Economic Characteristics of Buildings with Different Fire Ratings as Per Indian Codes (Vol. 274, pp. 835–846). 
    URL: https://doi.org/10.1007/978-981-19-4055-2_65


77. Thakur, A., & Akbar, M. A. (2023). Ductile Detailing Practices Using Confined Masonry—A Case Study of Himachal Pradesh (Vol. 274, pp. 3–15). 
    URL: https://doi.org/10.1007/978-981-19-4055-2_1


78. Aneja, V., & Rani, N. (2023). Interference Effect Between Tall Buildings with Square Cross-Sections (Vol. 274, pp. 43–54). 
    URL: https://doi.org/10.1007/978-981-19-4055-2_4


79. Kumar, A., Bawa, S., & Abdul Akbar, M. (2023). Analysis of I-Section Composite Beam with Winding Wire and Metal Strap for Development of Effective Bond (Vol. 274, pp. 291–305). 
    URL: https://doi.org/10.1007/978-981-19-4055-2_24


80. Kannur, B., & Chore, H. (2023). Laboratory Study on New Type of Self-consolidating Concrete Using Fly Ash as a Pavement Material (Vol. 260, pp. 1295–1309). 
    URL: https://doi.org/10.1007/978-981-19-2145-2_95


81. Mukhopadhyay, A., & Shaw, V. P. (2023). Reliability analysis of stretchable workwear fabric under abrasive damage: influence of stretch yarn composition. In Journal of Natural Fibers (Vol. 20, Issue 1). 
    URL: https://doi.org/10.1080/15440478.2022.2134262


82. Harimurugan, D., & Punekar, G. S. (2023). GA-CSM based optimized clearances for the reduction of occupational exposure in EHV substation☆. In Electric Power Systems Research (Vol. 214). 
    URL: https://doi.org/10.1016/j.epsr.2022.108855


83. Sudheer, L., Minhas, N., Bhadauria, S. S., & Sharma, V. (2023). Study of the Corrosion Behavior of AA6061-T6 at Different Concentrations of NaCl in Ambient Conditions (pp. 261–271). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_24


84. Gupta, K., Goyal, K. K., Kumar, R., & Singh, J. (2023). Artificial Intelligence-Based Neural Network Prediction Model for Predicting Multi-responses of Finishing Honing Process (pp. 85–95). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_8


85. Rai, D., & Vaz, A. (2023). A Simulink Model for Single-Axis Servo Control Mechanism Using Bond Graph Approach (pp. 1017–1027). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_92


86. Verma, K., Kumar, A., de Sales, L. M., Kumar, S., Sharma, A. K., & Singh, N. (2023). Enabling Real-Time Vehicle-to-Vehicle (V2V) Communication for Intelligent Transportation System (ITS) (Vol. 892, pp. 217–229). 
    URL: https://doi.org/10.1007/978-981-19-1645-8_22


87. Sinha, P., Anusha Raj, K., Kumar, S., & Singh, D. (2023). Mechanical Behavior of Geotextile and Geogrids on Soil Stabilization: A Review (pp. 299–308). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_28


88. Sinha, A., & Vaz, A. (2023). Design and Development of a Dual-Axis Solar Tracking System with Enhancements (pp. 843–852). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_76


89. Sharma, S., & Rani, R. (2023). An Ensembled Intense Approach for Image Inpainting (pp. 609–617). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_55


90. Ojha, A., Thakur, A., Bhadauria, S. S., Verma, O. P., & Sharma, V. (2023). Effect of Strain Rate on the Tensile Properties of Friction Stir Welded Aluminium Alloy AA6061-T6 (pp. 291–298). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_27


91. Kumar, K., Bhadauria, S. S., & Singh, A. P. (2023). Understanding the Behavior of Stationary Crack Embedded in C-ring Specimen (pp. 665–675). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_60


92. Kumar, M., Kumar, A., & Kumar, S. (2023). Photothermal Conversion Enhancement Study of Reverse Irradiation-Based Direct Absorption Solar Collector Using Ag Nanoparticles (pp. 281–289). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_26


93. Chauhan, K., Verma, R., & kumar, V. (2023). Fabrication of Highly Water-Repellent Surface on AISI 304 Stainless Steel Substrate Using Combination of Laser Surface Texturing and Candle Soot (pp. 51–62). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_5


94. Srivastava, S., & Srinivas, T. (2023). Comparative Study of Conventional and Proposed Organic Flash Cycle Using Waste Heat Recovery System (pp. 853–862). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_77


95. Basrani, J., Gopi, G. P. T., Bharadwaj, R., Pradeep, Kumar, M., & Kumar, P. (2023). Parametric Study of Tensile Properties of Hybrid Composite Using FEM (pp. 821–832). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_74


96. Kame, S., & Srinivas, T. (2023). Performance Analysis of Two-stage Humidification and Dehumidification Desalination with VCR (pp. 743–753). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_67


97. Sathiya, S., & Kumar, S. (2023). Investigation on the Performance of Modified Piezoelectric Cantilever Energy Harvester and Storage for Wireless Sensor Node (pp. 963–974). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_87


98. Suyal, S., & Vaz, A. (2023). An Experimental Setup for the Trajectory and Force Control of the Tip of a Three-Link Serial Manipulator (pp. 1029–1040). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_93


99. Chauhan, Y., Singh, A. K., & Veer, K. (2023). Comparative Performance Analysis of Different Membership Functions on Fuzzy Logic-Controlled Solar Tracking System (pp. 73–83). 
    URL: https://doi.org/10.1007/978-981-19-2188-9_7


100. Goel, A., Verma, O. P., & Manik, G. (2023). Flow Rate Optimization of a Parabolic Trough Solar Collector Using Multi-objective Genetic Algorithm (pp. 535–545). 
     URL: https://doi.org/10.1007/978-981-19-2188-9_49


101. Singh, S., Nimbolkar, P., Kango, S., & Sharma, N. (2023). Combined Effect of Texture and Coating on the Performance of Slider Bearings (pp. 573–586). 
     URL: https://doi.org/10.1007/978-981-19-2188-9_52


102. Srivastava, M., Pati, S., Verma, O. P., Sharma, T. K., Gupta, H., Arya, R. K., Tiwari, A. K., & Sahu, D. (2023). Minimization of Trim Loss During Reel Cutting at Paper Mill by Using Different Optimization Algorithms (pp. 1165–1181). 
     URL: https://doi.org/10.1007/978-981-19-2188-9_107


103. Gupta, N., Bagha, A. K., & Bahl, S. (2023). Optimal Location of PZT Sensors and Actuators for the Metallic and Composite Structures: A Review (pp. 189–198). 
     URL: https://doi.org/10.1007/978-981-19-2188-9_18


104. Azeem, A., Chiranjeevi, C., Sekhar, Y. R., Natarajan, M., & Srinivas, T. (2023). Performance Optimization of Chiller Used for Commercial Building Air-Conditioning. In Green Energy and Technology (pp. 509–522). 
     URL: https://doi.org/10.1007/978-981-16-8274-2_34


105. Rani, N., Ahuja, A. K., & Chauhan, B. S. (2023). Wind Pressure Distribution on Multi-span Mono-slope Canopy Roofs. In Structural Integrity (Vol. 26, pp. 508–517). 
     URL: https://doi.org/10.1007/978-3-031-05509-6_41


106. Ravaliya, N. R., Singh, L., & Akbar, M. A. (2023). Finite Element Analysis of RCC Tie End Connections Subjected to Light and Heavy Loading. In Structural Integrity (Vol. 26, pp. 263–274). 
     URL: https://doi.org/10.1007/978-3-031-05509-6_22


107. Chauhan, B. S., Ahuja, A. K., & Rani, N. (2023). Numerical Response Study of Rectangular Cross-Section Building Under Wind Interference Condition. In Structural Integrity (Vol. 26, pp. 518–529). 
     URL: https://doi.org/10.1007/978-3-031-05509-6_42


108. Pathak, M., Sharma, V. K., Kumar, R., Singh, G. D., Singh, A. P., & Patel, M. (2023). A Review of Soil Stabilization Using Resilient Modulus. In Structural Integrity (Vol. 26, pp. 155–161). 
     URL: https://doi.org/10.1007/978-3-031-05509-6_12


109. Saxena, R., & Singh, S. P. (2023). Reviewing the Mechanical Properties of FA and GGBS-Based Geo-polymer Concrete Containing Recycled Concrete Aggregates (Vol. 256, pp. 257–283). 
     URL: https://doi.org/10.1007/978-981-19-1862-9_17


110. Kumar, G., Goyal, K. K., Kumar, M., Tomer, A., Wahid, M. A., & Neha, E. (2023). Taguchi with GRA Based Optimization of Machining Parameters for End Milling of SS-304 (pp. 11–21). 
     URL: https://doi.org/10.1007/978-981-19-1618-2_2


111. Tyagi, A., Kumar, M., Kumar, G., Goyal, K. K., Neha, E., & Wahid, M. A. (2023). Application of Taguchi Approach to Optimize the Robot Spot Welding Parameters of JSC590RN Mild Steel (pp. 1–10). 
     URL: https://doi.org/10.1007/978-981-19-1618-2_1


112. Kumar, P., Gupta, M., Singh, K., & Kumar, N. (2023). Analysis of transition metal dichalcogenides materials based gas sensor using non-equilibrium green’s function. In International Journal of Numerical Modelling: Electronic Networks, Devices and Fields (Vol. 36, Issue 1). 
     URL: https://doi.org/10.1002/jnm.3036


113. Deshmukh, V., Kumar, R., & Tyagi, P. K. (2023). Performance enhancement of the photovoltaic module using a semicircular serpentine channel with binary fluids mixture. In International Journal of Green Energy (Vol. 20, Issue 2, pp. 212–225). 
     URL: https://doi.org/10.1080/15435075.2021.2025063


114. Pratibha, Kapoor, A., Rajput, J. K., & Kumar, A. (2022). Dualistic Fluorescence as Well as Portable Smartphone-Assisted RGB-Relied Sensing Assay for the Ultra-Sensitive Determination of Pendimethalin in Food and Water Samples by AIEE Active Organic Probes. In Analytical Chemistry (Vol. 94, Issue 50, pp. 17685–17691). 
     URL: https://doi.org/10.1021/acs.analchem.2c04536


115. Vaid, V., Khushbu, Nikhil, Dagar, N., & Jindal, R. (2022). Microwave-Assisted Synthesis of Guar-Gum and Carboxymethyl Cellulose-Based Hydrogel for Efficient Removal of Crystal Violet and Brilliant Green Dyes. In ChemistrySelect (Vol. 7, Issue 45). 
     URL: https://doi.org/10.1002/slct.202203138


116. Preet, A., Mukhopadhyay, A., & Midha, V. (2022). Impact of varying lactate concentration in sweat on liquid moisture transmission behaviour of layered ensembles. In Indian Journal of Fibre and Textile Research (Vol. 47, Issue 4, pp. 424–431). 
     URL: https://doi.org/10.56042/ijftr.v47i4.57165


117. Mathur, P., Sharma, T., & Veer, K. (2022). ECG for Cardiovascular Diseases Using Soft Computing Algorithms. In Current Signal Transduction Therapy (Vol. 17, Issue 3, pp. 1–8). 
     URL: https://doi.org/10.2174/1574362417666220518120229


118. Priyanka, & Zafar, M. (2022). Delta shocks and vacuum states in the Riemann solutions of Chaplygin Euler equations as pressure and magnetic field drop to zero. In Journal of Mathematical Physics (Vol. 63, Issue 12). 
     URL: https://doi.org/10.1063/5.0132580


119. Kumar, M., Kumar, P., & Bhadauria, S. S. (2022). Experimental characterization and numerical study on the interlaminar fracture toughness of carbon fibre reinforced polymer laminates reinforced with carbon nanotubes . In Materialwissenschaft und Werkstofftechnik (Vol. 53, Issue 12, pp. 1561–1574). 
     URL: https://doi.org/10.1002/mawe.202200115


120. Nayak, R., George, M., Jajpura, L., Khandual, A., & Panwar, T. (2022). Laser and ozone applications for circularity journey in denim manufacturing - A developing country perspective. In Current Opinion in Green and Sustainable Chemistry (Vol. 38). 
     URL: https://doi.org/10.1016/j.cogsc.2022.100680


121. Kumar, K., Chauhan, P. R., Kumar, R., & Bharj, R. S. (2022). IRREVERSIBILITY ANALYSIS IN Al2O3-WATER NANOFLUID FLOW WITH VARIABLE PROPERTY. In Facta Universitatis, Series: Mechanical Engineering (Vol. 20, Issue 3, pp. 503–518). 
     URL: https://doi.org/10.22190/FUME210308050K


122. Kamboj, A., Rani, R., & Nigam, A. (2022). EIQA: ear image quality assessment using deep convolutional neural network. In Sadhana - Academy Proceedings in Engineering Sciences (Vol. 47, Issue 4). 
     URL: https://doi.org/10.1007/s12046-022-02017-8


123. Rawat, S., Samyal, R., Bedi, R., & Bagha, A. K. (2022). Comparative performance of various susceptor materials and vertical cavity shapes for selective microwave hybrid heating (SMHH). In Physica Scripta (Vol. 97, Issue 12). 
     URL: https://doi.org/10.1088/1402-4896/ac9e7d


124. Kaur, M., & Bharj, J. (2022). Influence of particle size of flame-synthesized carbon nanoparticles on band gap and photoluminescence properties. In Luminescence (Vol. 37, Issue 12, pp. 2123–2128). 
     URL: https://doi.org/10.1002/bio.4402


125. Satyarathi, J., Kumar, V., Kango, S., Verma, R., Sharma, N., & Gupta, R. (2022). Comparative study of fabricated superhydrophobic surfaces via LST with carbon soot, chemical etching and auto-oxidation. In Surface Topography: Metrology and Properties (Vol. 10, Issue 4). 
     URL: https://doi.org/10.1088/2051-672X/ac9c76


126. Sakshi, & Khullar, S. (2022). Anion-directed structural diversification in four new Cd(II) compounds of a flexible polyether-based dicarboxylic acid. In Inorganic Chemistry Communications (Vol. 146). 
     URL: https://doi.org/10.1016/j.inoche.2022.110109


127. Sharma, R., Kumar, H., Singla, M., Kumar, V., Ansar, S., & Girdhar, K. (2022). Evolution of solute–solvent interactions for aqueous 1-decyl-3-methylimidazolium bromide, [C10mim] [Br] solutions containing glycine/ glycylglycine through volumetric and acoustic studies. In Chemical Data Collections (Vol. 42). 
     URL: https://doi.org/10.1016/j.cdc.2022.100963


128. Sikander, A., Dheeraj, A., Chatterjee, A., & Ahamad, N. (2022). Control design approach for improved voltage stability in microgrid energy storage system. In Microsystem Technologies (Vol. 28, Issue 12, pp. 2821–2828). 
     URL: https://doi.org/10.1007/s00542-022-05395-5


129. Kumar, V., Verma, R., & Kumar, R. (2022). Analysis of the corrosion and wear of WC-10Co-4Cr + GNPs coating applied to HSLA DH-36 steel using HVOF. In Surface Topography: Metrology and Properties (Vol. 10, Issue 4). 
     URL: https://doi.org/10.1088/2051-672X/ac998e


130. Singh, P., Velamati, R. K., & Chander, S. (2022). Effect of obliquity on impingement heating characteristics of co-axial swirling flame jet - An experimental and numerical investigation. In International Communications in Heat and Mass Transfer (Vol. 139). 
     URL: https://doi.org/10.1016/j.icheatmasstransfer.2022.106474


131. Kad, P., Choudhary, R., Bhatia, A., Walia, K., & Singh, A. (2022). Study of two cross focused Bessel–Gaussian laser beams on electron acceleration in relativistic regime. In Optik (Vol. 271). 
     URL: https://doi.org/10.1016/j.ijleo.2022.170117


132. Choudhary, S., Rani, M., Keshu, & Shanker, U. (2022). Green biosynthesized N-doped Bi2O3@SnO2 nanocomposite for efficient remediation of endocrine disrupting pesticides. In Environmental Nanotechnology, Monitoring and Management (Vol. 18). 
     URL: https://doi.org/10.1016/j.enmm.2022.100746


133. Chand, S., Mehra, R., & Chopra, V. (2022). Recent advancements in calcium based phosphate materials for luminescence applications. In Journal of Luminescence (Vol. 252). 
     URL: https://doi.org/10.1016/j.jlumin.2022.119383


134. Kumar, K., Kumar, R., & Bharj, R. S. (2022). Effect of channel miniaturization on entropy generation in hybrid corrugation configuration channel. In International Communications in Heat and Mass Transfer (Vol. 139). 
     URL: https://doi.org/10.1016/j.icheatmasstransfer.2022.106443


135. Sharma, V., & Kumar, A. (2022). Behavior of eccentrically and obliquely loaded ring footing resting on geocell-reinforced sand. In Innovative Infrastructure Solutions (Vol. 7, Issue 6). 
     URL: https://doi.org/10.1007/s41062-022-00961-2


136. Nair, A. T., Mathew, A., A R, A., & Akbar, M. A. (2022). Use of hazardous electric arc furnace dust in the construction industry: A cleaner production approach. In Journal of Cleaner Production (Vol. 377). 
     URL: https://doi.org/10.1016/j.jclepro.2022.134282


137. Thapliyal, D., Verros, G. D., & Arya, R. K. (2022). A study on residual solvent, crystallinity and thermal properties of poly(styrene)-poly(methyl methacrylate)-toluene coatings. In Progress in Organic Coatings (Vol. 173). 
     URL: https://doi.org/10.1016/j.porgcoat.2022.107216


138. Mohanta, S. R., & Veer, K. (2022). Trends and challenges of image analysis in facial emotion recognition: a review. In Network Modeling Analysis in Health Informatics and Bioinformatics (Vol. 11, Issue 1). 
     URL: https://doi.org/10.1007/s13721-022-00376-0


139. Raut, S., Chakravarty, S., Mohanty, H. S., Mahapatra, S., Bhardwaj, S., Awasthi, A. M., Kar, B., Singh, K., Chandra, M., Lakhani, A., Ganesan, V., Mishra Patidar, M., Sharma, R. K., Srihari, V., Poswal, H. K., Mukherjee, S., Giri, S., & Panigrahi, S. (2022). Effect of reentrant spinglass-like states on Schottky Anomaly and exchange bias in polycrystalline Sm0.5Y0.5Fe0.58Mn0.42O3. In Journal of Magnetism and Magnetic Materials (Vol. 563). 
     URL: https://doi.org/10.1016/j.jmmm.2022.169950


140. Ray, A., Bhowmick, N., & Ghosh, S. (2022). Designing of Woven Textile Fabrics for Greenhouse Covering Material. In Journal of The Institution of Engineers (India): Series E (Vol. 103, Issue 2, pp. 179–188). 
     URL: https://doi.org/10.1007/s40034-022-00247-3


141. Karanam, R., & Kakkar, D. (2022). Artificial neural network optimized ultra wide band fractal antenna for vehicular communication applications. In Transactions on Emerging Telecommunications Technologies (Vol. 33, Issue 12). 
     URL: https://doi.org/10.1002/ett.4620


142. Kapoor, A., Varnika, Pratibha, Rajput, J. K., Singh, D., Kumar, N., & Jigyasa. (2022). Bi2O3@MWCNT@g-C3N4 ternary nanocomposite for the efficient electrochemical determination of Riboflavin in pharmaceutical samples. In Journal of Food Composition and Analysis (Vol. 114). 
     URL: https://doi.org/10.1016/j.jfca.2022.104792


143. Sah, M. K., Mukherjee, S., Flora, B., Malek, N., & Rath, S. N. (2022). Advancement in “Garbage In Biomaterials Out (GIBO)” concept to develop biomaterials from agricultural waste for tissue engineering and biomedical applications. In Journal of Environmental Health Science and Engineering (Vol. 20, Issue 2, pp. 1015–1033). 
     URL: https://doi.org/10.1007/s40201-022-00815-0


144. Singh, R., Singh, R. P., & Trehan, R. (2022). Diametral deviation and tool wear analysis in EDM of Fe-based shape memory alloy: An experimental study with microstructural analysis and advanced optimization. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (Vol. 236, Issue 23, pp. 11282–11303). 
     URL: https://doi.org/10.1177/09544062221113258


145. Gupta, A., Jain, V., & Singh, A. (2022). Stacking Ensemble-Based Intelligent Machine Learning Model for Predicting Post-COVID-19 Complications. In New Generation Computing (Vol. 40, Issue 4, pp. 987–1007). 
     URL: https://doi.org/10.1007/s00354-021-00144-0


146. Ray, A., Ghosh, S., & Bhowmick, N. (2022). Solar Radiation Transmittance Characteristics of Textile Woven Fabrics suitable for Greenhouse covering Materials. In Journal of The Institution of Engineers (India): Series E (Vol. 103, Issue 2, pp. 293–303). 
     URL: https://doi.org/10.1007/s40034-021-00223-3


147. Gupta, P. P., Kalkhambkar, V., Jain, P., Sharma, K. C., & Bhakar, R. (2022). Battery energy storage train routing and security constrained unit commitment under solar uncertainty. In Journal of Energy Storage (Vol. 55). 
     URL: https://doi.org/10.1016/j.est.2022.105811


148. Sikka, M. P., & Mondal, M. (2022). A critical review on cleanroom filtration. In Research Journal of Textile and Apparel (Vol. 26, Issue 4, pp. 452–467). 
     URL: https://doi.org/10.1108/RJTA-02-2021-0020


149. Sharma, R. (2022). Mechanical properties, permeability and microstructure of concrete using construction and industrial waste. In International Journal of Structural Integrity (Vol. 13, Issue 6, pp. 1013–1040). 
     URL: https://doi.org/10.1108/IJSI-07-2022-0101


150. Kapoor, A., Pratibha, & Rajput, J. K. (2022). Solar light photocatalytic activity of CuO/TiO2 mixed oxide derived from conjugated azomethine metal complex for degradation of food colorants. In Journal of Molecular Liquids (Vol. 366). 
     URL: https://doi.org/10.1016/j.molliq.2022.120280


151. Pahuja, R. (2022). Development of semi-automatic recalibration sytem and curve-fit models for smart soil moisture sensor. In Measurement: Journal of the International Measurement Confederation (Vol. 203). 
     URL: https://doi.org/10.1016/j.measurement.2022.111907


152. Singh, N., Singh, A., Ankur, N., Kumar, P., Kumar, M., & Singh, T. (2022). Reviewing the properties of recycled concrete aggregates and iron slag in concrete. In Journal of Building Engineering (Vol. 60). 
     URL: https://doi.org/10.1016/j.jobe.2022.105150


153. Kaur, R., Kumar, H., Singla, M., Kumar, V., Ghfar, A. A., & Pandey, S. (2022). Synthesis and mixed micellization characteristics of pyrrolidinium SAILs in association with Sarcosine. In Materials Chemistry and Physics (Vol. 291). 
     URL: https://doi.org/10.1016/j.matchemphys.2022.126585


154. Rout, R. K., Umer, S., Sheikh, S., & Sangal, A. L. (2022). Artificial intelligence technologies for computational biology. In Artificial Intelligence Technologies for Computational Biology (pp. 1–324). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85139711557&partnerID=40&md5=d6d2e049d293b23c5f6f7ab011042dad


155. Singh, N., Ankur, N., Singh, T., Kumar, M., Singh, A., & Kumar, P. (2022). NON-DESTRUCTIVE EVALUATION OF IRON SLAG CONCRETE CONTAINING RECYCLED CONCRETE AGGREGATES. In Indian Concrete Journal (Vol. 96, Issue 11, pp. 38–50). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85144216510&partnerID=40&md5=efa14508837dc495d8d358be655fc5e0


156. Thakur, N., Singh, A., & Sangal, A. L. (2022). Cloud services selection: A systematic review and future research directions. In Computer Science Review (Vol. 46). 
     URL: https://doi.org/10.1016/j.cosrev.2022.100514


157. Gupta, H., Jindal, P., Verma, O. P., Arya, R. K., Ateya, A. A., Soliman, N. F., & Mohan, V. (2022). Computer Vision-Based Approach for Automatic Detection of Dairy Cow Breed. In Electronics (Switzerland) (Vol. 11, Issue 22). 
     URL: https://doi.org/10.3390/electronics11223791


158. Kumar, M., Sachdeva, A., Garg, R. K., & Singh, S. (2022). Using RSM to optimize crystallite size of rice husk derived graphene prepared by microwave process. In Asia-Pacific Journal of Science and Technology (Vol. 27, Issue 6). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140483823&partnerID=40&md5=76a9c953bca59e27c13fd2a9195bb627


159. Sharma, S., Sinha, S., Raina, G., Malik, P., & Katoch, S. S. (2022). Investigation and performance analysis of active solar still in colder Indian Himalayan region. In Groundwater for Sustainable Development (Vol. 19). 
     URL: https://doi.org/10.1016/j.gsd.2022.100850


160. Singh, T., Walia, K., & Singh, A. (2022). Influence of self-focused high power Cosh-Gaussian beam on second harmonic generation in cold quantum plasma. In Optik (Vol. 270). 
     URL: https://doi.org/10.1016/j.ijleo.2022.170055


161. Salman, M., Chauhan, R., Poongavanam, G. K., & Kim, S. C. (2022). Analytical investigation of jet impingement solar air heater with dimple-roughened absorber surface via thermal and effective analysis. In Renewable Energy (Vol. 199, pp. 1248–1257). 
     URL: https://doi.org/10.1016/j.renene.2022.09.092


162. Sharma, N., Sunkaria, R. K., & Sharma, L. D. (2022). QRS complex detection using stationary wavelet transform and adaptive thresholding. In Biomedical Physics and Engineering Express (Vol. 8, Issue 6). 
     URL: https://doi.org/10.1088/2057-1976/ac8e70


163. Saini, B. S., & Singh, S. P. (2022). Flexure fatigue strength and failure probability of self compacting concrete made with RCA and blended cements. In Structures (Vol. 45, pp. 299–314). 
     URL: https://doi.org/10.1016/j.istruc.2022.09.031


164. Bhatia, A., Jangir, N., Kad, P., Walia, K., & Singh, A. (2022). Second harmonic generation of zeroth-order Bessel-Gaussian laser beam in collisionless plasma. In Optik (Vol. 269). 
     URL: https://doi.org/10.1016/j.ijleo.2022.169867


165. Kaur, G., & Kakkar, D. (2022). Hybrid optimization enabled trust-based secure routing with deep learning-based attack detection in VANET. In Ad Hoc Networks (Vol. 136). 
     URL: https://doi.org/10.1016/j.adhoc.2022.102961


166. Kumar, K., Kumar, R., Bharj, R. S., & Said, Z. (2022). Effect of arc corrugation initiation on the thermo-hydraulic performance and entropy generation of the corrugated tube. In International Communications in Heat and Mass Transfer (Vol. 138). 
     URL: https://doi.org/10.1016/j.icheatmasstransfer.2022.106335


167. Rani, M., Keshu, Meenu, Sillanpää, M., & Shanker, U. (2022). An updated review on environmental occurrence, scientific assessment and removal of brominated flame retardants by engineered nanomaterials. In Journal of Environmental Management (Vol. 321). 
     URL: https://doi.org/10.1016/j.jenvman.2022.115998


168. Chakraborty, N., Juglan, K. C., Kumar, H., & Singla, M. (2022). Study of thermodynamic parameters of ternary solutions of polyethylene glycols in aqueous biotin solutions at multiple temperatures. In Journal of Chemical Thermodynamics (Vol. 174). 
     URL: https://doi.org/10.1016/j.jct.2022.106876


169. Kaim, V., Kanaujia, B. K., Kumar, S., Choi, H. C., Kim, K. W., & Rambabu, K. (2022). Electrically Small Circularly Polarized UWB Intraocular Antenna System for Retinal Prosthesis. In IEEE Transactions on Biomedical Engineering (Vol. 69, Issue 11, pp. 3504–3515). 
     URL: https://doi.org/10.1109/TBME.2022.3171842


170. Khajuria, A., Akhtar, M., & Bedi, R. (2022). A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. In Journal of Strain Analysis for Engineering Design (Vol. 57, Issue 8, pp. 647–663). 
     URL: https://doi.org/10.1177/03093247211061943


171. Kumar, H., Sarma, A. K., & Kumar, P. (2022). Experimental investigation of 2-EHN effects upon CI engine attributes fuelled with used cooking oil-based hybrid microemulsion biofuel. In International Journal of Environmental Science and Technology (Vol. 19, Issue 11, pp. 11051–11068). 
     URL: https://doi.org/10.1007/s13762-021-03751-y


172. Pattanayak, H. S., Verma, H. K., & Sangal, A. L. (2022). Lengthening of average path length in social networks due to the effect of community structure. In Journal of King Saud University - Computer and Information Sciences (Vol. 34, Issue 10, pp. 8401–8421). 
     URL: https://doi.org/10.1016/j.jksuci.2020.10.014


173. Mukherjee, S., Das, S., Sriram, N., Chakraborty, S., & Sah, M. K. (2022). In silico investigation of the role of vitamins in cancer therapy through inhibition of MCM7 oncoprotein. In RSC Advances (Vol. 12, Issue 48, pp. 31004–31015). 
     URL: https://doi.org/10.1039/d2ra03703c


174. Vaid, V., & Jindal, R. (2022). Sustained release of edaravone from (2-hydroxypropyl)-β-cyclodextrin mediated tamarind kernel powder/kappa-carrageenan hydrogel: Microwave-assisted synthesis and optimization using experimental design. In International Journal of Biological Macromolecules (Vol. 219, pp. 246–261). 
     URL: https://doi.org/10.1016/j.ijbiomac.2022.07.237


175. Shandilya, P., Sharma, R., Arya, R. K., Kumar, A., Vo, D.-V. N., & Sharma, G. (2022). Recent progress and challenges in photocatalytic water splitting using layered double hydroxides (LDH) based nanocomposites. In International Journal of Hydrogen Energy (Vol. 47, Issue 88, pp. 37438–37475). 
     URL: https://doi.org/10.1016/j.ijhydene.2021.08.190


176. Gogia, A., Khullar, S., Chanda, A., & Mandal, S. K. (2022). Effect of the flexible chain length of a dimetal subunit on the formation of 1D coordination polymers to molecular rectangles. In Dalton Transactions (Vol. 51, Issue 46, pp. 17711–17723). 
     URL: https://doi.org/10.1039/d2dt02850f


177. Singh, R., Singh, R. P., & Trehan, R. (2022). Parametric study of process parameters on MRR in electrical discharge machining of Cu-based SMA. In Fabrication and Machining of Advanced Materials and Composites: Opportunities and Challenges (pp. 255–266). 
     URL: https://doi.org/10.1201/9781003327370-14


178. Sharma, P., Tiwari, R. N., Singh, P., Kumar, P., & Kanaujia, B. K. (2022). MIMO Antennas: Design Approaches, Techniques and Applications. In Sensors (Basel, Switzerland) (Vol. 22, Issue 20). 
     URL: https://doi.org/10.3390/s22207813


179. Amirchand, K. D., Singh, V., & Islam, N. (2022). Volumetric, Compressibility, Spectroscopic, and Theoretical Evaluation of Interactions between Caffeine and Ethanolammonium Butyrate in Aqueous Solutions. In Journal of Chemical and Engineering Data (Vol. 67, Issue 10, pp. 2920–2930). 
     URL: https://doi.org/10.1021/acs.jced.2c00319


180. Sharma, S., & Patel, P. R. (2022). Simulation of graphene elastomer composites. In Graphene-Rubber Nanocomposites: Fundamentals to Applications (pp. 245–264). 
     URL: https://doi.org/10.1201/9781003200444-10


181. Saini, P., Bari, S. S., Yadav, P., Khullar, S., Mandal, S. K., & Bhalla, A. (2022). Synthesis of C2-Formamide(thiophene)pyrazolyl-C4’-carbaldehyde and their Transformation to Schiff’s Bases and Stereoselective trans-β-Lactams: Mechanistic and Theoretical Insights. In ChemistrySelect (Vol. 7, Issue 37). 
     URL: https://doi.org/10.1002/slct.202202172


182. Guru, R., Choudhary, A. K., & Dubey, M. P. (2022). Functional applications for apparel seam quality performance. In Asian Textile Journal (Vol. 31, Issue 10, pp. 51–53). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85144141475&partnerID=40&md5=142cd6a9c25189e538fdca60505b70fe


183. Chakraborty, J. N., & Thakur, J. (2022). Technology of antimicrobial finish: Chemistry, application and evaluation Part I-Chemistry. In Asian Dyer (Vol. 19, Issue 5, pp. 44–54). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85141735989&partnerID=40&md5=0a3ed89522ea471b8858f054614d00c0


184. Arya, R. K., Thapliyal, D., Verros, G. D., Singh, N., Singh, D., Kumar, R., Srivastava, R. K., & Tiwari, A. K. (2022). On the Validity of a Linearity Axiom in Diffusion and Heat Transfer. In Coatings (Vol. 12, Issue 10). 
     URL: https://doi.org/10.3390/coatings12101582


185. Khajuria, A., Akhtar, M., & Bedi, R. (2022). Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zone . In Materialwissenschaft und Werkstofftechnik (Vol. 53, Issue 10, pp. 1167–1183). 
     URL: https://doi.org/10.1002/mawe.202100152


186. Kaur, K., & Verma, H. K. (2022). An intelligent communication system for collision avoidance on roads: A smart city application. In Computers and Electrical Engineering (Vol. 103). 
     URL: https://doi.org/10.1016/j.compeleceng.2022.108398


187. Modi, J. K., Raman, A., Kumar, P., Ranjan, R., & Kumar, N. (2022). Design and performance augmentation of charge-plasma nanoFET with parametric analysis using non-equilibrium Green’s function. In Micro and Nanostructures (Vol. 170). 
     URL: https://doi.org/10.1016/j.micrna.2022.207399


188. Kaur, P., Chakraborty, N., Kumar, H., Singla, M., & Juglan, K. C. (2022). Volumetric and Ultrasonic Studies on Interactions of Hexylene and Propylene Glycols in Aqueous Solutions of Glutaraldehyde at Different Temperatures. In Journal of Solution Chemistry (Vol. 51, Issue 10, pp. 1268–1291). 
     URL: https://doi.org/10.1007/s10953-022-01192-w


189. Raman, A., Kumar, K. J., Kakkar, D., Ranjan, R., & Kumar, N. (2022). Performance Investigation of Source Delta-Doped Vertical Nanowire TFET. In Journal of Electronic Materials (Vol. 51, Issue 10, pp. 5655–5663). 
     URL: https://doi.org/10.1007/s11664-022-09840-z


190. Thakur, A., Bedi, R., Bagha, A. K., & Rao, P. S. (2022). Microstructural and mechanical properties of mild steel pipes joined using selective microwave hybrid heating. In Journal of Manufacturing Processes (Vol. 82, pp. 848–859). 
     URL: https://doi.org/10.1016/j.jmapro.2022.08.024


191. Chawla, T., Khosla, M., & Raj, B. (2022). GeSn based heterojunction double-gate tripple metal layer vertical TFET with enhanced DC and Analog/RF performance. In Micro and Nanostructures (Vol. 170). 
     URL: https://doi.org/10.1016/j.micrna.2022.207392


192. Sharma, R. (2022). Influence of waste foundry sand, metakaolin and waste glass fiber on stress strain and microstructure of construction waste aggregate concrete. In Innovative Infrastructure Solutions (Vol. 7, Issue 5). 
     URL: https://doi.org/10.1007/s41062-022-00902-z


193. Amirchand, K. D., Yambem, P., Kumar, H., & Singh, V. (2022). Vitamin C-amino acid interactions in aqueous solutions: Volumetric and interfacial properties. In Chemical Data Collections (Vol. 41). 
     URL: https://doi.org/10.1016/j.cdc.2022.100922


194. Sharma, M., Kumar, M., & Samriya, J. K. (2022). An optimistic approach for task scheduling in cloud computing. In International Journal of Information Technology (Singapore) (Vol. 14, Issue 6, pp. 2951–2961). 
     URL: https://doi.org/10.1007/s41870-022-01045-1


195. Srivastava, S., Garg, R. K., Sachdeva, A., Sharma, V. S., & Singh, S. (2022). An Experimental–Numerical Investigation for Layer-Wise-Heat-Input Management in GMA-Based Additive Manufacturing. In Journal of The Institution of Engineers (India): Series C (Vol. 103, Issue 5, pp. 1059–1070). 
     URL: https://doi.org/10.1007/s40032-022-00868-y


196. Sharma, P., Tiwari, R. N., Singh, P., & Kanaujia, B. K. (2022). Dual-band trident shaped MIMO antenna with novel ground plane for 5G applications. In AEU - International Journal of Electronics and Communications (Vol. 155). 
     URL: https://doi.org/10.1016/j.aeue.2022.154364


197. Rathi, N., Singla, R., & Tiwari, S. (2022). A comparative study of classification methods for designing a pictorial P300-based authentication system. In Medical and Biological Engineering and Computing (Vol. 60, Issue 10, pp. 2899–2916). 
     URL: https://doi.org/10.1007/s11517-022-02626-9


198. Sethi, S., Medha, & Kaith, B. S. (2022). A review on chitosan-gelatin nanocomposites: Synthesis, characterization and biomedical applications. In Reactive and Functional Polymers (Vol. 179). 
     URL: https://doi.org/10.1016/j.reactfunctpolym.2022.105362


199. Bajaj, C., Upadhyay, D. K., Kumar, S., & Kanaujia, B. K. (2022). Compact circularly polarized cross dipole antenna for RFID handheld readers/IoT applications. In AEU - International Journal of Electronics and Communications (Vol. 155). 
     URL: https://doi.org/10.1016/j.aeue.2022.154343


200. Patil, V. N., Chore, H. S., & Sawant, V. A. (2022). Bearing Capacity of Reinforced Embankment Slope Models of Fly Ash and Furnace Slag. In Transportation Infrastructure Geotechnology (Vol. 9, Issue 5, pp. 673–704). 
     URL: https://doi.org/10.1007/s40515-021-00190-7


201. Singh, B., & Verma, H. K. (2022). EMM: Extended matching market based scheduling for big data platform hadoop. In Multimedia Tools and Applications (Vol. 81, Issue 24, pp. 34823–34847). 
     URL: https://doi.org/10.1007/s11042-021-11283-3


202. Kumar, N., Kumar, R., Malik, A., & Singh, S. (2022). Low bandwidth data hiding for multimedia systems based on bit redundancy. In Multimedia Tools and Applications (Vol. 81, Issue 24, pp. 35027–35045). 
     URL: https://doi.org/10.1007/s11042-021-10832-0


203. Singh, M., Vaishali, Jamra, R., Deepika, Kumar, S., & Singh, V. (2022). Iodine-Catalysed Synthesis of β-Carboline Tethered α-Amino Amidines Through Ugi-Type Multicomponent Reaction. In ChemistrySelect (Vol. 7, Issue 35). 
     URL: https://doi.org/10.1002/slct.202202392


204. Kumar, V., Verma, R., & Bairwa, H. K. (2022). Fabrication of superhydrophobic surfaces by laser surface texturing and autoxidation. In Journal of Electrochemical Science and Engineering (Vol. 12, Issue 4, pp. 639–649). 
     URL: https://doi.org/10.5599/jese.1260


205. Rathee, M., & Singh, N. (2022). Durability properties of copper slag and coal bottom ash based I-shaped geopolymer paver blocks. In Construction and Building Materials (Vol. 347). 
     URL: https://doi.org/10.1016/j.conbuildmat.2022.128461


206. Chakraborty, N., Juglan, K. C., Kumar, H., & Singla, M. (2022). Measurement of the Density and Ultrasonic Speed of the Sound of Poly(ethylene glycols) (600 and 6000) in Aqueous Vitamin B5Solutions at Different Temperatures. In Journal of Chemical and Engineering Data (Vol. 67, Issue 9, pp. 2292–2306). 
     URL: https://doi.org/10.1021/acs.jced.2c00260


207. Yadav, S., Chandra, M., Rawat, R., Khandelwal, A., Chandra, L. S. S., Choudhary, R. J., Sathe, V., Sinha, A. K., & Singh, K. (2022). Temperature-Dependent Structural, Dielectric, and Raman Spectroscopy Studies on Magnetoelectric Co4Nb2O9. In Journal of Physical Chemistry C (Vol. 126, Issue 35, pp. 14986–14994). 
     URL: https://doi.org/10.1021/acs.jpcc.2c03259


208. Sharma, R., Kumar, H., Singla, M., Kallem, P., & Banat, F. (2022). Solvation Properties of Branched-Chain Amino Acids in Aqueous Solutions of 1-Dodecyl-3-methylimidazolium Bromide at Different Temperatures: Volumetric and Acoustic Measurements. In Journal of Chemical and Engineering Data (Vol. 67, Issue 9, pp. 2225–2241). 
     URL: https://doi.org/10.1021/acs.jced.2c00233


209. Pratibha, Kapoor, A., & Rajput, J. K. (2022). Electroactive Core-Shell Chitosan-Coated Lanthanum Iron Oxide as a Food Freshness Level Indicator for Tyramine Content Determination. In ACS Sustainable Chemistry and Engineering (Vol. 10, Issue 35, pp. 11666–11679). 
     URL: https://doi.org/10.1021/acssuschemeng.2c03747


210. Bhatia, A., Walia, K., & Singh, A. (2022). Laguerre-Gaussian laser beam guiding and its second harmonics in plasma having density ramp. In Physics of Plasmas (Vol. 29, Issue 9). 
     URL: https://doi.org/10.1063/5.0103924


211. Aggarwal, M., & Chatterjee, A. (2022). Alkali pre-treatment of jute yarns for reinforcement in epoxy composites. In Indian Journal of Fibre and Textile Research (Vol. 47, Issue 3, pp. 309–317). 
     URL: https://doi.org/10.56042/ijftr.v47i3.43765


212. Chauhan, R., & Ghosh, S. (2022). Parameters affecting needle thread tension during lockstitch process. In Indian Journal of Fibre and Textile Research (Vol. 47, Issue 3, pp. 318–325). 
     URL: https://doi.org/10.56042/ijftr.v47i3.53563


213. Dutta, S., Mukhopadhyay, A., & Das, T. (2022). Impact of activated carbon contents on cabin air filter performance at different fume flow rates. In Indian Journal of Fibre and Textile Research (Vol. 47, Issue 3, pp. 350–355). 
     URL: https://doi.org/10.56042/ijftr.v47i3.50279


214. Kumar, J. S., Raju, C. V. S., Naik, A. B., Kumar, R., & Verma, R. (2022). Effect of reinforcement and sintering on dry sliding wear and hardness of titanium - (AlSi)0.5CoFeNi based composite. In Surface Topography: Metrology and Properties (Vol. 10, Issue 3). 
     URL: https://doi.org/10.1088/2051-672X/ac8ab7


215. Kango, S., Sharma, N., Sharma, R. K., & Pandey, R. K. (2022). Experimental Investigations on Temperature and Frictional Behaviors of Textured Journal Bearings. In Tribology in Industry (Vol. 44, Issue 3, pp. 508–517). 
     URL: https://doi.org/10.24874/ti.1278.03.22.07


216. Chandra, M., Yadav, S., Srihari, V., Poswal, H. K., Rawat, R., & Singh, K. (2022). Pressure induced structural phase transition in Cr doped Mn2O3 multiferroics. In Physica Scripta (Vol. 97, Issue 9). 
     URL: https://doi.org/10.1088/1402-4896/ac88fe


217. Singh, S., Kant Sharma, S., & Abdul Akbar, M. (2022). Developing zero carbon emission pavements with geopolymer concrete: A comprehensive review. In Transportation Research Part D: Transport and Environment (Vol. 110). 
     URL: https://doi.org/10.1016/j.trd.2022.103436


218. Sachdeva, R., Bhushan, A., Bajaj, A., Gupta, M., Kumar, P., Raman, A., Ranjan, R., & Kumar, N. (2022). Investigation of variation in temperature on steep subthreshold slope nanowire tunnel field effect transistor based biosensor. In Engineering Research Express (Vol. 4, Issue 3). 
     URL: https://doi.org/10.1088/2631-8695/ac8640


219. Kumar, H., & Obrai, S. (2022). Highly sensitive and selective detection of free bilirubin using blue emitting graphene quantum dots (GQDs). In Journal of Chemical Sciences (Vol. 134, Issue 3). 
     URL: https://doi.org/10.1007/s12039-022-02079-5


220. Bhat, I., Rupali, S., & Kumar, A. (2022). Experimental and numerical analysis of constitutive characteristics in bituminous coal. In Sadhana - Academy Proceedings in Engineering Sciences (Vol. 47, Issue 3). 
     URL: https://doi.org/10.1007/s12046-022-01911-5


221. Zaidi, A. M., Kanaujia, B. K., Khan, T., Beg, M. T., Rawat, K., Rambabu, K., & Rengarajan, S. R. (2022). Multiband Design Techniques for Passive Planar Microwave Circuits: A Review. In IEEE Microwave Magazine (Vol. 23, Issue 9, pp. 57–69). 
     URL: https://doi.org/10.1109/MMM.2022.3180496


222. Raja Ram, N., & Nikhil, G. N. (2022). A critical review on sustainable biogas production with focus on microbial-substrate interactions: bottlenecks and breakthroughs. In Bioresource Technology Reports (Vol. 19). 
     URL: https://doi.org/10.1016/j.biteb.2022.101170


223. Hassan, K., Kang, A. S., Prakash, C., & Singh, G. (2022). SUSTAINABLE MACHINING CHARACTERISTICS EVALUATION OF BORING OPERATION UNDER DIFFERENT LUBRICATING CONDITIONS. In Surface Review and Letters (Vol. 29, Issue 9). 
     URL: https://doi.org/10.1142/S0218625X22501189


224. Sai, K., Sood, N., & Saini, I. (2022). Classification of various nutrient deficiencies in tomato plants through electrophysiological signal decomposition and sample space reduction. In Plant Physiology and Biochemistry (Vol. 186, pp. 266–278). 
     URL: https://doi.org/10.1016/j.plaphy.2022.07.022


225. Chakraborty, N., Juglan, K. C., & Kumar, H. (2022). Thermodynamics of various interactions in homologous series of polyethylene glycols in aqueous medium of d-panthenol at T = (288.15, 298.15, 308.15 and 318.15) K: a volumetric and acoustic approach. In Brazilian Journal of Chemical Engineering (Vol. 39, Issue 3, pp. 869–884). 
     URL: https://doi.org/10.1007/s43153-021-00163-w


226. Kumar, P., Kumar, S., & Veer, K. (2022). Even After Vaccination, is the Second Wave of COVID-19 in India More Dangerous? In Current Signal Transduction Therapy (Vol. 17, Issue 2). 
     URL: https://doi.org/10.2174/1574362417666220404115140


227. Sharma, S., & Veer, K. (2022). Evaluation and Prediction of End of Second-wave and Starting of Third-wave Covid-19 Cases in India. In Current Signal Transduction Therapy (Vol. 17, Issue 2, pp. 4–10). 
     URL: https://doi.org/10.2174/1574362417666220307100017


228. Kaur, R., Kumar, H., Kumar, B., Singla, M., Kumar, V., Ghfar, A. A., & Pandey, S. (2022). Effect of amino acid on the surface adsorption and micellar properties of surface active ILs varying in cationic head groups. In Heliyon (Vol. 8, Issue 8). 
     URL: https://doi.org/10.1016/j.heliyon.2022.e10363


229. Agarwal, N., Sikka, G., & Awasthi, L. K. (2022). A systematic literature review on web service clustering approaches to enhance service discovery, selection and recommendation. In Computer Science Review (Vol. 45). 
     URL: https://doi.org/10.1016/j.cosrev.2022.100498


230. Abuhussain, M. A., Al-Tamimi, N., Alotaibi, B. S., Singh, M. K., Kumar, S., & Elnaklah, R. (2022). Impact of Courtyard Concept on Energy Efficiency and Home Privacy in Saudi Arabia. In Energies (Vol. 15, Issue 15). 
     URL: https://doi.org/10.3390/en15155637


231. Verma, S., Zeadally, S., Kaur, S., & Sharma, A. K. (2022). Intelligent and Secure Clustering in Wireless Sensor Network (WSN)-Based Intelligent Transportation Systems. In IEEE Transactions on Intelligent Transportation Systems (Vol. 23, Issue 8, pp. 13473–13481). 
     URL: https://doi.org/10.1109/TITS.2021.3124730


232. Kad, P., & Singh, A. (2022). Electron acceleration and spatio-temporal variation of Laguerre-Gaussian laser pulse in relativistic plasma. In European Physical Journal Plus (Vol. 137, Issue 8). 
     URL: https://doi.org/10.1140/epjp/s13360-022-03054-2


233. Gupta, H., Varshney, H., Sharma, T. K., Pachauri, N., & Verma, O. P. (2022). Comparative performance analysis of quantum machine learning with deep learning for diabetes prediction. In Complex and Intelligent Systems (Vol. 8, Issue 4, pp. 3073–3087). 
     URL: https://doi.org/10.1007/s40747-021-00398-7


234. Bala, S., Singh, H., Kamboj, P., & Raj, B. (2022). Silicon Material Based Tunnel FET for Controlling Ambipolar Current. In Silicon (Vol. 14, Issue 12, pp. 6713–6718). 
     URL: https://doi.org/10.1007/s12633-021-01452-2


235. Jangir, H. K., & Satavalekar, R. (2022). Evaluating Adaptive Neuro-Fuzzy Inference System (ANFIS) to Assess Liquefaction Potential and Settlements Using CPT Test Data. In Journal of Soft Computing in Civil Engineering (Vol. 6, Issue 3, pp. 119–139). 
     URL: https://doi.org/10.22115/SCCE.2022.345237.1456


236. Sharma, N., Singh, G., Sharma, R. C., Sharma, A., & Goyal, K. K. (2022). Magnesium-Based Nanocomposites: An Overview of Applications and Challenges. In Powder Metallurgy and Metal Ceramics (Vol. 61, Issues 3–4, pp. 205–220). 
     URL: https://doi.org/10.1007/s11106-022-00307-8


237. Qureshi, M. R. N. M., Almuflih, A. S., Sharma, J., Tyagi, M., Singh, S., & Almakayeel, N. (2022). Assessment of the Climate-Smart Agriculture Interventions towards the Avenues of Sustainable Production–Consumption. In Sustainability (Switzerland) (Vol. 14, Issue 14). 
     URL: https://doi.org/10.3390/su14148410


238. Chand, K., & Khosla, A. (2022). BioNES: A plug-and-play MATLAB-based tool to use NES games for multimodal biofeedback. In SoftwareX (Vol. 19). 
     URL: https://doi.org/10.1016/j.softx.2022.101184


239. Dagar, R., Yadav, S., Kinha, M., Mehra, B. S., Rawat, R., Singh, K., & Rana, D. S. (2022). Magnetic-field-controlled multitude of spin excitation modes in magnetoelectric Co4Nb2 O9 as investigated by magnetoterahertz spectroscopy. In Physical Review Materials (Vol. 6, Issue 7). 
     URL: https://doi.org/10.1103/PhysRevMaterials.6.074409


240. Ayoub Shaikh, T., Rasool, T., & Rasheed Lone, F. (2022). Towards leveraging the role of machine learning and artificial intelligence in precision agriculture and smart farming. In Computers and Electronics in Agriculture (Vol. 198). 
     URL: https://doi.org/10.1016/j.compag.2022.107119


241. Pratibha, Kumar, N., Kapoor, A., Rajput, J. K., Singh, D., & Varnika. (2022). Fabrication and Characterization of Sulphur-Doped Graphitic Carbon Nitride Nanosheets as a Highly Selective and Ultrasensitive Electrochemical Sensor for Detection of 2,4-Dinitrophenol in Real Gym Supplements. In Electroanalysis. 
     URL: https://doi.org/10.1002/elan.202200283


242. Upadhyay, U., Raman, A., Ranjan, R., & Kumar, N. (2022). Overlapped Gate-Source/Drain H-shaped TFET: Proposal, Design and Linearity Analysis. In Silicon (Vol. 14, Issue 11, pp. 6415–6424). 
     URL: https://doi.org/10.1007/s12633-021-01404-w


243. Singh, S., Verma, A., Singh, J., & Wadhwa, G. (2022). Investigation of N + SiGe Gate Stacked V-TFET Based on Dopingless Charge Plasma for Gas Sensing Application. In Silicon (Vol. 14, Issue 11, pp. 6205–6218). 
     URL: https://doi.org/10.1007/s12633-021-01416-6


244. Kumar, P., & Raj, B. (2022). Parametric Investigation and Design of Junctionless Nanowire Tunnel Field Effect Transistor. In Silicon (Vol. 14, Issue 11, pp. 6031–6037). 
     URL: https://doi.org/10.1007/s12633-021-01371-2


245. Singh, S., Chaudhary, T., & Khanna, G. (2022). Recent Advancements in Wide Band Semiconductors (SiC and GaN) Technology for Future Devices. In Silicon (Vol. 14, Issue 11, pp. 5793–5800). 
     URL: https://doi.org/10.1007/s12633-021-01362-3


246. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Suman, R., & Khan, I. H. (2022). Evolutionary trends in progressive cloud computing based healthcare: Ideas, enablers, and barriers. In International Journal of Cognitive Computing in Engineering (Vol. 3, pp. 124–135). 
     URL: https://doi.org/10.1016/j.ijcce.2022.06.001


247. Devi, M., & Aujla, J. S. (2022). A NORM INEQUALITY FOR SOME SPECIAL FUNCTIONS. In Operators and Matrices (Vol. 16, Issue 2, pp. 447–455). 
     URL: https://doi.org/10.7153/oam-2022-16-34


248. Pawar, K. S., Bagha, A. K., Bahl, S., & Agrawal, M. K. (2022). Experimental investigation for the dynamic characteristics of short natural fiber reinforced composite materials. In Indian Journal of Engineering and Materials Sciences (Vol. 29, Issue 3, pp. 366–377). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85129956783&partnerID=40&md5=f1c940e3ef197d2b9c58c1fa763d2f36


249. Jain, V. K., & Chatterjee, A. (2022). Graphene coated cotton nonwoven for electroconductive and UV protection applications. In Journal of Industrial Textiles (Vol. 51, Issue 3_suppl, pp. 4390S-4409S). 
     URL: https://doi.org/10.1177/15280837211059202


250. Singh, R. K., & Verma, H. K. (2022). Effective Parallel Processing Social Media Analytics Framework. In Journal of King Saud University - Computer and Information Sciences (Vol. 34, Issue 6, pp. 2860–2870). 
     URL: https://doi.org/10.1016/j.jksuci.2020.04.019


251. Pratap, A., & Rani, N. (2022). Review of international wind codes and recent research on mono-slope canopy roof. In Wind and Structures, An International Journal (Vol. 34, Issue 4, pp. 371–383). 
     URL: https://doi.org/10.12989/was.2022.34.4.371


252. Srivastava, A., Prabhakar, M. R., Mohanty, A., & Meena, S. S. (2022). Influence of gut microbiome on the human physiology. In Systems Microbiology and Biomanufacturing (Vol. 2, Issue 2, pp. 217–231). 
     URL: https://doi.org/10.1007/s43393-021-00052-w


253. Wadhera, T., & Kakkar, D. (2022). Enabling technology for neurodevelopmental disorders: From diagnosis to rehabilitation. In Enabling Technology for Neurodevelopmental Disorders: From Diagnosis to Rehabilitation (pp. 1–251). 
     URL: https://doi.org/10.4324/9781003165569


254. Malhotra, R., Saini, B. S., & Gupta, S. (2022). Future visions for deep-learning-based approaches for NDDs: Learning from supervised brain tumor segmentation. In Enabling Technology for Neurodevelopmental Disorders: From Diagnosis to Rehabilitation (pp. 194–209). 
     URL: https://doi.org/10.4324/9781003165569-13


255. Singh, K., Saini, I., & Sood, N. (2022). Analysis Of Cardiovascular, Cardiorespiratory, and Vasculo- Respiratory Signals Using Different Machine Learning Techniques. In Biomedical Engineering - Applications, Basis and Communications. 
     URL: https://doi.org/10.4015/S1016237222500454


256. Gupta, S., Patil, S., Dalela, C., & Kanaujia, B. K. (2022). Circularly polarized fractal defected ground monopole antenna for Bluetooth/LTE/CNSS/S-band and CA- band applications. In Electromagnetics. 
     URL: https://doi.org/10.1080/02726343.2022.2154466


257. Bhandari, K., Kumar, K., & Sangal, A. L. (2022). Data quality issues in software fault prediction: a systematic literature review. In Artificial Intelligence Review. 
     URL: https://doi.org/10.1007/s10462-022-10371-6


258. Vaishali, N., Malakar, C. C., & Singh, V. (2022). A cascade A3 coupling strategy towards the regioselective synthesis of β-carboline N-fused pyrrole derivatives with pyridine tethers. In New Journal of Chemistry. 
     URL: https://doi.org/10.1039/d2nj04620b


259. Sharma, S., & Prakash, G. (2022). Expatriates and social support: exploring conceptual role of unconscious bias. In International Journal of Business Excellence (Vol. 28, Issue 4, pp. 492–504). 
     URL: https://doi.org/10.1504/ijbex.2022.127495


260. Preet, A., Mukhopadhyay, A., & Midha, V. K. (2022). Impact of varying lactate concentration in sweat on thermo-physiological comfort of multi-layered ensembles. In International Journal of Clothing Science and Technology. 
     URL: https://doi.org/10.1108/IJCST-12-2021-0176


261. Singh, R., Singh, R. P., & Trehan, R. (2022). Electrical discharge machining of Fe-based shape memory alloy: Parametric evaluation with microstructure analysis. In Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 
     URL: https://doi.org/10.1177/09544089221140636


262. Maurya, S. K., Bhatrola, K., Kothiyal, N. C., & Choudhary, M. (2022). Comparative effects of nano-silica and graphene oxide on Pozzolana Portland cement nanocomposites. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.12.019


263. Kumar, S., & Sikander, A. (2022). A novel hybrid framework for single and multi-robot path planning in a complex industrial environment. In Journal of Intelligent Manufacturing. 
     URL: https://doi.org/10.1007/s10845-022-02056-2


264. Kapoor, A., Singh, D., Pratibha, Rajput, J. K., Kumar, N., & Varnika. (2022). Investigation on solar light assisted degradation of perilous Chromotrope-FB and Ponceau-BS colorants by Ag-doped ZrFe2O4: a greener environmental remediation approach. In International Journal of Environmental Analytical Chemistry. 
     URL: https://doi.org/10.1080/03067319.2022.2153679


265. Gupta, H., & Verma, O. P. (2022). Normalization free Siamese network for object tracking. In Expert Systems. 
     URL: https://doi.org/10.1111/exsy.13214


266. Kumar, A., & Kumar, N. (2022). Parametric investigation into the transparency of PLA parts fabricated through fused filament fabrication. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2153518


267. Magotra, B., Malhotra, D., & Dogra, A. K. (2022). Correction to: Adaptive Computational Solutions to Energy Efficiency in Cloud Computing Environment Using VM Consolidation (Archives of Computational Methods in Engineering, (2022), 10.1007/s11831-022-09852-2). In Archives of Computational Methods in Engineering. 
     URL: https://doi.org/10.1007/s11831-022-09868-8


268. Choudhary, D., & Pahuja, R. (2022). Artificial flora optimization algorithm in connected vehicular network. In International Journal of System Assurance Engineering and Management. 
     URL: https://doi.org/10.1007/s13198-022-01798-9


269. Gupta, S., & Kumar Singh, A. (2022). A comparative study for the estimation of Global solar radiation using different input variable selection techniques. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.260


270. Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022). 3D printing applications for healthcare research and development. In Global Health Journal. 
     URL: https://doi.org/10.1016/j.glohj.2022.11.001


271. Bellache, R., Hammiche, D., Boukerrou, A., & Singh Kaith, B. (2022). Prickly pear seed oil (PPSO) encapsulated by biodegradable polymer Poly-hydroxy-butyrate-co-valerate (PHBV). In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.441


272. Bhatrola, K., Maurya, S. K., Kaur, R., & Kothiyal, N. C. (2022). Mechanical and electrical resistivity performance of Pozzolana Portland cement mortar admixed graphene oxide. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.414


273. Kumar, R., & Sikander, A. (2022). A new order abatement method based on Atom search optimization. In International Journal of Dynamics and Control. 
     URL: https://doi.org/10.1007/s40435-022-01094-1


274. Dash, P., Parmar, G., & Sikander, A. (2022). A novel strategy for order abatement based on parameter estimation. In Microsystem Technologies. 
     URL: https://doi.org/10.1007/s00542-022-05406-5


275. Tyagi, V., & Singh, S. (2022). A novel energy efficient routing technique for SDN-enabled underwater WSNs using free-space optical communication. In Journal of Optical Communications. 
     URL: https://doi.org/10.1515/joc-2022-0204


276. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Suman, R., & Kumar, R. (2022). Studies on the Metrological Need and Capabilities of 3D Scanning Technologies. In Journal of Industrial Integration and Management. 
     URL: https://doi.org/10.1142/S2424862222500257


277. Akula, V. S. R. P., Goyal, K. K., Verma, O. P., & Gupta, V. (2022). Feasibility study of a 3D printed BLDC outrunner rotor. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.090


278. Rani, M., Meenu, & Shanker, U. (2022). The role of nanomaterials in plastics biodegradability. In Biodegradability of Conventional Plastics: Opportunities, Challenges, and Misconceptions (pp. 283–308). 
     URL: https://doi.org/10.1016/B978-0-323-89858-4.00012-9


279. Singh, P., & Kapoor, K. (2022). Development of mix design method based on statistical analysis of different factors for geopolymer concrete. In Frontiers of Structural and Civil Engineering. 
     URL: https://doi.org/10.1007/s11709-022-0853-x


280. Sakshi, & Khullar, S. (2022). Synthesis and Characterization of a Cd(II) complex: Anion interaction and Fabrication of Cadmium oxide nanoparticles. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.217


281. Sheetal, Tyagi, R., & Singh, G. (2022). Gamification and customer experience in online retail: a qualitative study focusing on ethical perspective. In Asian Journal of Business Ethics. 
     URL: https://doi.org/10.1007/s13520-022-00162-1


282. Uppal, S. K., & Vaz, A. (2022). Bond Graph Modeling of Muscle-Tendon Actuation of a Phalange. In Computer Assisted Methods in Engineering and Science (Vol. 29, Issue 3, pp. 197–227). 
     URL: https://doi.org/10.24423/cames.411


283. Rani, S., Kansal, S., Singla, A. K., Nazir, S., & Mehra, R. (2022). Investigation of indoor 222Rn, 220Rn and their progeny in Punjab, northwestern India. In Journal of Radioanalytical and Nuclear Chemistry. 
     URL: https://doi.org/10.1007/s10967-022-08674-7


284. Kumar, R., & Malik, A. (2022). Multimedia information hiding method for AMBTC compressed images using LSB substitution technique. In Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-14221-z


285. Saluja, D., Singh, R., Saluja, N., & Kumar, S. (2022). Connectivity Improvement of Hybrid Millimeter Wave and Microwave Vehicular Networks. In IEEE Transactions on Intelligent Transportation Systems (pp. 1–9). 
     URL: https://doi.org/10.1109/TITS.2022.3221337


286. Pathak, K., & Sharma, V. (2022). Urban ‘Prosumers’ of Solar Energy: Exploring the Mediating Role of Government Initiatives. In Vision. 
     URL: https://doi.org/10.1177/09722629221130610


287. Gupta, P., Tripathi, S., Singh, S., & Gupta, V. S. (2022). MPPT-EPO optimized solar energy harvesting for maximizing the WSN lifetime. In Peer-to-Peer Networking and Applications. 
     URL: https://doi.org/10.1007/s12083-022-01405-5


288. Kumar, R., Kumar, S., & Kanaujia, B. K. (2022). Design of an RF output Class JJ−1 Doherty power amplifier using post-matching varactor diodes for configurable IoT transmitters. In International Journal of Circuit Theory and Applications. 
     URL: https://doi.org/10.1002/cta.3507


289. Saini, B. S., & Singh, S. P. (2022). Fatigue lives of self compacting concrete containing recycled concrete aggregates and blended cements. In Structural Concrete. 
     URL: https://doi.org/10.1002/suco.202200071


290. Raman, A., Shekhar, D., & Kumar, N. (2022). Sub-Micron Semiconductor Devices: Design And Application. In Sub-Micron Semiconductor Devices: Design and Applications (pp. 1–391). 
     URL: https://doi.org/10.1201/9781003126393


291. Kumar, P., Gupta, M., Singh, K., Gupta, A. K., & Kumar, N. (2022). Design and analysis of transition metal dichalcogenide-based feedback transistor. In Sub-Micron Semiconductor Devices: Design and Applications (pp. 309–317). 
     URL: https://doi.org/10.1201/9781003126393-19


292. Gupta, A. K., Raman, A., Kumar, N., Shekhar, D., & Kumar, P. (2022). Design and analysis of dopingless charge-plasma-based ring architecture of tunnel field-effect transistor for low-power application. In Sub-Micron Semiconductor Devices: Design and Applications (pp. 235–267). 
     URL: https://doi.org/10.1201/9781003126393-15


293. Kumar, P., Gupta, M., Singh, K., & Gupta, A. K. (2022). Study of transition metal dichalcogenides in junctionless transistors and effect of variation in dielectric oxide. In Sub-Micron Semiconductor Devices: Design and Applications (pp. 39–48). 
     URL: https://doi.org/10.1201/9781003126393-3


294. Singh, G. R., Gupta, M. K., Mia, M., & Sharma, V. S. (2022). Correction to: Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques (The International Journal of Advanced Manufacturing Technology, (2018), 97, 1-4, (481-494), 10.1007/s00170-018-1911-3). In International Journal of Advanced Manufacturing Technology. 
     URL: https://doi.org/10.1007/s00170-022-10570-z


295. Gupta, M. K., Mia, M., Pruncu, C. I., Kapłonek, W., Nadolny, K., Patra, K., Mikolajczyk, T., Pimenov, D. Y., Sarikaya, M., & Sharma, V. S. (2022). Correction to: Parametric optimization and process capability analysis for machining of nickel-based superalloy (The International Journal of Advanced Manufacturing Technology, (2019), 102, 9-12, (3995-4009), 10.1007/s00170-019-03453-3). In International Journal of Advanced Manufacturing Technology. 
     URL: https://doi.org/10.1007/s00170-022-10571-y


296. Dinesh, K., Singh, P., Jithin, E. V, Kishore, V. R., & Chander, S. (2022). Impingement Heating Characteristics of Domestic Gas Burner Flames. In Heat and Mass Transfer/Waerme- und Stoffuebertragung. 
     URL: https://doi.org/10.1007/s00231-022-03312-0


297. Pastapure, V., Singh, D., & Kumar, S. (2022). Engineering behavior of municipal solid waste incinerated bottom ash with the addition of lime. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.112


298. Srivastava, A., Sharma, S., & Patel, P. R. (2022). Atomistic Modeling of Mechanical Properties and Creep Behavior of Graphene Oxide Reinforced Natural Rubber Composites. In Macromolecular Theory and Simulations. 
     URL: https://doi.org/10.1002/mats.202200053


299. Kumar Patnaik, R., & Divya, N. (2022). A brief review on the synthesis of TiO2 thin films and its application in dye degradation. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.064


300. Walia, Y., & Kumar Verma, P. (2022). Demonstration of Normally-OFF recessed MIS-Gate technique on AlGaN/GaN HEMT for improved power dissipation. In Materials Today: Proceedings (Vol. 71, pp. 420–424). 
     URL: https://doi.org/10.1016/j.matpr.2022.10.119


301. Kumar, S., Abdul Akbar, M., & Thakur, A. (2022). Seismic analysis of a G + 3 confined masonry building with AAC infill using SAP 2000. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.282


302. Shivani, & Rani, D. (2022). Multi-objective multi-item four dimensional green transportation problem in interval-valued intuitionistic fuzzy environment. In International Journal of System Assurance Engineering and Management. 
     URL: https://doi.org/10.1007/s13198-022-01794-z


303. Kushawaha, D., Yadav, S., Singh, D. K., & Behera, P. K. (2022). THERMO-DIFFUSION MHD CONVECTION IN ENCLOSURE USING HEAT AND MASS LINES VISUALIZATION TECHNIQUES. In Journal of Applied Mathematics and Computational Mechanics (Vol. 21, Issue 2, pp. 63–76). 
     URL: https://doi.org/10.17512/jamcm.2022.2.06


304. Kumar, R., Singh Bhadauria, S., Sharma, V., & Kumar, M. (2022). Effect on microstructure and mechanical properties of single pass friction stir welded aluminium alloy AA-7075-T651 joint. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.111


305. Sadhya, S., Goyal, K. K., Singh, G., Singh, J., & Akula, V. S. R. P. (2022). Development of lab-scale extruder to produce feedstock filament for 3D printing using recycled thermoplastics. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.11.028


306. Ranjan, S., Singh, D., & Kumar, S. (2022). Kaolinite subgrade strength characteristics variation with RBI Grade 81. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.288


307. Shiza, N., & Kumar Singh, A. (2022). A Study on control strategies utilized for performance enhancement of antilock braking system. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.287


308. Kumar, R., Bhardwaj, A., Singh, L. P., & Singh, G. (2022). Environmental Impact Assessment of Maize Production in Northern India (Vol. 1084, Issue 1). 
     URL: https://doi.org/10.1088/1755-1315/1084/1/012042


309. Prakash, C., Singh, L. P., & Gupta, A. (2022). Investigation into the Compressive Stress on Lumbar Spine among Tractor Drivers during different Ride Conditions (Vol. 1084, Issue 1). 
     URL: https://doi.org/10.1088/1755-1315/1084/1/012064


310. Singh, S., Kumar, M., Verma, O. P., Kumar, R., & Gill, S. S. (2022). An IIoT based secure and sustainable smart supply chain system using sensor networks. In Transactions on Emerging Telecommunications Technologies. 
     URL: https://doi.org/10.1002/ett.4681


311. Sharma, D., & Verma, H. K. (2022). Malware Signature and Behavior Performance Evaluation utilizing Packers. 
     URL: https://doi.org/10.1109/ASIANCON55314.2022.9909111


312. Kumar, S., & Partap, G. (2022). Analysis of waves in micropolar generalized thermoelastic plate with memory dependent derivatives. In ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik. 
     URL: https://doi.org/10.1002/zamm.202200244


313. Shome, P. P., Khan, T., Kanaujia, B. K., Kishk, A. A., & Antar, Y. M. (2022). Unidirective Miniaturized Ultrawideband Antenna for Sensing Buried Objects in Handheld Ground-Penetrating Radar Systems: A design approach. In IEEE Antennas and Propagation Magazine (pp. 2–12). 
     URL: https://doi.org/10.1109/MAP.2022.3203311


314. Goel, A., Manik, G., & Verma, O. P. (2022). Inspection of dynamic modelling and control of a parabolic trough solar collector. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.170


315. Laishram, M., Singh, D., & Kumar, S. (2022). Geotechnical investigations on Alccofine stabilized kaolin clay. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.10.118


316. Kannur, B., & Chore, H. S. (2022). Strength and durability study of low-fines self-consolidating concrete as a pavement material using fly ash and bagasse ash. In European Journal of Environmental and Civil Engineering. 
     URL: https://doi.org/10.1080/19648189.2022.2140207


317. Kumar, K., Kapoor, K., Singh, R. B., & Singh, P. (2022). Durability behaviour of self-compacting concrete containing high-volume fly ash and alternative aggregates. In Proceedings of the Institution of Civil Engineers: Engineering Sustainability. 
     URL: https://doi.org/10.1680/jensu.22.00059


318. Singh, G., Aggarwal, V., Singh, S., Garg, R. K., & Singh, B. (2022). Experimental and Analytical Investigation into Cutting Forces during Turning of EN-31 Steel in Different Machining Conditions. In Key Engineering Materials (Vol. 933, pp. 42–61). 
     URL: https://doi.org/10.4028/p-d72alb


319. Khan, M., Alam, M., Basheer, S., Ansari, M. D., & Kumar, N. (2022). A MapReduce Clustering Approach for Sentiment Analysis Using Big Data. In Cognitive Science and Technology (pp. 223–229). 
     URL: https://doi.org/10.1007/978-981-19-2350-0_22


320. Rana, S., Kumar, R., & Bharj, R. S. (2022). Lithium-Ion Battery Thermal Management Techniques and Their Current Readiness Level. In Energy Technology. 
     URL: https://doi.org/10.1002/ente.202200873


321. Yadav, J., Rani, M., Shanker, U., & Sillanpää, M. (2022). Efficient photocatalytic degradation of emerging pollutants by green synthesized Prussian blue analogue nanocomposite. In Environmental Progress and Sustainable Energy. 
     URL: https://doi.org/10.1002/ep.14009


322. Chauhan, S., Trehan, R., & Singh, R. P. (2022). State of the art in finite element approaches for milling process: a review. In Advances in Manufacturing. 
     URL: https://doi.org/10.1007/s40436-022-00417-x


323. Sharma, J., Tyagi, M., & Bhardwaj, A. (2022). Exploration of the avenues for adoption of the thermal based food processing technologies in manufacturing arena. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2136055


324. Malik, P., Kumar, S., Khushboo, Upmanyu, A., Kumar, P., & Malik, P. (2022). Thermo-acoustical studies of zinc oxide nano particles dispersed nematic liquid crystals mixtures in the temperatures range 283.15 K318.15K. In Liquid Crystals (Vol. 49, Issue 12, pp. 1604–1611). 
     URL: https://doi.org/10.1080/02678292.2022.2102684


325. Tiwari, R. N., Singh, P., Kumar, P., & Kanaujia, B. K. (2022). High Isolation 4-Port UWB MIMO Antenna with Novel Decoupling Structure for High Speed and 5G Communication (pp. 336–339). 
     URL: https://doi.org/10.1109/ICEAA49419.2022.9900029


326. Kaur, M., Bharj, J., & Bharj, R. S. (2022). Carbon Nanostructure-based Glass Composites: A Review. In Transactions of the Indian Institute of Metals. 
     URL: https://doi.org/10.1007/s12666-022-02806-z


327. Srivastava, J., Mal, J., Verma, M., Singh, S., & Sinha, R. (2022). In silico investigation of endoglucanase produced by Bacillus inaquosorum KCTC 13429 for valorisation of lignocellulosic biomass. In Biomass Conversion and Biorefinery. 
     URL: https://doi.org/10.1007/s13399-022-03423-y


328. Khushbu, & Jindal, R. (2022). Sodium Alginate and Chitosan Based Amphoteric Nanocomposites Modified with Graphene Oxide and Bentonite as an Efficient Adsorbent for Both Anionic and Cationic Dyes. In Journal of Polymers and the Environment. 
     URL: https://doi.org/10.1007/s10924-022-02626-8


329. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Suman, R., & Kumar, L. (2022). Utilization of Robotics for Healthcare: A Scoping Review. In Journal of Industrial Integration and Management. 
     URL: https://doi.org/10.1142/S2424862222500154


330. Kaur, S., Rani, R., Garg, R., & Sharma, N. (2022). State-of-the-art techniques for passive image forgery detection: a brief review. In International Journal of Electronic Security and Digital Forensics (Vol. 14, Issue 5, pp. 456–473). 
     URL: https://doi.org/10.1504/IJESDF.2022.125403


331. Kaur, P., & Jana, A. K. (2022). Amino functionalization of magnetic multiwalled carbon nanotubes with flexible hydrophobic spacer for immobilization of Candida rugosa lipase and application in biocatalytic production of fruit flavour esters ethyl butyrate and butyl butyrate. In Applied Nanoscience (Switzerland). 
     URL: https://doi.org/10.1007/s13204-022-02657-6


332. Modak, S., Shome, P. P., Halimi, M. A., Khan, T., Kishk, A. A., & Denidni, T. A. (2022). Band-Stop Filtering for Electromagnetic Interference Rejection in Printed UWB Components Using Single Compact Archimedean Spiral EBG Cell. In Progress In Electromagnetics Research C (Vol. 126, pp. 23–37). 
     URL: https://doi.org/10.2528/PIERC22082407


333. Tripathi, S., Raman, A., & Sunkaria, R. K. (2022). Pentacene-Based Hybrid Photodetectors: A Review (Vol. 911, pp. 617–626). 
     URL: https://doi.org/10.1007/978-981-19-2631-0_53


334. Kumar, A., & Kumar, R. (2022). ηB Interactions in the Strange Baryonic Matter (Vol. 277, pp. 329–332). 
     URL: https://doi.org/10.1007/978-981-19-2354-8_59


335. Kandwal, A., Li, J., Igbe, T., Liu, Y., Das, R., Kanaujia, B. K., & Nie, Z. (2022). Young’s Double Slit Method-Based Higher Order Mode Surface Plasmon Microwave Antenna Sensor: Modeling, Measurements, and Application. In IEEE Transactions on Instrumentation and Measurement (Vol. 71). 
     URL: https://doi.org/10.1109/TIM.2022.3214289


336. Javaid, M., Haleem, A., Singh, R. P., Rab, S., & Suman, R. (2022). Significant applications of Cobots in the field of manufacturing. In Cognitive Robotics (Vol. 2, pp. 222–233). 
     URL: https://doi.org/10.1016/j.cogr.2022.10.001


337. Mangalampalli, S., Karri, G. R., & Kumar, M. (2022). Multi objective task scheduling algorithm in cloud computing using grey wolf optimization. In Cluster Computing. 
     URL: https://doi.org/10.1007/s10586-022-03786-x


338. Singh, M. P., Arora, K. S., Gupta, A., Kumar, R., Shukla, D. K., & Jhunjhunwala, P. (2022). Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs. In Welding in the World. 
     URL: https://doi.org/10.1007/s40194-022-01391-5


339. Srinivas, T., & Kumar, R. (2022). STUDY OF SOLAR THERMAL POWER PLANT WITH NANOFLUID. In Nanotechnology Applications in Green Energy Systems (pp. 261–274). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140555173&partnerID=40&md5=dbadf40b7fee2ea778a2d8d0baf11b9b


340. Tyagi, P. K., Kumar, K., Kumar, R., & Tangellapalli, S. (2022). AN UPDATED REVIEW ON THE PERFORMANCE ENHANCEMENT OF NANOFLUID-BASED PHOTOVOLTAIC THERMAL SYSTEMS. In Nanotechnology Applications in Green Energy Systems (pp. 69–90). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140546822&partnerID=40&md5=25776d7dbec894c269423acca3a3fa44


341. Srinivas, T., & Kumar, R. (2022). PREFACE. In Nanotechnology Applications in Green Energy Systems (pp. ix–x). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85140505585&partnerID=40&md5=2cb518d27db070ab2f5ded75a752c968


342. Chakraborty, A., Kumar, M., Chaurasia, N., & Gill, S. S. (2022). Journey from cloud of things to fog of things: Survey, new trends, and research directions. In Software - Practice and Experience. 
     URL: https://doi.org/10.1002/spe.3157


343. Kumar, S., Kumar, S., & Veer, K. (2022). Pulse (Nadi) Analysis for Disease Diagnosis: A Detailed Review. In Proceedings of the National Academy of Sciences India Section A - Physical Sciences. 
     URL: https://doi.org/10.1007/s40010-022-00800-0


344. Javaid, M., Haleem, A., Khan, I. H., Singh, R. P., Suman, R., & Mohan, S. (2022). Significant Features and Applications of Drones for Healthcare: An Overview. In Journal of Industrial Integration and Management. 
     URL: https://doi.org/10.1142/S2424862222500245


345. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Ul Haq, M. I., & Raina, A. (2022). Internet of Things in the global healthcare sector: Significance, applications, and barriers. In International Journal of Intelligent Networks (Vol. 3, pp. 165–175). 
     URL: https://doi.org/10.1016/j.ijin.2022.10.002


346. Kaur, R., & Singh, J. (2022). Perceived determinants for modifying littering behavior – a study testing the influence of perceived behavioral control, environmental factors and intention. In Social Responsibility Journal. 
     URL: https://doi.org/10.1108/SRJ-09-2021-0385


347. Basrani, J. I. T. E. N. D. R. A., Kumar, M. A. N. O. J., & Kumar, P. R. A. M. O. D. (2022). An Experimental Study of Static and Dynamic Behavior of the Hybrid Composite. In Journal of Natural Fibers (Vol. 19, Issue 17, pp. 15475–15487). 
     URL: https://doi.org/10.1080/15440478.2022.2128146


348. Dagar, R., Yadav, S., Kinha, M., Mehra, B. S., Rawat, R., Singh, K., & Rana, D. S. (2022). Terahertz Signature of Magnetoelectric Coupling in Multiferroic Polycrystalline Co4Nb2O9 (Vols. 2022-August). 
     URL: https://doi.org/10.1109/IRMMW-THz50927.2022.9895699


349. Behera, G. R., Sikka, M., & Mukhopadhyay, A. (2022). Effect of fabric construction, seam angle, and impact force on the performance of the parachute canopy. In Journal of the Textile Institute. 
     URL: https://doi.org/10.1080/00405000.2022.2131360


350. Mir, A. A., Mushtaq, J., Dar, A. Q., & Patel, M. (2022). A quantitative investigation of methane gas and solid waste management in mountainous Srinagar city-A case study. In Journal of Material Cycles and Waste Management. 
     URL: https://doi.org/10.1007/s10163-022-01516-4


351. Saxena, R., Singh, S. P., & Akbar, M. A. (2022). Determination of optimum design parameters of non-linear damped outrigger system for high-rise buildings. In Asian Journal of Civil Engineering. 
     URL: https://doi.org/10.1007/s42107-022-00507-y


352. Bhanot, N., Ahuja, J., Kidwai, H. I., Nayan, A., & Bhatti, R. S. (2022). A sustainable economic revival plan for post-COVID-19 using machine learning approach – a case study in developing economy context. In Benchmarking. 
     URL: https://doi.org/10.1108/BIJ-09-2021-0564


353. Arya, R. K., & Tiwari, A. K. (2022). Recent innovation in clean conversion technologies, carbon capture and utilization, advance treatment for energy, air, water, biomass and soil for green and sustainable development 2021 (ICheEC 2021). In Environmental Science and Pollution Research. 
     URL: https://doi.org/10.1007/s11356-022-23426-6


354. Singh, S. (2022). UTILIZING MICROCAVITY SHAPES FOR DRAG REDUCTION IN MICROCHANNELS. In International Journal of Fluid Mechanics Research (Vol. 49, Issue 2, pp. 49–67). 
     URL: https://doi.org/10.1615/InterJFluidMechRes.2022040448


355. Kumar, K., Bhadauria, S. S., & Singh, A. P. (2022). Effect of Post-coating Heat Treatment on Corrosion and Stress Corrosion Behaviors of NiCr/TiO2-Coated 316L Stainless Steel. In Arabian Journal for Science and Engineering. 
     URL: https://doi.org/10.1007/s13369-022-07310-6


356. Pati, S., Kumar Sharma, T., Kumar Goyal, K., & Prakash Verma, O. (2022). Renewable integration and energy reduction in multiple stage evaporator. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.09.568


357. Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022). Enhancing smart farming through the applications of Agriculture 4.0 technologies. In International Journal of Intelligent Networks (Vol. 3, pp. 150–164). 
     URL: https://doi.org/10.1016/j.ijin.2022.09.004


358. Walia, R. S., Singh, R. P., Butola, R., & Tyagi, M. (2022). Wear behaviour on a Pin-on-Disc setup for thermal spray of coating using ABAQUS: study and computational analysis. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2126926


359. Shashwat, Singh, A. K., Misra, R., Wadhwa, G., Nirosha, R., & Agarwal, R. (2022). Design and Performance Analysis of Partially Depleted and Fully Depleted Silicon on Insulator MOSFET (Vol. 2335, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2335/1/012042


360. Singh, R., & Patel, M. (2022). Strength and durability performance of rice straw ash-based concrete: an approach for the valorization of agriculture waste. In International Journal of Environmental Science and Technology. 
     URL: https://doi.org/10.1007/s13762-022-04554-5


361. Sharma, K., & Kumar, A. (2022). Performance evaluation of lime–cement–copper slag–rice husk ash composite as a pavement construction material. In International Journal of Pavement Engineering. 
     URL: https://doi.org/10.1080/10298436.2022.2121833


362. Shahid, S. (2022). Review on Biogeotechnics for Soil Treatment. 
     URL: https://doi.org/10.11159/icgre22.142


363. Jana, M. M., Jana, A. K., Jindal, R., Gupta, D., Kumar, V., & Saruchi. (2022). Applications of nanocrystals for antimicrobials. In Industrial Applications of Nanocrystals (pp. 367–399). 
     URL: https://doi.org/10.1016/B978-0-12-824024-3.00011-7


364. Singh, A., Sahu, D., & Prakash Verma, O. (2022). Study on performance of working model of heat exchangers. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.09.373


365. Hernández-Verón, M. A., Yadav, N., Martínez, E., & Singh, S. (2022). Kurchatov-type methods for non-differentiable Hammerstein-type integral equations. In Numerical Algorithms. 
     URL: https://doi.org/10.1007/s11075-022-01406-8


366. Ojha, K., & Garg, R. K. (2022). Surface Modification for EN-19 steel in Powder Mixed Electrical Discharge Machining Process due to Complex Material Transfer Phenomena. In Journal of Engineering Science and Technology Review (Vol. 15, Issue 4, pp. 183–189). 
     URL: https://doi.org/10.25103/jestr.154.25


367. Kumar, R., Gautam, N., Yadav, S., Thulasiraman, V., Yadav, A., & Awol, N. (2022). Moth Bean, Gelatin, and Murraya Koenigii Leaves Extract-Based Film and Coating: Effect of Coating on Shelf and Quality of Solanum Melongena. In Journal of Food Quality (Vol. 2022). 
     URL: https://doi.org/10.1155/2022/8606104


368. Singh, M., Chaudhary, T., & Raj, B. (2022). Design and Simulation Analysis of Silicon Germanium Nanowire FET for Low Power Applications. In Silicon. 
     URL: https://doi.org/10.1007/s12633-022-02101-y


369. Mohanty, A., Shilpa, & Meena, S. S. (2022). Microbial adaptation to extreme temperatures: an overview of molecular mechanisms to industrial application. In Extremozymes and their Industrial Applications (pp. 115–139). 
     URL: https://doi.org/10.1016/B978-0-323-90274-8.00009-5


370. Kumar, N., Ukey, P. D., Francis, V., Singh, R. P., & Sahu, S. (2022). Plastic pellets. In Polymers for 3D Printing: Methods, Properties, and Characteristics (pp. 307–323). 
     URL: https://doi.org/10.1016/B978-0-12-818311-3.00019-7


371. Kumar, P., & Sandhu, S. S. (2022). An experimental investigation into the combustion stability and emissions of an n-butanol/diesel blended fueled partially premixed compression ignition (PPCI) engine. In International Journal of Engine Research. 
     URL: https://doi.org/10.1177/14680874221120141


372. Sahoo, B. P. S., Narang, S., Jain, P., Kumar, D., & Vankayala, S. K. (2022). Mobility-aware Hybrid Channel Estimation Scheme for RIS-aided Millimeter-Wave Systems. 
     URL: https://doi.org/10.1109/CONECCT55679.2022.9865721


373. Kad, P., & Singh, A. (2022). Coupled effect of spatio-temporal variation of Laguerre–Gaussian laser pulse on electron acceleration in magneto-plasma. In Waves in Random and Complex Media. 
     URL: https://doi.org/10.1080/17455030.2022.2121011


374. Modak, S., Daasari, S., Shome, P. P., & Khan, T. (2022). Switchable/Tunable Band-Notched Characteristics in UWB and UWB-MIMO Antennas: A Comprehensive Review. In Wireless Personal Communications. 
     URL: https://doi.org/10.1007/s11277-022-10036-1


375. Rani, M., Choudhary, S., Keshu, & Shanker, U. (2022). Bioremediation of pesticides from water and wastewater. In Pesticides Remediation Technologies from Water and Wastewater (pp. 313–338). 
     URL: https://doi.org/10.1016/B978-0-323-90893-1.00015-5


376. Javaid, M., Haleem, A., Pratap Singh, R., Suman, R., & Rab, S. (2022). Significance of machine learning in healthcare: Features, pillars and applications. In International Journal of Intelligent Networks (Vol. 3, pp. 58–73). 
     URL: https://doi.org/10.1016/j.ijin.2022.05.002


377. Babu, N. S., Ansari, A. Q., Gangwar, D., Kanaujia, B. K., Kumar, S., & Gupta, S. K. (2022). Dual-Band Circularly-Polarized EBG-Based Antenna for Wi-MAX/WLAN/ISM Band Applications. In Wireless Personal Communications. 
     URL: https://doi.org/10.1007/s11277-022-09951-0


378. Singh, A. K., Nayak, A., Kumar, N., Singh, R. P., & Jain, P. K. (2022). Fabrication of personalized lithophane via additive manufacturing. In Sustainable Operations and Computers (Vol. 3, pp. 17–21). 
     URL: https://doi.org/10.1016/j.susoc.2021.09.001


379. Bala, P., Kumar, V., & Mehra, R. (2022). Radon in Building Materials. In The Fundamentals of Building Materials (pp. 35–54). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137943784&partnerID=40&md5=c3c346c102bc248b74f16b27f26c27ae


380. Aggarwal, A., & Sah, M. K. (2022). Eggshell membrane in skin tissue engineering and wound healing. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. 417–435). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00007-9


381. Sah, M. K., Kasoju, N., & Mano, J. F. (2022). Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. 1–469). 
     URL: https://doi.org/10.1016/C2020-0-03524-3


382. Sah, M. K., Kasoju, N., & Mano, J. F. (2022). Preface. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. xxv–xxv). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00012-2


383. Sah, M. K., Kasoju, N., & Mano, J. F. (2022). Innovative approaches and future perspectives of natural polymers in wound healing and repair. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. 449–459). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00015-8


384. Sikka, M., & Garg, S. (2022). Natural antimicrobial and bioactive agents as additives in wound dressings. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. 225–241). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00018-3


385. Sah, M. K., Kasoju, N., & Mano, J. F. (2022). Introduction. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. xxvii–xxvii). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00010-9


386. Rani, M., Meenu, Choudhary, S., & Shanker, U. (2022). Removal pesticides by advanced techniques based on nanomaterials. In Pesticides in the Natural Environment: Sources, Health Risks, and Remediation (pp. 437–482). 
     URL: https://doi.org/10.1016/B978-0-323-90489-6.00018-5


387. Minhas, N., Sudheer, L., Sharma, V., & Bhadauria, S. S. (2022). Evaluating the corrosion behaviour of AA6061-T6 alloy and its friction stir welded joints. In Canadian Metallurgical Quarterly. 
     URL: https://doi.org/10.1080/00084433.2022.2120415


388. Shukla, P. K., & Sathiya, S. (2022). Early Detection of Potato Leaf Diseases using Convolutional Neural Network with Web Application (pp. 277–282). 
     URL: https://doi.org/10.1109/AIC55036.2022.9848975


389. Audichya, P., Gupta, D., & Singh, A. (2022). Generative Adversarial Networks: Models and Techniques - A Review (pp. 870–876). 
     URL: https://doi.org/10.1109/AIC55036.2022.9848870


390. Chauhan, D., & Yadav, A. (2022). A Hybrid of Artificial Electric Field Algorithm and Differential Evolution for Continuous Optimization Problems. In Lecture Notes on Data Engineering and Communications Technologies (Vol. 140, pp. 507–520). 
     URL: https://doi.org/10.1007/978-981-19-2948-9_49


391. Kim, J. H., Deep, K., Geem, Z. W., Sadollah, A., & Yadav, A. (2022). Preface. In Lecture Notes on Data Engineering and Communications Technologies (Vol. 140, p. v). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137596268&partnerID=40&md5=e7957467ca242485b44347aa6f017946


392. Sonwani, E., Bansal, U., Alroobaea, R., Baqasah, A. M., & Hedabou, M. (2022). An Artificial Intelligence Approach Toward Food Spoilage Detection and Analysis. Frontiers in Public Health, 9. 
     URL: https://doi.org/10.3389/fpubh.2021.816226


393. Fattahi, N., Hekmatdoust Tabrizi, B., Sadeghi, Z., Rani, S., Dehghanian, Z., Asgari Lajayer, B., & van Hullebusch, E. D. (2022). Toxicity of nanoparticles onto plants: Overview of the biochemical and molecular mechanisms. In Toxicity of Nanoparticles in Plants: An Evaluation of Cyto/Morpho-physiological, Biochemical and Molecular Responses (pp. 69–94). 
     URL: https://doi.org/10.1016/B978-0-323-90774-3.00002-7


394. Kumar, N., Tyagi, M., & Sachdeva, A. (2022). A sustainable framework development and assessment for enhancing the environmental performance of cold supply chain. In Management of Environmental Quality: An International Journal. 
     URL: https://doi.org/10.1108/MEQ-03-2022-0046


395. Rani, M., Meenu, & Shanker, U. (2022). Efficient cleanup of emerging contaminants by green biosynthesized Z-scheme-type Bi2O3@CdS nanocomposite with improved photoactivity. In Nanotechnology for Environmental Engineering. 
     URL: https://doi.org/10.1007/s41204-022-00283-9


396. Haleem, A., Javaid, M., Asim Qadri, M., Pratap Singh, R., & Suman, R. (2022). Artificial intelligence (AI) applications for marketing: A literature-based study. In International Journal of Intelligent Networks (Vol. 3, pp. 119–132). 
     URL: https://doi.org/10.1016/j.ijin.2022.08.005


397. Prashar, A., & Sood, N. (2022). Performance Analysis of MIMO-NOMA and SISO-NOMA in Downlink Communication Systems. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9848114


398. Shivali, & Khosla, M. (2022). Coverage of Meta-Stability Using Formal Verification in Asynchronous Gray Code FIFO. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9848195


399. Agarwal, E., & Kakkar, D. (2022). Connectivity Improvement in Cluster-Based VANET. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9848190


400. Shukla, P., Khosla, M., Sood, N., & Chawla, T. (2022). Design and Comparison Analysis of Ge-source Hetero-stacked L-shape TFET with Homo-stacked L-shape TFET. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9847778


401. Singh, S. K., Sharma, K. P., & Kumar, P. (2022). Analytical study for Price Prediction of Bitcoin using Machine Learning and Deep Learning. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9848077


402. Ansari, F., Chaudhary, T., Sunkaria, R. K., & Singh, M. (2022). Effect of Various Parameter Variation on Analog/RF Performance of SiGe based Nanowire TFET. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9847740


403. Kumar, R., & Singla, R. (2022). Attention guided EEG based Game Genre Classification. 
     URL: https://doi.org/10.1109/CONIT55038.2022.9847911


404. Choudhary, D., & Pahuja, R. (2022). Improvement in Quality of Service Against Doppelganger Attacks for Connected Network. In International Journal of Interactive Multimedia and Artificial Intelligence (Vol. 7, Issue 5, pp. 51–58). 
     URL: https://doi.org/10.9781/ijimai.2022.08.003


405. Sharma, A., Basumatary, N., Singh, P., Kapoor, K., & Singh, S. P. (2022). Potential of geopolymer concrete as substitution for conventional concrete: A review. In Materials Today: Proceedings (Vol. 57, pp. 1539–1545). 
     URL: https://doi.org/10.1016/j.matpr.2021.12.159


406. Srinivas, T., & Kumar, R. (2022). NANOTECHNOLOGY APPLICATIONS IN GREEN ENERGY SYSTEMS. In Nanotechnology Applications in Green Energy Systems (pp. 1–286). 
     URL: https://doi.org/10.52305/PKVG8533


407. Kotteda, T. K., Kumar, M., Kumar, P., & Chekuri, R. B. R. (2022). Metal matrix nanocomposites: future scope in the fabrication and machining techniques. In International Journal of Advanced Manufacturing Technology. 
     URL: https://doi.org/10.1007/s00170-022-09847-0


408. Kushagre, K., Verma, S., Singh, D., & Mishra, G. (2022). Detection of Cancer using Contrast Stretching (pp. 362–366). 
     URL: https://doi.org/10.1109/ICIEM54221.2022.9853194


409. Sakshi, S., Verma, S., Chaturvedi, P., & Yadav, S. A. (2022). Least Significant Bit Steganography for Text and Image hiding (pp. 415–421). 
     URL: https://doi.org/10.1109/ICIEM54221.2022.9853052


410. Singh, R., Verma, S., Yadav, S. A., & Vikram Singh, S. (2022). Copy-move Forgery Detection using SIFT and DWT detection Techniques (pp. 338–343). 
     URL: https://doi.org/10.1109/ICIEM54221.2022.9853192


411. Ansari, M. S. A., Pal, K., Govil, P., Govil, M. C., & Awasthi, L. K. (2022). A statistical analysis of SAMPARK dataset for peer-to-peer traffic and selfish-peer identification. In Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-13556-x


412. Pynadath, R. D., Verma, S., Sharma, S., & Kaur, G. (2022). Drowsiness Detection Based on Image Processing with Video Compression (pp. 390–395). 
     URL: https://doi.org/10.1109/ICIEM54221.2022.9853062


413. Bhavani, A., Verma, S., Singh, S. V, & Avdhesh Yadav, S. (2022). Smart Traffic Light System Time Prediction Using Binary Images (pp. 367–372). 
     URL: https://doi.org/10.1109/ICIEM54221.2022.9853071


414. Rani, R., Kumar, T., & Sah, M. P. (2022). A Review on Deepfake Media Detection (Vol. 461, pp. 343–356). 
     URL: https://doi.org/10.1007/978-981-19-2130-8_28


415. Singh, G., Abrol, A., Kumar, S., Kumar Kanaujia, B., & Kumar Pandey, V. (2022). A miniaturized tri-band antenna loaded with D-shaped meta-structures. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.08.037


416. Shekar Kuppili, Y., Kumar, P., & Singh Sandhu, S. (2022). A critical review of the impacts of split injection strategies on the performance, combustion and emissions characteristics of a diesel engine fueled with low carbon alcohol fuels. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.08.020


417. Singh, G., Abrol, A., Kumar, S., Kanaujia, B. K., & Pandey, V. K. (2022). A compact dual-band antenna with an elliptical-shaped meta-resonator array. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.08.039


418. Mukherjee, S., Sah, M. K., Krishnan, A., Athira, R. K., & Kasoju, N. (2022). Silk fibroin and silk sericin in skin tissue engineering and wound healing: retrospect and prospects. In Natural Polymers in Wound Healing and Repair: From Basic Concepts to Emerging Trends (pp. 301–331). 
     URL: https://doi.org/10.1016/B978-0-323-90514-5.00005-5


419. Gupta, A., & Singh, A. (2022). An optimal multi-disease prediction framework using hybrid machine learning techniques. In Kuwait Journal of Science (Vol. 49). 
     URL: https://doi.org/10.48129/kjs.splml.19321


420. Bajpai, S., & Srivastava, V. C. (2022). Environmental issues for sustainable development. In Environmental Science and Pollution Research. 
     URL: https://doi.org/10.1007/s11356-022-22681-x


421. Kumar, S., & Sikander, A. (2022). A modified probabilistic roadmap algorithm for efficient mobile robot path planning. In Engineering Optimization. 
     URL: https://doi.org/10.1080/0305215X.2022.2104840


422. Arora, Z., Markad, D., Khullar, S., Mondal, S., & Mandal, S. K. (2022). Enhanced Catalytic Activity of a Cd(II) Complex Containing an Unsymmetrical Primary Amide Functionalized Ligand for the Solvent-Free Cyanosilylation Reaction. In Catalysis Letters. 
     URL: https://doi.org/10.1007/s10562-022-04116-x


423. Chauhan, S., Trehan, R., & Singh, R. P. (2022). Experimental investigation into face milling of Inconel X750 super alloy: a study on cutting force and surface topography. In World Journal of Engineering. 
     URL: https://doi.org/10.1108/WJE-06-2022-0252


424. Samriya, J. K., Kumar, M., & Tiwari, R. (2022). Energy-aware ACO-DNN optimization model for intrusion detection of unmanned aerial vehicle (UAVs). In Journal of Ambient Intelligence and Humanized Computing. 
     URL: https://doi.org/10.1007/s12652-022-04362-2


425. Minhas, N., Sharma, V., & Bhadauria, S. S. (2022). A review on weldability and corrosion behaviour of L-PBF printed AlSi10Mg alloy. In Canadian Metallurgical Quarterly. 
     URL: https://doi.org/10.1080/00084433.2022.2111968


426. Chatterjee, A., Singh, H., & Chaudhary, K. (2022). Nonwoven viscose fabric-polyvinyl alcohol based flexible composite. In Journal of Vinyl and Additive Technology. 
     URL: https://doi.org/10.1002/vnl.21941


427. Raghavendra, K., & Kakkar, D. (2022). Reliability of 5G in human health monitoring using blockchain technology. In Blockchain Applications for Healthcare Informatics: beyond 5G (pp. 313–326). 
     URL: https://doi.org/10.1016/B978-0-323-90615-9.00012-8


428. Kumar, R., Thakur, A. K., Banerjee, N., Kumar, A., Gaurav, G. K., & Arya, R. K. (2023). Liquid antisolvent crystallization of pharmaceutical compounds: current status and future perspectives. In Drug Delivery and Translational Research (Vol. 13, Issue 2, pp. 400–418). 
     URL: https://doi.org/10.1007/s13346-022-01219-1


429. Kumar, M., & Singh, A. (2022). Probabilistic data structures in smart city: Survey, applications, challenges, and research directions. In Journal of Ambient Intelligence and Smart Environments (Vol. 14, Issue 4, pp. 229–284). 
     URL: https://doi.org/10.3233/AIS-220101


430. Kumar, R. (2022). A critical re-examination of Reynolds analogy for micro-convective flow. In Journal of Thermal Engineering (Vol. 8, Issue 4, pp. 515–528). 
     URL: https://doi.org/10.18186/thermal.1149694


431. Brahma, S. R., Singh, S., Gupta, D. K., & Malik, A. (2022). A reversible data hiding technique using lower magnitude error channel pair selection. In Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-13554-z


432. Sah, M. P., & Singh, A. (2022). Aggregation Techniques in Federated Learning: Comprehensive Survey, Challenges and Opportunities (pp. 1962–1967). 
     URL: https://doi.org/10.1109/ICACITE53722.2022.9823702


433. Pandit, W. H., Sharma, K. P., & Sharma, N. (2022). International Roughness Index (IRI) prediction using various machine learning techniques on Flexible Pavements (pp. 1899–1905). 
     URL: https://doi.org/10.1109/ICACITE53722.2022.9823847


434. Sharma, A., & Sunkaria, R. K. (2022). Convolution Neural Network based Image Denoising: A Review (pp. 2094–2097). 
     URL: https://doi.org/10.1109/ICACITE53722.2022.9823935


435. Konar, A., & Sunkaria, R. K. (2022). A Review on Face Mask Detection Techniques for COVID-19 prevention (pp. 2145–2150). 
     URL: https://doi.org/10.1109/ICACITE53722.2022.9823886


436. Dagar, E. S. S., & Sunkaria, R. K. (2022). Analysis of Respiratory Signals in Spectral Domain for Detecting Respiratory Disorders with Emphasis on COVID-19 (pp. 2088–2093). 
     URL: https://doi.org/10.1109/ICACITE53722.2022.9823571


437. Chand, R., Sharma, V. S., Trehan, R., Verma, R., Gupta, M. K., & Srivastava, S. (2022). Developing Superhydrophobic Surface Using Multi Jet 3D Printing Durability Analysis. In Journal of Materials Engineering and Performance. 
     URL: https://doi.org/10.1007/s11665-022-07154-z


438. Sachdeva, A., Kumar, P., Yadav, O. P., & Tyagi, M. (2022). Preface (pp. v–vi). 
     URL: https://doi.org/10.1016/B978-1-85573-067-0.50111-2


439. Chauhan, S., Pabla, B. S., Singh, R. P., Singh, R., & Singh, T. (2022). Study on surface integrity in turning of titanium using cryogenically treated CBN inserts. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2106665


440. Dubey, A. K., Sachdeva, A., & Mehta, M. (2022). Preface (pp. v–vi). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85135158027&partnerID=40&md5=220fa49d679850b18e85c45d22bce5c2


441. Dvivedi, A., Sachdeva, A., Sindhwani, R., & Sahu, R. (2022). Preface (pp. v–vi). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85135138143&partnerID=40&md5=e2ad035466dac2f2d3a36548ddad6660


442. Sharma, N., Mangla, M., & Mohanty, S. N. (2022). A Markov decision process-based secure consensus framework for leveraging blockchain technology in IoT applications. In International Journal of Electronic Business (Vol. 17, Issue 3, pp. 270–282). 
     URL: https://doi.org/10.1504/IJEB.2022.124329


443. Sharma, T. K., & Verma, O. P. (2022). Application of DBOA in Pulp and Paper Process Optimization. In SpringerBriefs in Applied Sciences and Technology (pp. 67–83). 
     URL: https://doi.org/10.1007/978-981-19-3767-5_4


444. Sharma, T. K., & Verma, O. P. (2022). Preface. In SpringerBriefs in Applied Sciences and Technology (pp. v–vi). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85135085340&partnerID=40&md5=2b4cb823ad87cf21fed60ca6eab56b81


445. Sharma, T. K., & Verma, O. P. (2022). Differential Butterfly Optimization Algorithm—A Hybrid Variant. In SpringerBriefs in Applied Sciences and Technology (pp. 9–16). 
     URL: https://doi.org/10.1007/978-981-19-3767-5_2


446. Roy, A., & Pahuja, R. (2022). Detection and Classification of Bird Pest Using Spectrogram, Physical Imagery, and Convolutional Neural Network (Vol. 446, pp. 47–63). 
     URL: https://doi.org/10.1007/978-981-19-1559-8_6


447. Sharma, T. K., & Verma, O. P. (2022). Application of DBOA in Structural Engineering Design Problems. In SpringerBriefs in Applied Sciences and Technology (pp. 17–66). 
     URL: https://doi.org/10.1007/978-981-19-3767-5_3


448. Sharma, T. K., & Verma, O. P. (2022). Conclusion and Future Directions. In SpringerBriefs in Applied Sciences and Technology (pp. 85–86). 
     URL: https://doi.org/10.1007/978-981-19-3767-5_5


449. Sharma, T. K., & Verma, O. P. (2022). Butterfly Optimization Algorithm. In SpringerBriefs in Applied Sciences and Technology (pp. 1–7). 
     URL: https://doi.org/10.1007/978-981-19-3767-5_1


450. Sharma, J., Tyagi, M., Panchal, D., & Singh, R. P. (2022). Contemplation of food industry attributes confronted in smooth adoption of Lean Six Sigma practices. In International Journal of Six Sigma and Competitive Advantage (Vol. 14, Issue 1, pp. 32–69). 
     URL: https://doi.org/10.1504/IJSSCA.2022.124294


451. Kumar, N., Tyagi, M., & Sachdeva, A. (2022). Estimation of best possible solutions for environmental trade-offs in cold supply chain using BWM based ELECTRE-I approach. In International Journal of Six Sigma and Competitive Advantage (Vol. 14, Issue 1, pp. 152–169). 
     URL: https://doi.org/10.1504/IJSSCA.2022.124296


452. Kumar, R., Ahn, C. W., Sharma, T. K., Verma, O. P., & Agarwal, A. (2022). Preface (Vol. 425, pp. v–vi). 
     URL: https://doi.org/10.1515/9783110469608-001


453. Ratan, J. K., Sahu, D., Pandhare, N. N., & Bhavanam, A. (2022). Preface (pp. vii–viii). 
     URL: https://doi.org/10.1016/j.piutam.2015.04.001


454. Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Gonzalez, E. S. (2022). Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability. In Sustainable Operations and Computers (Vol. 3, pp. 203–217). 
     URL: https://doi.org/10.1016/j.susoc.2022.01.008


455. Chanda, C. K., Szymanski, J. R., Sikander, A., Mondal, P. K., & Acharjee, D. (2022). Preface (Vol. 820, p. v). 
     URL: https://doi.org/10.1515/9781400830008-001


456. Xie, Q., Zhao, L., Li, K., Yadav, A., & Wang, L. (2022). Preface. In Lecture Notes on Data Engineering and Communications Technologies (Vol. 89, pp. v–vi). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122360593&partnerID=40&md5=0c36c2229129ed1246ef9a865eadf3e1


457. Prabhakar, M. R., Mohanty, A., & Meena, S. S. (2022). In silico screening of effective inhibitor of 5α-reductase type 1 for androgenic alopecia treatment. In Natural Product Research (Vol. 36, Issue 22, pp. 5852–5857). 
     URL: https://doi.org/10.1080/14786419.2021.2019728


458. Singh, A., Nawayseh, N., Singh, H., Samuel, S., Prakash, C., Singh, R., Kumar, Y., Singh, M., & Chhuneja, N. K. (2022). Modelling and optimization of tractor ride conditions under water tanker operation. In Theoretical Issues in Ergonomics Science (Vol. 23, Issue 4, pp. 453–474). 
     URL: https://doi.org/10.1080/1463922X.2021.1981481


459. Verma, S., Midha, V. K., & Choudhary, A. K. (2022). Runoff erosion control performance of structurally modified coir geomeshes on different soil type and slope angle. In Journal of Natural Fibers (Vol. 19, Issue 13, pp. 6921–6933). 
     URL: https://doi.org/10.1080/15440478.2021.1941481


460. Bhatia, D., & Sinha, S. K. (2022). Selection of Handloom Fabrics Based on Thermo-Physiological Characteristics Using Multi - Attributes Decision Making Algorithm. In Journal of Natural Fibers (Vol. 19, Issue 13, pp. 6015–6030). 
     URL: https://doi.org/10.1080/15440478.2021.1904475


461. Roy, M. D., Ghosh, S., & Sivasamy, S. (2022). Study on the Frictional Behavior of Cotton Spun Yarn (Unraveled from Fabrics) after Different Wet Processing Stages. In Journal of Natural Fibers (Vol. 19, Issue 13, pp. 5008–5018). 
     URL: https://doi.org/10.1080/15440478.2021.1875349


462. Singh, T., Tiwari, S. K., & Shukla, D. K. (2022). Novel method of nanoparticle addition for friction stir welding of aluminium alloy. In Advances in Materials and Processing Technologies (Vol. 8, Issue 1, pp. 1160–1172). 
     URL: https://doi.org/10.1080/2374068X.2020.1855397


463. Joshi, S., & Midha, V. K. (2022). CA-Chitosan effect on the time dependent serviceability of jute geotextile under unpaved roads. In Journal of Natural Fibers (Vol. 19, Issue 9, pp. 3475–3484). 
     URL: https://doi.org/10.1080/15440478.2020.1848705


464. Verma, S., Midha, V. K., & Choudhary, A. K. (2022). Optimization of Parameters for Alkali Pretreatment on Coir Fiber for Biomass Production Using TOPSIS. In Journal of Natural Fibers (Vol. 19, Issue 8, pp. 3038–3050). 
     URL: https://doi.org/10.1080/15440478.2020.1838994


465. Vasistha, V., & Bharj, R. S. (2022). Analyzing the storage stability of diesel emulsified fuels: a comparative standpoint. In Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Vol. 44, Issue 2, pp. 5527–5544). 
     URL: https://doi.org/10.1080/15567036.2020.1839602


466. Kumar, R., Kumar, S., & Sengupta, A. (2022). Optimization of Bio-Impedance Techniques-Based Monitoring System for Medical & Industrial Applications. In IETE Journal of Research (Vol. 68, Issue 5, pp. 3843–3854). 
     URL: https://doi.org/10.1080/03772063.2020.1780957


467. Karande, V., Mohire, P., Deshmukh, S., Patravale, A., Desai, V., Chandam, D., Sankpal, S., & Deshmukh, M. (2022). Green and highly efficient synthesis of pyrimidine derivatives in a novel glycolic acid: urea-based low transition temperature mixture via C–C and C–O bond formation. In Journal of Heterocyclic Chemistry. 
     URL: https://doi.org/10.1002/jhet.4547


468. Agrawal, H. P., Bansal, H. O., Kumar, R., & Sisodia, Y. S. (2022). Design and real-time validation of PI and Fuzzy Logic tuned photovoltaic integrated DSTATCOM to improve power quality. In Environmental Science and Pollution Research. 
     URL: https://doi.org/10.1007/s11356-022-21910-7


469. Pandit, P., Saini, A., Chidambaram, S., Kumar, V., Panda, B., Ramanathan, A. L., Sahu, N., Singh, A. K., & Mehra, R. (2022). Author Correction: Tracing geochemical sources and health risk assessment of uranium in groundwater of arid zone of India (Scientific Reports, (2022), 12, 1, (2286), 10.1038/s41598-022-05770-2). In Scientific Reports (Vol. 12, Issue 1). 
     URL: https://doi.org/10.1038/s41598-022-17005-5


470. Shilpa, Basak, N., & Meena, S. S. (2022). Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective. In Frontiers of Environmental Science and Engineering (Vol. 16, Issue 12). 
     URL: https://doi.org/10.1007/s11783-022-1596-6


471. Thakur, A., Ojha, A., Bhadauria, S. S., & Sharma, V. (2022). Influence of forging action on the microstructural and mechanical characteristics of the friction stir welded joints of aluminum alloy with varied joint configurations. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 
     URL: https://doi.org/10.1177/09544062221111904


472. Dong, B., Liu, Y., Mu, W., Jiang, Z., Pandey, P., Hong, T., Olesen, B., Lawrence, T., O’Neil, Z., Andrews, C., Azar, E., Bandurski, K., Bardhan, R., Bavaresco, M., Berger, C., Burry, J., Carlucci, S., Chvatal, K., De Simone, M., … Zhou, X. (2022). A Global Building Occupant Behavior Database. In Scientific Data (Vol. 9, Issue 1). 
     URL: https://doi.org/10.1038/s41597-022-01475-3


473. Kumar, P., & Raj, B. (2022). Performance Assessment and Optimization of Vertical Nanowire TFET for Biosensor Application. In Transactions on Electrical and Electronic Materials. 
     URL: https://doi.org/10.1007/s42341-022-00405-9


474. Kumar, N., Tyagi, M., Sachdeva, A., Kazancoglu, Y., & Ram, M. (2022). Impact analysis of COVID-19 outbreak on cold supply chains of perishable products using a SWARA based MULTIMOORA approach. In Operations Management Research. 
     URL: https://doi.org/10.1007/s12063-022-00289-1


475. Javaid, M., Haleem, A., Singh, R. P., Suman, R., Hussain, B., & Rab, S. (2022). Extensive Capabilities of Additive Manufacturing and Its Metrological Aspects. In Mapan - Journal of Metrology Society of India. 
     URL: https://doi.org/10.1007/s12647-022-00568-z


476. Gupta, A., & Singh, A. (2022). An Intelligent Healthcare Cyber Physical Framework for Encephalitis Diagnosis Based on Information Fusion and Soft-Computing Techniques. In New Generation Computing. 
     URL: https://doi.org/10.1007/s00354-022-00175-1


477. Pandit, P., Saini, A., Chidhambaram, S., Kumar, V., Panda, B., Ramanathan, A. L., Sahu, N., Singh, A. K., & Mehra, R. (2022). Tracing geochemical sources and health risk assessment of uranium in groundwater of arid zone of India. In Scientific Reports (Vol. 12, Issue 1). 
     URL: https://doi.org/10.1038/s41598-022-05770-2


478. Singh, J., Arora, K. S., Shukla, D. K., & Kumar, H. (2022). Mechanical and microstructural characterization of cold metal transfer (CMT) spot aluminium-steel weld-brazed joints. In Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 
     URL: https://doi.org/10.1177/14644207221097709


479. Raman, A., Chattopadhyay, S. P., Ranjan, R., Kumar, N., Kakkar, D., & Sharma, R. (2022). Design and Investigation of Dual Dielectric Recessed-Gate AlGaN/GaN HEMT as Gas sensor Application. Transactions on Electrical and Electronic Materials. 
     URL: https://doi.org/10.1007/s42341-022-00391-y


480. Kumar, S., Veer, K., & Kumar, S. (2022). A spider tool-based qualitative analysis of machine learning for wrist pulse analysis. Network Modeling Analysis in Health Informatics and Bioinformatics, 11(1). 
     URL: https://doi.org/10.1007/s13721-022-00361-7


481. Sharma, D., Kanaujia, B. K., Kaim, V., Mittra, R., Arya, R. K., & Matekovits, L. (2022). Design and implementation of compact dual-band conformal antenna for leadless cardiac pacemaker system. Scientific Reports, 12(1). 
     URL: https://doi.org/10.1038/s41598-022-06904-2


482. Kumar, R. (2022). COVID-19 outbreak in India: age-wise analysis of patients. Working with Older People. 
     URL: https://doi.org/10.1108/WWOP-05-2020-0022


483. Srivastava, H., & Zafar, M. (2022). Three pieces Riemann problem for 2-D full Euler system in the Noble–Abel gas. In Mathematical Methods in the Applied Sciences. 
     URL: https://doi.org/10.1002/mma.8377


484. Sreekumar, S., Sharma, K. C., Bhakar, R., Simon, S. P., & Rana, A. (2022). Multi interval Zero Carbon Flexible Ramp Product. In Electric Power Systems Research (Vol. 212). 
     URL: https://doi.org/10.1016/j.epsr.2022.108258


485. Priyanka, Srivastava, N., Wadhwa, G., Singh, S., & Raj, B. (2022). Simulation Study of Linearly Graded Binary Metal Alloy Pα Q1-α Gate TFET Device for Realization of Boolean Functions. Silicon. 
     URL: https://doi.org/10.1007/s12633-022-01808-2


486. Gupta, A. K., Raman, A., & Kumar, N. (2022). Design Considerations and Optimization of Electrostatic Doped Ferroelectric Nanotube Tunnel FET: Analog and Noise Analysis. Silicon. 
     URL: https://doi.org/10.1007/s12633-022-01720-9


487. Sethi, S., Saruchi, Medha, Thakur, S., Kaith, B. S., Sharma, N., Ansar, S., Pandey, S., & Kuma, V. (2022). Biopolymer starch-gelatin embedded with silver nanoparticle–based hydrogel composites for antibacterial application. Biomass Conversion and Biorefinery. 
     URL: https://doi.org/10.1007/s13399-022-02437-w


488. Rambabu, D., Sharma, S. K., & Abdul Akbar, M. (2022). A review on suitability of using geopolymer concrete for rigid pavement. In Innovative Infrastructure Solutions (Vol. 7, Issue 5). 
     URL: https://doi.org/10.1007/s41062-022-00878-w


489. Jayachandran, V., Basak, N., De Philippis, R., & Adessi, A. (2022). Novel strategies towards efficient molecular biohydrogen production by dark fermentative mechanism: present progress and future perspective. In Bioprocess and Biosystems Engineering. 
     URL: https://doi.org/10.1007/s00449-022-02738-4


490. Anwar, M. I., & Khosla, A. (2022). Video fog removal using Anisotropic Total Variation de-noising. Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-12318-z


491. Singh, S., & Chaudhary, T. (2022). Performance and Comparative Analysis of Heterojunction Structure Based GAA-NWTFET for Low Power Applications. Silicon. 
     URL: https://doi.org/10.1007/s12633-021-01614-2


492. Rajput, P. J., Bhandari, S. U., & Wadhwa, G. (2022). A Review on—Spintronics an Emerging Technology. Silicon. 
     URL: https://doi.org/10.1007/s12633-021-01643-x


493. Rani, D., Ebrahimnejad, A., & Gupta, G. (2022). Generalized techniques for solving intuitionistic fuzzy multi-objective non-linear optimization problems. In Expert Systems with Applications (Vol. 202). 
     URL: https://doi.org/10.1016/j.eswa.2022.117264


494. Kumar, M., & Bharadwaj, M. R. (2022). Numerical simulation of ballistic impact response on composite materials for different shape of projectiles. In Sadhana - Academy Proceedings in Engineering Sciences (Vol. 47, Issue 3). 
     URL: https://doi.org/10.1007/s12046-022-01889-0


495. Kumar, S., Kapoor, K., Singh, S. P., Singh, P., & Sharma, V. (2022). A review on the properties of natural and recycled coarse aggregates concrete made with different coal ashes. In Cleaner Materials (Vol. 5). 
     URL: https://doi.org/10.1016/j.clema.2022.100109


496. Singh, J., Goyal, K. K., Kumar, R., & Gupta, V. (2022). Influence of process parameters on mechanical strength, build time, and material consumption of 3D printed polylactic acid parts. In Polymer Composites. 
     URL: https://doi.org/10.1002/pc.26849


497. Mitra, A., Kumar, R., Singh, D. K., & Said, Z. (2022). Advances in the improvement of thermal-conductivity of phase change material-based lithium-ion battery thermal management systems: An updated review. In Journal of Energy Storage (Vol. 53). 
     URL: https://doi.org/10.1016/j.est.2022.105195


498. Moza, A., Ram, N. R., Srivastava, N. K., & Nikhil, G. N. (2022). Bioprocessing of low-value food waste to high value volatile fatty acids for applications in energy and materials: A review on process-flow. In Bioresource Technology Reports (Vol. 19). 
     URL: https://doi.org/10.1016/j.biteb.2022.101123


499. Malhotra, R., Saini, B. S., & Gupta, S. (2022). A novel compound-based loss function for glioma segmentation with deep learning. In Optik (Vol. 265). 
     URL: https://doi.org/10.1016/j.ijleo.2022.169443


500. Yadav, D., Pachauri, N., Verma, O. P., Sahu, D., Ratan, J. K., & Sharma, T. K. (2022). Controller design for optimal operation of Multiple Effect Evaporator of paper mills. In Results in Control and Optimization (Vol. 8). 
     URL: https://doi.org/10.1016/j.rico.2022.100137


501. Kumar, S., Shastri, S., Mahajan, S., Singh, K., Gupta, S., Rani, R., Mohan, N., & Mansotra, V. (2022). LiteCovidNet: A lightweight deep neural network model for detection of COVID-19 using X-ray images. In International Journal of Imaging Systems and Technology. 
     URL: https://doi.org/10.1002/ima.22770


502. Akhtar, M., & Khajuria, A. (2022). The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro–Microdeformation, and Polycrystals’ Hardness of Boron Alloyed P91 Steels. In Steel Research International. 
     URL: https://doi.org/10.1002/srin.202100819


503. Laha, B., Khullar, S., Markad, D., & Mandal, S. K. (2022). Room temperature synthesis of new isoreticular 2D metal–organic frameworks of Co(II) and Ni(II) comprised of dual semiflexible neutral and anionic linkers, and their conversion to metal oxide nanomaterials. In Inorganica Chimica Acta (Vol. 539). 
     URL: https://doi.org/10.1016/j.ica.2022.120966


504. Singh, V., Kukreja, R., & Sehgal, S. S. (2022). Condensation heat transfer of R134a and R410A in multiport rectangular microchannels with different aspect ratio. In International Journal of Thermal Sciences (Vol. 179). 
     URL: https://doi.org/10.1016/j.ijthermalsci.2022.107696


505. Rao, R., & Basak, N. (2022). Sequential Dark-Photo Batch Fermentation and Kinetic Modelling for Biohydrogen Production Using Cheese Whey as a Feedstock. In Applied Biochemistry and Biotechnology. 
     URL: https://doi.org/10.1007/s12010-022-03958-w


506. Kumar, H., Kaur, S., Kumar, V., Ghfar, A. A., Katal, A., Sharma, M., Singla, M., & Khyati. (2022). Study of the interactions of monosaccharides D(+)-glucose and D(−)-fructose in aqueous diammonium hydrogen phosphate over the temperature range T=(288.15–318.15) K. In Journal of Chemical Thermodynamics (Vol. 172). 
     URL: https://doi.org/10.1016/j.jct.2022.106793


507. Samriya, J. K., Tiwari, R., Cheng, X., Singh, R. K., Shankar, A., & Kumar, M. (2022). Network intrusion detection using ACO-DNN model with DVFS based energy optimization in cloud framework. In Sustainable Computing: Informatics and Systems (Vol. 35). 
     URL: https://doi.org/10.1016/j.suscom.2022.100746


508. Kumar, P., & Singh Sandhu, S. (2022). An attempt to implement partially premixed combustion strategy in a multi-cylinder CRDI engine: A detailed experimental and wavelet transform analysis. In Fuel (Vol. 323). 
     URL: https://doi.org/10.1016/j.fuel.2022.124372


509. Ahmad, A., & Singh, J. (2022). Smoking Cessation Interventions across Different Stages of Change. In Journal of Applied Social Science. 
     URL: https://doi.org/10.1177/19367244221080968


510. Shaik, V. B., & Tangellapalli, S. (2022). Design and simulation of water-cooled dehumidifier for HDH desalination plant. Heat Transfer. 
     URL: https://doi.org/10.1002/htj.22558


511. Kumar, S., Kumar, A., Chander, N., & Singh, D. K. (2022). Thermal performance analysis of a novel direct absorption solar collector augmented solar still using silver nanofluids. Environmental Progress and Sustainable Energy. 
     URL: https://doi.org/10.1002/ep.13858


512. Kumar, R., Singh, D. K., & Chander, S. (2022). A critical review on the effect of nanorefrigerant and nanolubricant on the performance of heat transfer cycles. Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 
     URL: https://doi.org/10.1007/s00231-022-03194-2


513. Arif, M., Kango, S., & Shukla, D. K. (2022). Analysis of textured journal bearing with slip boundary condition and pseudoplastic lubricants. In International Journal of Mechanical Sciences (Vol. 228). 
     URL: https://doi.org/10.1016/j.ijmecsci.2022.107458


514. Khushbu, & Jindal, R. (2022). In vitro-studies of adenosine- β-cyclodextrin inclusion complexes loaded into chitosan, sodium alginate and bentonite-based nanocomposite optimized by RSM as a sustained release system. In Journal of Applied Polymer Science (Vol. 139, Issue 31). 
     URL: https://doi.org/10.1002/app.52706


515. Sinha, R. R., & Khanna, B. (2022). Estimation of population mean under probability proportional to size sampling with and without measurement errors. Concurrency and Computation: Practice and Experience. 
     URL: https://doi.org/10.1002/cpe.7023


516. Mukhopadhyay, A., & Shaw, V. P. (2022). Effect of anisotropic abrasive damage on mass loss and ultimate tensile properties of the stretch denim fabric. In International Journal of Clothing Science and Technology. 
     URL: https://doi.org/10.1108/IJCST-01-2022-0015


517. Bagha, A. K., Tiwari, S., Kumari, S., Samyal, R., Bedi, R., Sharma, N., & Bahl, S. (2022). Finite element model updating of microwave welded lap joint with direct updating algorithm. In Physica Scripta (Vol. 97, Issue 8). 
     URL: https://doi.org/10.1088/1402-4896/ac7efd


518. Singh, J., Goyal, K. K., Kumar, R., & Gupta, V. (2022). Development of artificial intelligence-based neural network prediction model for responses of additive manufactured polylactic acid parts. In Polymer Composites. 
     URL: https://doi.org/10.1002/pc.26876


519. Singh, R. P., Kataria, R., Abidi, M. H., Ranjan, S., Gupta, A. K., & Al-Ahmari, A. (2022). Surface Morphology And Machinability Aspects In Wire-EDM Of Incoloy-800 Superalloy: An Experimental Evaluation and Microstructure Analysis. In Surface Review and Letters. 
     URL: https://doi.org/10.1142/S0218625X22501050


520. Sethi, S., Thakur, S., Sharma, D., Singh, G., Sharma, N., Kaith, B. S., Khullar, S., & Medha. (2022). Malic acid cross-linked chitosan based hydrogel for highly effective removal of chromium (VI) ions from aqueous environment. In Reactive and Functional Polymers (Vol. 177). 
     URL: https://doi.org/10.1016/j.reactfunctpolym.2022.105318


521. Ahirwar, A. D., & Chore, H. S. (2022). Strength characterization of steel slag–cement-stabilized marine clay mixes for highway construction. In Innovative Infrastructure Solutions (Vol. 7, Issue 4). 
     URL: https://doi.org/10.1007/s41062-022-00846-4


522. Srivastava, S., Garg, R. K., Sachdeva, A., & Sharma, V. S. (2022). A multi-tier layer-wise thermal management study for long-scale wire-arc additive manufacturing. In Journal of Materials Processing Technology (Vol. 306). 
     URL: https://doi.org/10.1016/j.jmatprotec.2022.117651


523. Gupta, V. K., Kumar, S., & Kukreja, R. (2022). Experimental investigation of a volumetric solar collector using natural extract of Azadirachta Indica based heat transfer fluids. In Sustainable Energy Technologies and Assessments (Vol. 52). 
     URL: https://doi.org/10.1016/j.seta.2022.102325


524. Kumar, S., Samriya, J. K., Yadav, A. S., & Kumar, M. (2022). To improve scalability with Boolean matrix using efficient gossip failure detection and consensus algorithm for PeerSim simulator in IoT environment. In International Journal of Information Technology (Singapore). 
     URL: https://doi.org/10.1007/s41870-022-00989-8


525. Aggarwal, A., & Sah, M. K. (2022). Process optimization for extraction of avian eggshell membrane derived collagen for tissue engineering applications. In Journal of Polymer Engineering. 
     URL: https://doi.org/10.1515/polyeng-2021-0315


526. Dash, A., Jain, K., Ghosh, N., & Patra, A. (2022). Non-invasive detection of coronary artery disease from photoplethysmograph using lumped parameter modelling. In Biomedical Signal Processing and Control (Vol. 77). 
     URL: https://doi.org/10.1016/j.bspc.2022.103781


527. Sharma, P., Kumar, H., Singla, M., kumar, V., Ghfar, A. A., & Pandey, S. (2022). Micellization, surface activities, and thermodynamic studies on the ionic liquid in the presence of vitamins. In Journal of Molecular Liquids (Vol. 359). 
     URL: https://doi.org/10.1016/j.molliq.2022.119152


528. Jaryal, R., Kumar, R., & Khullar, S. (2022). Mixed metal-metal organic frameworks (MM-MOFs) and their use as efficient photocatalysts for hydrogen evolution from water splitting reactions. In Coordination Chemistry Reviews (Vol. 464). 
     URL: https://doi.org/10.1016/j.ccr.2022.214542


529. Singh, G., Kumar, S., Kanaujia, B. K., & Pandey, V. K. (2022). Design and implementation of a compact tri-band four-port multiple-input-multiple-output antenna. In International Journal of RF and Microwave Computer-Aided Engineering (Vol. 32, Issue 8). 
     URL: https://doi.org/10.1002/mmce.23218


530. Bajaj, C., Upadhyay, D. K., Kumar, S., & Kumar Kanaujia, B. (2022). A Dual-Band Circularly Polarized Hexagonal Ring Antenna for Handheld RFID Readers. In Wireless Personal Communications. 
     URL: https://doi.org/10.1007/s11277-022-09700-3


531. Khushbu, & Jindal, R. (2022). β-Cyclodextrin mediated efficient removal of rose Bengal using chitosan/sodium alginate/graphene oxide nanocomposite: a comparative study. Iranian Polymer Journal (English Edition). 
     URL: https://doi.org/10.1007/s13726-022-01053-9


532. Hernández-Verón, M. A., Yadav, N., Magreñán, Á. A., Martínez, E., & Singh, S. (2022). An improvement of the Kurchatov method by means of a parametric modification. Mathematical Methods in the Applied Sciences. 
     URL: https://doi.org/10.1002/mma.8209


533. Jain, S., Sahni, R., Khargonkar, T., Gupta, H., Verma, O. P., Sharma, T. K., Bhardwaj, T., Agarwal, S., & Kim, H. (2022). Automatic Rice Disease Detection and Assistance Framework Using Deep Learning and a Chatbot. In Electronics (Switzerland) (Vol. 11, Issue 14). 
     URL: https://doi.org/10.3390/electronics11142110


534. Ilyas, B., Rupali, S., & Arvind, K. (2022). Evaluation of Shear Strength Parameters in Unreinforced and Shotcrete Reinforced Coal through Experimental and Numerical Methods. In Disaster Advances (Vol. 15, Issue 7, pp. 10–17). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85133231046&partnerID=40&md5=2a19771e73a876e444fcde8a1dee842f


535. Zaidi, A. M., Khan, T., Beg, M. T., Kanaujia, B. K., & Rambabu, K. (2022). Dual-Band Design Techniques for Microwave Passive Circuits: A Review and Applications. In IEEE Microwave Magazine (Vol. 23, Issue 7, pp. 61–77). 
     URL: https://doi.org/10.1109/MMM.2022.3163454


536. Singh, S., Nandan, A. S., Sikka, G., Malik, A., & Vidyarthi, A. (2022). A secure energy-efficient routing protocol for disease data transmission using IoMT. In Computers and Electrical Engineering (Vol. 101). 
     URL: https://doi.org/10.1016/j.compeleceng.2022.108113


537. Singh, V., Sharma, K. P., & Verma, H. K. (2022). ABNT: Adaptive beaconing and neighbor timeout for geographical routing in UAV networks. In Peer-to-Peer Networking and Applications (Vol. 15, Issue 4, pp. 2079–2100). 
     URL: https://doi.org/10.1007/s12083-022-01341-4


538. Sriram, N., Mukherjee, S., & Sah, M. K. (2022). Gene expression profiling and protein–protein interaction analysis reveals the dynamic role of MCM7 in Alzheimer’s disorder and breast cancer. In 3 Biotech (Vol. 12, Issue 7). 
     URL: https://doi.org/10.1007/s13205-022-03207-1


539. Kushwaha, D. K., Panchal, D., & Sachdeva, A. (2022). Intuitionistic fuzzy modelling-based integrated framework for performance analysis of juice clarification unit. In Applied Soft Computing (Vol. 124). 
     URL: https://doi.org/10.1016/j.asoc.2022.109056


540. Pratibha, & Rajput, J. K. (2022). Synergistically enhanced solar light-driven degradation of hazardous food colorants by ultrasonically derived MgFe2O4/S-doped g-C3N4 nanocomposite: A Z-scheme system-based heterojunction approach. In Applied Organometallic Chemistry (Vol. 36, Issue 7). 
     URL: https://doi.org/10.1002/aoc.6745


541. Sai, K., Sood, N., & Saini, I. (2022). Abiotic stress classification through spectral analysis of enhanced electrophysiological signals of plants. In Biosystems Engineering (Vol. 219, pp. 189–204). 
     URL: https://doi.org/10.1016/j.biosystemseng.2022.04.025


542. Mahajan, S., & Rani, R. (2022). Word Level Script Identification Using Convolutional Neural Network Enhancement for Scenic Images. In ACM Transactions on Asian and Low-Resource Language Information Processing (Vol. 21, Issue 4). 
     URL: https://doi.org/10.1145/3506699


543. Sreekumar, S., Yamujala, S., Sharma, K. C., Bhakar, R., Simon, S. P., & Rana, A. S. (2022). Flexible Ramp Products: A solution to enhance power system flexibility. In Renewable and Sustainable Energy Reviews (Vol. 162). 
     URL: https://doi.org/10.1016/j.rser.2022.112429


544. Kumar, R., & Bhatia, V. (2022). Some inequalities related to eigenvalues. In Advances in Operator Theory (Vol. 7, Issue 3). 
     URL: https://doi.org/10.1007/s43036-022-00193-2


545. Kapoor, A., & Kaur Rajput, J. (2022). Open chain conjugated azomethine derived optical biosensor for selective and ultrasensitive colorimetric detection of biomarker glutathione in human blood serum. Dyes and Pigments, 203. 
     URL: https://doi.org/10.1016/j.dyepig.2022.110336


546. Sharma, R., Kumar, H., Singla, M., Kumar, V., Al-Kahtani, A. A., & Pandey, S. (2022). Volumetric and acoustic properties of L-phenyl glycine and L-phenylalanine in aqueous solution of 1-dodecyl-3-methylimidazolium bromide [C12mim] [Br]. Journal of Molecular Liquids, 357. 
     URL: https://doi.org/10.1016/j.molliq.2022.119014


547. Singh, J., Singh, A., Arora, K. S., & Shukla, D. K. (2022). Multi-objective Optimization of Process Parameters during Dissimilar Cold Metal Transfer Weld-Brazing of Al-Steel. Transactions of the Indian Institute of Metals. 
     URL: https://doi.org/10.1007/s12666-022-02567-9


548. Chawla, T., Khosla, M., & Raj, B. (2022). Extended Gate to source overlap Heterojunction Vertical TFET: Design, analysis, and optimization with process parameter variations. Materials Science in Semiconductor Processing, 145. 
     URL: https://doi.org/10.1016/j.mssp.2022.106643


549. Pathak, S., Raj, R., Singh, K., Verma, P. K., & Kumar, B. (2022). Development of portable and robust cataract detection and grading system by analyzing multiple texture features for Tele-Ophthalmology. Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-12544-5


550. Kumar, N., Verma, S., Park, J., Chandra Srivastava, V., & Naushad, M. (2022). Evaluation of photocatalytic performances of PEG and PVP capped zinc sulfide nanoparticles towards organic environmental pollutant in presence of sunlight. Chemosphere, 298. 
     URL: https://doi.org/10.1016/j.chemosphere.2022.134281


551. Sharma, V., Singh, J., Sharma, V. S., Sachdeva, A., Gupta, M. K., & Singh, S. (2022). Investigations on Mechanical Properties of Polyamide Parts Fabricated by Selective Laser Sintering Process. Journal of Materials Engineering and Performance. 
     URL: https://doi.org/10.1007/s11665-022-06657-z


552. Choudhary, D., & Pahuja, R. (2022). Deep Learning Approach for Encryption Techniques in Vehicular Networks. Wireless Personal Communications. 
     URL: https://doi.org/10.1007/s11277-022-09538-9


553. Sajwan, A., & Yadav, A. (2022). A study of exploratory and stability analysis of artificial electric field algorithm. Applied Intelligence. 
     URL: https://doi.org/10.1007/s10489-021-02865-7


554. Kumar, S., Gupta, H., Yadav, D., Ansari, I. A., & Verma, O. P. (2022). YOLOv4 algorithm for the real-time detection of fire and personal protective equipments at construction sites. In Multimedia Tools and Applications (Vol. 81, Issue 16, pp. 22163–22183). 
     URL: https://doi.org/10.1007/s11042-021-11280-6


555. Mittal, M., Khosla, M., & Chawla, T. (2022). Design and Performance Analysis of Delta-Doped Hetro-Dielectric GeOI Vertical TFET. In Silicon (Vol. 14, Issue 10, pp. 5503–5511). 
     URL: https://doi.org/10.1007/s12633-021-01315-w


556. Kamboj, A., Rani, R., & Nigam, A. (2022). A comprehensive survey and deep learning-based approach for human recognition using ear biometric. In Visual Computer (Vol. 38, Issue 7, pp. 2383–2416). 
     URL: https://doi.org/10.1007/s00371-021-02119-0


557. Kaur, P., Rajput, J. K., Singh, K., Khullar, P., & Bakshi, M. S. (2022). Ag and Au Nanoparticles as Color Indicators for Monomer/Micelle-Nanoparticle Interactions. In Langmuir. 
     URL: https://doi.org/10.1021/acs.langmuir.2c00853


558. Satish, P., Ujjwal, S., & Mukul, S. (2022). Investigating the sustainability of concrete by replacing cement with fly-ash and brick kiln dust (Vol. 2413). 
     URL: https://doi.org/10.1063/5.0079728


559. Kaur, G., Kumar, H., Singla, M., & Singh, H. (2022). Influence of an antibiotic drug neomycin sulphate on mixed micellization behavior of imidazolium based surface-active ionic liquids in aqueous media. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 642. 
     URL: https://doi.org/10.1016/j.colsurfa.2022.128661


560. Sharma, A., Awasthi, A., Singh, T., Kumar, R., & Chauhan, R. (2022). Experimental investigation and optimization of potential parameters of discrete V down baffled solar thermal collector using hybrid Taguchi-TOPSIS method. Applied Thermal Engineering, 209. 
     URL: https://doi.org/10.1016/j.applthermaleng.2022.118250


561. Vaid, V., & Jindal, R. (2022). An efficient pH-responsive kappa-carrageenan/tamarind kernel powder hydrogel for the removal of brilliant green and rose bengal from aqueous solution. Journal of Applied Polymer Science, 139(21). 
     URL: https://doi.org/10.1002/app.52218


562. Chakraborty, N., Lamba, M., Juglan, K. C., & Kumar, H. (2022). Temperature-dependent thermodynamic studies of glycols in aqueous solutions of vitamin B3 (Vol. 2267, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2267/1/012134


563. Chakraborty, N., Bhakri, K., Juglan, K. C., & Kumar, H. (2022). Physicochemical studies of polyethylene glycols in aqueous biotin solutions at different temperatures and constant pressure (Vol. 2267, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2267/1/012124


564. Kaur, H., Patnaik, P., & Kumar, H. (2022). Study of Molecular interactions of glycols with D-Mannitol at different temperature (Vol. 2267, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2267/1/012047


565. Kumari, P., Kumar, G., Prasher, S., Kumar, M., Kumar, S., Mehra, R., & Kaur, S. (2022). Mathematical Modelling to estimate Radon exhalation rates: A study on soil samples from Pangi valley of Chamba district, Himachal Pradesh, India (Vol. 2267, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2267/1/012123


566. Kaur, P., Juglan, K. C., & Kumar, H. (2022). Acoustic studies of molecular interactions of chlorhexidine with glycols at different temperatures (Vol. 2267, Issue 1). 
     URL: https://doi.org/10.1088/1742-6596/2267/1/012114


567. Chakraborty, J. N., & Kamboj, A. (2022). Self-powered thermal regulation textiles. In Asian Dyer (Vol. 19, Issue 3, pp. 27–33). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85134321542&partnerID=40&md5=700ca1cf53d3b4f11899d0801cd2144c


568. Almuflih, A. S., Sharma, J., Tyagi, M., Bhardwaj, A., Qureshi, M. R. N. M., & Khan, N. (2022). Leveraging the Dynamics of Food Supply Chains towards Avenues of Sustainability. In Sustainability (Switzerland) (Vol. 14, Issue 12). 
     URL: https://doi.org/10.3390/su14126958


569. Chahal, N., Dutt, S., & Kumar, A. (2022). Quark matter properties and fluctuations of conserved charges in (2+1)-flavored quark model. In Chinese Physics C (Vol. 46, Issue 6). 
     URL: https://doi.org/10.1088/1674-1137/ac56d0


570. Singh, N., Sharma, B., & Rathee, M. (2022). Carbonation resistance of blended mortars and industrial by-products: A brief review. In Cleaner Materials (Vol. 4). 
     URL: https://doi.org/10.1016/j.clema.2022.100058


571. Chinky, Kumar, P., Dogra, A. R., & Malik, P. (2022). Interdependency among electro-optic characteristics and absorption coefficient of homeotropically aligned liquid crystal considering Beer’s law theory. In Bulletin of Materials Science (Vol. 45, Issue 2). 
     URL: https://doi.org/10.1007/s12034-022-02667-8


572. Bedi, D., Sharma, S., Tiwari, S. K., & Ajori, S. (2022). Effect of defects and boundary conditions on the vibrational behavior of carbon nanotube and graphene: A molecular dynamics perspective. In Diamond and Related Materials (Vol. 126). 
     URL: https://doi.org/10.1016/j.diamond.2022.109052


573. Dash, S., Thakur, S., Bhavanam, A., & Gera, P. (2022). Catalytic pyrolysis of alkaline lignin: A systematic kinetic study. In Bioresource Technology Reports (Vol. 18). 
     URL: https://doi.org/10.1016/j.biteb.2022.101064


574. Singh, S., & Jung, K.-H. (2022). Special issue on emerging technologies for information hiding and forensics in multimedia systems. In Multimedia Tools and Applications (Vol. 81, Issue 14, pp. 19463–19470). 
     URL: https://doi.org/10.1007/s11042-022-13190-7


575. Sharma, N., & Sharma, S. (2022). Analyzing the effect of chirality and defects on mechanical properties of carbon nanotube reinforced polycarbonate composites using molecular dynamics. In Modelling and Simulation in Materials Science and Engineering (Vol. 30, Issue 4). 
     URL: https://doi.org/10.1088/1361-651X/ac64b7


576. Kumari, M., & Kumar, A. (2022). Effect of vector interaction on magnetized strange quark matter and strange quark star. In Nuclear Physics A (Vol. 1022). 
     URL: https://doi.org/10.1016/j.nuclphysa.2022.122442


577. Archana, A. R., & Akbar, M. A. (2022). A comparative study on structural irregularity of open-office buildings. Asian Journal of Civil Engineering. 
     URL: https://doi.org/10.1007/s42107-022-00438-8


578. Bisht, R., & Sikander, A. (2022). An improved method based on fuzzy logic with beta parameter for PV MPPT system. Optik, 259. 
     URL: https://doi.org/10.1016/j.ijleo.2022.168939


579. Shivani, Rani, D., & Ebrahimnejad, A. (2022). An approach to solve an unbalanced fully rough multi-objective fixed-charge transportation problem. Computational and Applied Mathematics, 41(4). 
     URL: https://doi.org/10.1007/s40314-022-01830-5


580. Kumar, A., & Sunkaria, R. K. (2022). Design of uniform cosine modulated filter bank using IACOR-LS and its application in baseline wander removal from ECG signal. AEU - International Journal of Electronics and Communications, 150. 
     URL: https://doi.org/10.1016/j.aeue.2022.154198


581. Singh, N., & Singh, S. P. (2022). Natural Carbonation Resistance of RCA-SCC Blended with Mineral Admixtures. Journal of The Institution of Engineers (India): Series A. 
     URL: https://doi.org/10.1007/s40030-022-00620-w


582. Yadav, J., Rani, M., & Shanker, U. (2022). An integrated hybrid nanoplatform with polymer coating: Zinc based green nanocomposites with improved photoactivity under sunlight irradiation. Journal of Environmental Chemical Engineering, 10(3). 
     URL: https://doi.org/10.1016/j.jece.2022.107452


583. Kaur, P., Rajput, J. K., Khullar, P., & Bakshi, M. S. (2022). Pluronics and tetronics micelles for colloidal stabilization and their complexation tendency with gold nanoparticles. Journal of Molecular Liquids, 355. 
     URL: https://doi.org/10.1016/j.molliq.2022.118961


584. Behera, G. R., Mukhopadhyay, A., & Sikka, M. (2022). Development of scheme to evaluate the performance of parachute canopy fabrics under tensile impact. Journal of Industrial Textiles. 
     URL: https://doi.org/10.1177/15280837221080103


585. Sharma, N., Sharma, V. S., Chandmal Sharma, R., Arora, R., & Sharma, A. (2022). Development of quality microholes by electrical discharge drilling on Al/SiC composite using of Grey-desirability approach. International Journal of Lightweight Materials and Manufacture, 5(2), 267–277. 
     URL: https://doi.org/10.1016/j.ijlmm.2022.02.004


586. Uttam, D., Sinha, S. K., Choubisa, B., & Jana, D. (2022). Prediction of the effect of pile height on light fastness of carpets. In Man-Made Textiles in India (Vol. 50, Issue 4, pp. 117–121). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85129313336&partnerID=40&md5=6b4521313a9f927cb828f118923f55ef


587. Singh, J., Alba-Baena, N., Trehan, R., & Sharma, V. S. (2022). Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite. Journal of Materials Engineering and Performance. 
     URL: https://doi.org/10.1007/s11665-021-06570-x


588. Meena, P., Kumar, M., Singh, M., Kumar Shukla, D., Burela, R. G., Jhunjhunwala, P., Gupta, A., & Pandey, C. (2022). Numerical Analysis of Different SUS304 Steel Weld Joint Configurations Using new Prescribed Temperature Approach. Transactions of the Indian Institute of Metals. 
     URL: https://doi.org/10.1007/s12666-021-02389-1


589. Kumar, K., Sumit, Kumar, S., Singh, L. K., & Mishra, A. (2022). Predicting reliability of software in industrial systems using a Petri net based approach: A case study on a safety system used in nuclear power plant. Information and Software Technology, 146. 
     URL: https://doi.org/10.1016/j.infsof.2022.106895


590. Sohal, A., Kumar, K., & Kumar, R. (2022). Heat transfer enhancement with channel surface roughness: A comprehensive review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 
     URL: https://doi.org/10.1177/09544062211065689


591. Nassar, R.-U.-D., Singh, N., Varsha, S., Sai, A. R., & Sufyan-Ud-Din, M. (2022). Strength, electrical resistivity and sulfate attack resistance of blended mortars produced with agriculture waste ashes. Case Studies in Construction Materials, 16. 
     URL: https://doi.org/10.1016/j.cscm.2022.e00944


592. Attri, P., Garg, S., & Ratan, J. K. (2022). Degradation of 4-aminopyridine using bio-mediated Ag-doped Cu2O nanoparticles under visible light. Nanotechnology for Environmental Engineering. 
     URL: https://doi.org/10.1007/s41204-021-00182-5


593. Peng, H., He, W., Zhang, Y., Li, X., Ding, Y., Menon, V. G., & Verma, S. (2022). Covert non-orthogonal multiple access communication assisted by multi-antenna jamming. Physical Communication, 52. 
     URL: https://doi.org/10.1016/j.phycom.2022.101598


594. Kaur, H., & Pahuja, S. K. (2022). DATA SECURITY - The NEXT IMPERATIVE in HEALTHCARE SYSTEMS. Biomedical Engineering - Applications, Basis and Communications. 
     URL: https://doi.org/10.4015/S1016237222500089


595. Sharma, A., & Chauhan, R. (2022). Integrated and separate collector storage type low-temperature solar water heating systems with latent heat storage: A review. Sustainable Energy Technologies and Assessments, 51. 
     URL: https://doi.org/10.1016/j.seta.2021.101935


596. Verma, S. (2022). Energy-efficient routing paradigm for resource-constrained Internet of Things-based cognitive smart city. In Expert Systems (Vol. 39, Issue 5). 
     URL: https://doi.org/10.1111/exsy.12905


597. Kad, P., & Singh, A. (2022). Combined Effect of Spatio-Temporal Dynamics of Laser Pulse on Electron Acceleration in Relativistic Plasma. In IEEE Transactions on Plasma Science (Vol. 50, Issue 6, pp. 1518–1523). 
     URL: https://doi.org/10.1109/TPS.2021.3124548


598. Pathania, A. S., Jana, A. K., & Jana, M. M. (2022). Valorization of waste frying oil to lipopeptide biosurfactant by indigenous Bacillus licheniformis through co-utilization in mixed substrate fermentation. In Brazilian Journal of Chemical Engineering (Vol. 39, Issue 2, pp. 369–385). 
     URL: https://doi.org/10.1007/s43153-021-00170-x


599. Thakur, N., Bhadwal, R., Kumar, J., Kaur, M., Mehra, R., & Kumar, A. (2022). Effect of natural radionuclide’s in the environment along the Jwalamukhi thrust of Himachal Pradesh, North West Himalayas, India. In Environmental Geochemistry and Health (Vol. 44, Issue 6, pp. 1783–1793). 
     URL: https://doi.org/10.1007/s10653-021-01103-w


600. Butola, R., Singh, R. P., Choudhary, N., Mer, K. K. S., Bhaskar, J., & Singari, R. M. (2022). Fabrication of FSW Tool Pins Through Turning of H13 Tool Steel: A Comparative Analysis for Residual Stresses. In Journal of Advanced Manufacturing Systems (Vol. 21, Issue 2, pp. 351–366). 
     URL: https://doi.org/10.1142/S0219686722500135


601. Bedi, A. K., & Sunkaria, R. K. (2022). Ultrasound speckle reduction using adaptive wavelet thresholding. In Multidimensional Systems and Signal Processing (Vol. 33, Issue 2, pp. 275–300). 
     URL: https://doi.org/10.1007/s11045-021-00799-4


602. Kaushal, P., Chaudhary, T., & Khanna, G. (2022). Effect of Tensile Strain on Performance Parameters of Different Structures of MoS2 Monolayer. In Silicon (Vol. 14, Issue 9, pp. 4935–4943). 
     URL: https://doi.org/10.1007/s12633-021-01256-4


603. Vidyarthi, A., & Malik, A. (2022). A hybridized modified densenet deep architecture with CLAHE algorithm for humpback whale identification and recognition. In Multimedia Tools and Applications (Vol. 81, Issue 14, pp. 19779–19793). 
     URL: https://doi.org/10.1007/s11042-021-11034-4


604. Kumar, G., Goyal, K. K., Batra, N. K., & Rani, D. (2022). Single part reconfigurable flow line design using fuzzy best worst method. In OPSEARCH (Vol. 59, Issue 2, pp. 603–631). 
     URL: https://doi.org/10.1007/s12597-021-00550-4


605. Gupta, H., & Verma, O. P. (2022). Monitoring and surveillance of urban road traffic using low altitude drone images: a deep learning approach. In Multimedia Tools and Applications (Vol. 81, Issue 14, pp. 19683–19703). 
     URL: https://doi.org/10.1007/s11042-021-11146-x


606. Singh, J., Chakraborty, D., & Kumar, N. (2022). Design and Parametric Variation Assessment of Dopingless Nanotube Field-Effect Transistor (DL-NT-FET) for High Performance. In Silicon (Vol. 14, Issue 8, pp. 4097–4105). 
     URL: https://doi.org/10.1007/s12633-021-01182-5


607. Mangla, M., Sharma, N., & Mohanty, S. N. (2022). A sequential ensemble model for software fault prediction. In Innovations in Systems and Software Engineering (Vol. 18, Issue 2, pp. 301–308). 
     URL: https://doi.org/10.1007/s11334-021-00390-x


608. Kumar, H., Kaur, J., & Awasthi, P. (2022). Investigation of aggregation and surface active properties of cationic Gemini surfactants in the presence of antidepressant drug. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 641. 
     URL: https://doi.org/10.1016/j.colsurfa.2022.128539


609. Agarwal, S., Tyagi, M., & Garg, R. K. (2022). Restorative measures to diminish the covid-19 pandemic effects through circular economy enablers for sustainable and resilient supply chain. In Journal of Asia Business Studies (Vol. 16, Issue 3, pp. 538–567). 
     URL: https://doi.org/10.1108/JABS-05-2021-0217


610. Kumar, Y., Kumar, R., Asokan, K., Meena, R., Choudhary, R. J., & Singh, A. P. (2022). 120 MeV Ag9+ induced modifications in the structural, electrical and optical properties of La-doped SrSnO3 thin films. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 519, 22–27. 
     URL: https://doi.org/10.1016/j.nimb.2022.03.006


611. Kaur, R., Kumar, H., & Singla, M. (2022). A thermodynamic investigation of the effect of cationic structure on the self-aggregation behavior of Surface-Active ionic liquids in the presence of an amino acid. Journal of Molecular Liquids, 354. 
     URL: https://doi.org/10.1016/j.molliq.2022.118904


612. Singh, S., Nandan, A. S., Malik, A., Kumar, R., Awasthi, L. K., & Kumar, N. (2022). A GA-Based Sustainable and Secure Green Data Communication Method Using IoT-Enabled WSN in Healthcare. In IEEE Internet of Things Journal (Vol. 9, Issue 10, pp. 7481–7490). 
     URL: https://doi.org/10.1109/JIOT.2021.3108875


613. Amirchand, K. D., & Singh, V. (2022). Density, speed of sound, and surface tension of binary aqueous solutions containing ammonium based protic ionic liquids. Journal of Molecular Liquids, 354. 
     URL: https://doi.org/10.1016/j.molliq.2022.118845


614. Sharma, S., & Tiwari, S. K. (2022). A novel feature extraction method based on weighted multi-scale fluctuation based dispersion entropy and its application to the condition monitoring of rotary machines. Mechanical Systems and Signal Processing, 171. 
     URL: https://doi.org/10.1016/j.ymssp.2022.108909


615. Kataria, R., Jha, K., & Singh, R. P. (2022). Guest editorial: Trends in advanced materials and processes for industrial solicitations. In World Journal of Engineering (Vol. 19, Issue 3, p. 265). 
     URL: https://doi.org/10.1108/WJE-06-2022-703


616. Singh, R. P., Kumar, N., Gupta, A. K., & Painuly, M. (2022). Investigation into rotary mode ultrasonic drilling of bioceramic: an experimental study with PSO-TLBO based evolutionary optimization. In World Journal of Engineering (Vol. 19, Issue 3, pp. 274–290). 
     URL: https://doi.org/10.1108/WJE-03-2021-0179


617. Ambade, S., Tembhurkar, C., Patil, A. P., Pantawane, P., & Singh, R. P. (2022). Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis. In World Journal of Engineering (Vol. 19, Issue 3, pp. 266–273). 
     URL: https://doi.org/10.1108/WJE-03-2021-0146


618. Sharma, R. C., Dabra, V., Singh, G., Kumar, R., Singh, R. P., & Sharma, S. (2022). Multi-response optimization while machining of stainless steel 316L using intelligent approach of grey theory and grey-TLBO. In World Journal of Engineering (Vol. 19, Issue 3, pp. 329–339). 
     URL: https://doi.org/10.1108/WJE-06-2020-0226


619. Singh, R., Singh, R. P., & Trehan, R. (2022). Parametric investigation of tool wear rate in EDM of Fe-based shape memory alloy: microstructural analysis and optimization using genetic algorithm. In World Journal of Engineering (Vol. 19, Issue 3, pp. 418–428). 
     URL: https://doi.org/10.1108/WJE-04-2021-0203


620. Butola, R., Yuvaraj, N., Singh, R. P., Tyagi, L., & Khan, F. (2022). Evaluation of microhardness and wear properties of Al 6063 composite reinforced with yttrium oxide using stir casting process. In World Journal of Engineering (Vol. 19, Issue 3, pp. 361–367). 
     URL: https://doi.org/10.1108/WJE-12-2020-0645


621. Sahu, S., Ukey, P. D., Kumar, N., Singh, R. P., & Ansari, M. Z. (2022). Three dimensional modelling of aluminum foam through computed tomography scan technique. In World Journal of Engineering (Vol. 19, Issue 3, pp. 340–345). 
     URL: https://doi.org/10.1108/WJE-12-2020-0649


622. Gahrotra, R., Sharma, V., Malik, P., & Kumar, P. (2022). Microscopic studies of chiral nematic liquid crystal doped with dichroic dye (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080701


623. Kaur, G., Malik, P., & Kumar, P. (2022). Dielectric and UV-Vis studies in silica nanoparticles dispersed liquid crystalline composites (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080575


624. Kumar, H., & Kaur, G. (2022). Modulations induced in the self-aggregation behavior and thermodynamic properties by altering the nature of counterion in aqueous media: A conductometric study (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080657


625. Kumar, H., & Sharma, P. (2022). Influence of amphiphilic drugs on the micellization behavior of imidazolium based ionic liquids: A review (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0086135


626. Neopaney, B. D., Chakraborty, N., Juglan, K. C., Kumar, H., & Riyal, M. K. (2022). Investigation on temperature-dependent volumetric and acoustical properties of glycols containing xylitol (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080552


627. Kumar, H., Kaur, J., & Awasthi, P. (2022). An analysis of the aggregation behaviour of an ionic liquid into water+ carbohydrate solutions - A review (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0081213


628. Dogra, A. R., Kumar, P., Sharma, V., Malik, P., Khanra, P., & Kapoor, M. (2022). Deposition of nanoparticles layer on ITO substrate and its application for alignment control of liquid crystal (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080664


629. Gupta, G., & Rani, D. (2022). Method to solve fixed charge transportation problems with interval parameters (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080754


630. Kumar, H., & Kaur, R. (2022). Investigating the micellization behavior of surface active ionic liquids in the presence of amino acids: A review (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0081009


631. Kumar, H., & Sharma, R. (2022). Study of interactions between amino acids and imidazoluim based ionic liquids through volumetric analysis at various temperature (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0086336


632. Sharma, V., Kumar, P., Raina, K. K., & Malik, P. (2022). Quantitative analysis of liquid crystal droplet in polymer dispersed liquid crystal using image processing (Vol. 2357). 
     URL: https://doi.org/10.1063/5.0080666


633. Pratibha, Kapoor, A., & Rajput, J. K. (2022). Nanostructured materials for the visible-light driven hydrogen evolution by water splitting: A review. International Journal of Hydrogen Energy. 
     URL: https://doi.org/10.1016/j.ijhydene.2022.03.232


634. Sharma, A., Bhanot, N., Gupta, A., & Trehan, R. (2022). Application of Lean Six Sigma framework for improving manufacturing efficiency: a case study in Indian context. In International Journal of Productivity and Performance Management (Vol. 71, Issue 5, pp. 1561–1589). 
     URL: https://doi.org/10.1108/IJPPM-05-2020-0223


635. Ding, C., Zhang, C., Ma, L., & Sharma, A. (2022). Numerical investigation on melting behaviour of phase change materials/metal foam composites under hypergravity conditions. Applied Thermal Engineering, 207. 
     URL: https://doi.org/10.1016/j.applthermaleng.2022.118153


636. Vuggili, S. B., Gaur, U. K., & Sharma, M. (2022). 2D/2D facial interaction of nitrogen-doped g-C3N4/In2S3 nanosheets for high performance by visible-light-induced photocatalysis. Journal of Alloys and Compounds, 902. 
     URL: https://doi.org/10.1016/j.jallcom.2022.163757


637. Chand, R., Sharma, V. S., Trehan, R., & Gupta, M. K. (2022). A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications. Rapid Prototyping Journal. 
     URL: https://doi.org/10.1108/RPJ-09-2021-0250


638. Kumari, M., & Kumar, A. (2022). Antikaon condensation in magnetized neutron stars. In International Journal of Modern Physics E (Vol. 31, Issue 5). 
     URL: https://doi.org/10.1142/S0218301322500501


639. Sharma, P., Pahuja, S. K., & Veer, K. (2022). A Systematic Review of Machine Learning Based Gait Characteristics in Parkinson’s Disease. In Mini-Reviews in Medicinal Chemistry (Vol. 22, Issue 8, pp. 1216–1229). 
     URL: https://doi.org/10.2174/1389557521666210927151553


640. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Suman, R., & Kumar, L. (2022). Significance of 4D printing for dentistry: Materials, process, and potentials. In Journal of Oral Biology and Craniofacial Research (Vol. 12, Issue 3, pp. 388–395). 
     URL: https://doi.org/10.1016/j.jobcr.2022.05.002


641. Verma, S., Kango, S., Bagha, A. K., & Bahl, S. (2022). Finite element model updating of smart structures with direct updating algorithm. In Physica Scripta (Vol. 97, Issue 5). 
     URL: https://doi.org/10.1088/1402-4896/ac64d3


642. Kumar, S., Singh, M. K., Al-Tamimi, N., Alotaibi, B. S., & Abuhussain, M. A. (2022). Investigation on Subjects’ Seasonal Perception and Adaptive Actions in Naturally Ventilated Hostel Dormitories in the Composite Climate Zone of India. In Sustainability (Switzerland) (Vol. 14, Issue 9). 
     URL: https://doi.org/10.3390/su14094997


643. Goyal, P., Mishra, V., Dhamija, I., Kumar, N., & Kumar, S. (2022). Immobilization of catalase on functionalized magnetic nanoparticles: a statistical approach. 3 Biotech, 12(5). 
     URL: https://doi.org/10.1007/s13205-022-03173-8


644. Gahrotra, R., Sharma, V., Dogra, A. R., Malik, P., & Kumar, P. (2022). Performance augmentation of bistable cholesteric liquid crystal light shutter- effect of dichroic dye on morphological and electro-optical characteristics. Optical Materials, 127. 
     URL: https://doi.org/10.1016/j.optmat.2022.112243


645. Choudhary, A., Kumar, S., & Sharma, K. P. (2022). RFDCS: A reactive fault detection and classification scheme for clustered wsns. Peer-to-Peer Networking and Applications, 15(3), 1705–1732. 
     URL: https://doi.org/10.1007/s12083-022-01308-5


646. Kumar, K., Kumar, R., & Bharj, R. S. (2022). Thermohydraulic performance enhancement using novel hybrid corrugation configuration channels in thermal systems. International Communications in Heat and Mass Transfer, 134. 
     URL: https://doi.org/10.1016/j.icheatmasstransfer.2022.105999


647. Walia, K., Singh, T., & Singh, A. (2022). Effect of self-focused Cosh-Gaussian beam on second harmonic generation in collisional plasmas. Optik, 258. 
     URL: https://doi.org/10.1016/j.ijleo.2022.168894


648. Shyamal, D. S., Sawai, A., & Kazmi, A. A. (2022). A review on the urban municipal solid waste management system of an Indian Himalayan state. Journal of Material Cycles and Waste Management. 
     URL: https://doi.org/10.1007/s10163-022-01375-z


649. Saini, A., & Ratan, J. K. (2022). Formulation and evaluation of surface-fluorinated microsized-TiO2 based self-cleaning cement: characterization, self-cleaning, depollution and antimicrobial study. Chemical Papers, 76(5), 3201–3214. 
     URL: https://doi.org/10.1007/s11696-022-02093-4


650. Jigyasa, & Rajput, J. K. (2022). Nanomaterial-based sensors as potential remedy for detection of biotoxins. Food Control, 135. 
     URL: https://doi.org/10.1016/j.foodcont.2021.108686


651. Goel, A., Manik, G., & Verma, O. P. (2022). Designing a Robust Analytical Model of a Parabolic Trough Solar Collector Through In-depth Analysis of Convective Heat Transfers. Arabian Journal for Science and Engineering. 
     URL: https://doi.org/10.1007/s13369-021-06473-y


652. Kumar, P., Ratan, J. K., & Divya, N. (2022). Synthesis and Characterization of CeO2, Gr and rGO Nanocomposites at Different Temperature. JOM, 74(5), 1828–1839. 
     URL: https://doi.org/10.1007/s11837-021-05084-0


653. Nandy, S., Adhikari, M., Khan, M. A., Menon, V. G., & Verma, S. (2022). An Intrusion Detection Mechanism for Secured IoMT Framework Based on Swarm-Neural Network. In IEEE Journal of Biomedical and Health Informatics (Vol. 26, Issue 5, pp. 1969–1976). 
     URL: https://doi.org/10.1109/JBHI.2021.3101686


654. Pattanayak, H. S., Verma, H. K., & Sangal, A. L. (2022). Gravitational community detection by predicting diameter. In Discrete Mathematics, Algorithms and Applications (Vol. 14, Issue 4). 
     URL: https://doi.org/10.1142/S1793830921501457


655. Sharma, S. K., Kumar, P., Raj, B., & Raj, B. (2022). In1 − xGaxAs Double Metal Gate-Stacking Cylindrical Nanowire MOSFET for Highly Sensitive Photo Detector. Silicon, 14(7), 3535–3541. 
     URL: https://doi.org/10.1007/s12633-021-01122-3


656. Okte, L., Raman, A., Raj, B., & Kumar, N. (2022). Junctionless Silicon Nanotube Tunnel Field Effect Transistor Based Resistive Temperature Detector. Silicon, 14(7), 3281–3291. 
     URL: https://doi.org/10.1007/s12633-021-01102-7


657. Singh, R., Rani, R., & Kamboj, A. (2022). An Optimized Approach for Intra-Class Fruit Classification Using Deep Convolutional Neural Network. In International Journal of Image and Graphics (Vol. 22, Issue 3). 
     URL: https://doi.org/10.1142/S0219467821400143


658. Rani, R., Dhir, R., Kakkar, D., & Sharma, N. (2022). Script Identification for Printed and Handwritten Indian Documents: An Empirical Study of Different Feature Classifier Combinations. In International Journal of Image and Graphics (Vol. 22, Issue 3). 
     URL: https://doi.org/10.1142/S0219467821400118


659. Haleem, A., Javaid, M., Singh, R. P., & Khan, S. (2022). Guest editorial: Industry 4.0 special issue. In Industrial Robot (Vol. 49, Issue 3, p. 385). 
     URL: https://doi.org/10.1108/IR-05-2022-459


660. Agarwal, S., Tyagi, M., & Garg, R. K. (2022). Framework development and evaluation of Industry 4.0 technological aspects towards improving the circular economy-based supply chain. Industrial Robot, 49(3), 555–581. 
     URL: https://doi.org/10.1108/IR-10-2021-0246


661. Haleem, A., Javaid, M., Singh, R. P., Rab, S., & Suman, R. (2022). Perspectives of cybersecurity for ameliorative Industry 4.0 era: a review-based framework. Industrial Robot, 49(3), 582–597. 
     URL: https://doi.org/10.1108/IR-10-2021-0243


662. Javaid, M., Haleem, A., Rab, S., Singh, R. P., Suman, R., & Mohan, S. (2022). Progressive schema of 5G for Industry 4.0: features, enablers, and services. Industrial Robot, 49(3), 527–543. 
     URL: https://doi.org/10.1108/IR-10-2021-0226


663. Javaid, M., Khan, I. H., Singh, R. P., Rab, S., & Suman, R. (2022). Exploring contributions of drones towards Industry 4.0. Industrial Robot, 49(3), 476–490. 
     URL: https://doi.org/10.1108/IR-09-2021-0203


664. Javaid, M., Haleem, A., Singh, R. P., Rab, S., Suman, R., & Khan, S. (2022). Exploring relationships between Lean 4.0 and manufacturing industry. Industrial Robot, 49(3), 402–414. 
     URL: https://doi.org/10.1108/IR-08-2021-0184


665. Sethi, S., Medha, Singh, G., Sharma, R., Kaith, B. S., Sharma, N., & Khullar, S. (2022). Fluorescent hydrogel of chitosan and gelatin cross-linked with maleic acid for optical detection of heavy metals. Journal of Applied Polymer Science, 139(15). 
     URL: https://doi.org/10.1002/app.51941


666. Khushbu, Vaid, V., Kaur, K., Panwar, A., Devi, A., Bansal, A., & Jindal, R. (2022). A Comparative Evaluation of Sustained Release of Chlorphenamine Based on a Nanocomposite of Chitosan, Pectin and Montmorillonite. ChemistrySelect, 7(14). 
     URL: https://doi.org/10.1002/slct.202104108


667. Hernández-Verón, M. A., Yadav, S., Magreñán, Á. A., Martínez, E., & Singh, S. (2022). Toward a Unified Theory of Inverse-free Two-Step Point-to-point Iterative Processes. AIP Conference Proceedings, 2425. 
     URL: https://doi.org/10.1063/5.0081630


668. Janeoo, S., Reenu, Saroa, A., Kumar, R., & Kaur, H. (2022). Computational investigation of bioactive 2,3-diaryl quinolines using DFT method: FT- IR, NMR spectra, NBO, NLO, HOMO-LUMO transitions, and quantum-chemical properties. Journal of Molecular Structure, 1253. 
     URL: https://doi.org/10.1016/j.molstruc.2021.132285


669. Singh, R. K., & Verma, H. K. (2022). Redis-Based Messaging Queue and Cache-Enabled Parallel Processing Social Media Analytics Framework. In Computer Journal (Vol. 65, Issue 4, pp. 843–857). 
     URL: https://doi.org/10.1093/comjnl/bxaa114


670. Singh, I., & Kumar, S. (2022). Modified Wavelet Method for Solving Two-dimensional Coupled System of Evolution Equations. In Iranian Journal of Mathematical Sciences and Informatics (Vol. 17, Issue 1, pp. 239–259). 
     URL: https://doi.org/10.52547/ijmsi.17.1.239


671. Madhu, A., & Chakraborty, J. (2022). Sustainable Approach for Cotton Fabric Pretreatment with Immobilized Enzymes. In Fibers and Polymers (Vol. 23, Issue 4, pp. 993–1007). 
     URL: https://doi.org/10.1007/s12221-022-4193-1


672. Kumar, P., Singh, M., & Sandhu, S. S. (2022). Wavelet analysis for cyclic combustion dynamics of a multi-cylinder CRDI diesel engine fuelled with a blending of argemone biodiesel-diesel oil. In Chaos (Vol. 32, Issue 4). 
     URL: https://doi.org/10.1063/5.0080910


673. Kaur, M., Bharj, J., Bharj, R. S., & Kumar, R. (2022). Numerical modelling of non-premixed biogas and LPG combustion to study carbon nanostructures formation in flame. Kuwait Journal of Science, 49(2). 
     URL: https://doi.org/10.48129/kjs.11637


674. Sharma, T., Sharma, K. P., & Veer, K. (2022). Evaluation of Electromyogram Signals in the Control of Prosthetic Limb: A Review. Current Signal Transduction Therapy, 17(1). 
     URL: https://doi.org/10.2174/1574362416666210920164335


675. Rajput, K., & Veer, K. (2022). SEMG Based Recognition of Hand Motions for Lower Limb Prostheses. Current Signal Transduction Therapy, 17(1). 
     URL: https://doi.org/10.2174/1574362416666210618113305


676. Sharma, K., & Kumar, A. (2022). Investigation of compaction, specific gravity, unconfined compressive strength and cbr of a composite having copper slag and rice husk ash mixed using an alkali activator. Innovative Infrastructure Solutions, 7(2). 
     URL: https://doi.org/10.1007/s41062-022-00783-2


677. Singh, R., & Patel, M. (2022). Effective utilization of rice straw in value-added by-products: A systematic review of state of art and future perspectives. Biomass and Bioenergy, 159. 
     URL: https://doi.org/10.1016/j.biombioe.2022.106411


678. Thakur, A., Senthil, K., & Singh, A. P. (2022). Experimental investigation on crumb rubber based concrete bricks along with polypropylene and steel fibers. Asian Journal of Civil Engineering, 23(3), 357–374. 
     URL: https://doi.org/10.1007/s42107-022-00428-w


679. Kaur, G., Khushboo, & Malik, P. (2022). Mesomorphic, electro-optic and dielectric behavior of self-assembled nanocomposite materials: Nematic mixture doped with carbon coated cobalt nanoparticles. Journal of Molecular Liquids, 351. 
     URL: https://doi.org/10.1016/j.molliq.2022.118639


680. Singh, V., Amirchand, K. D., & Gardas, R. L. (2022). Ionic liquid-nanoparticle based hybrid systems for energy conversion and energy storage applications. Journal of the Taiwan Institute of Chemical Engineers, 133. 
     URL: https://doi.org/10.1016/j.jtice.2022.104237


681. Kaur, G., Kumar, H., & Singla, M. (2022). Diverse applications of ionic liquids: A comprehensive review. Journal of Molecular Liquids, 351. 
     URL: https://doi.org/10.1016/j.molliq.2022.118556


682. Goyal, K. K., Sharma, N., Gupta, R. D., Gupta, S., Rani, D., Kumar, D., & Sharma, V. S. (2022). Measurement of performance characteristics of WEDM while processing AZ31 Mg-alloy using Levy flight MOGWO for orthopedic application. International Journal of Advanced Manufacturing Technology, 119(11–12), 7175–7197. 
     URL: https://doi.org/10.1007/s00170-021-08358-8


683. Goyal, N., Kumar, A., Popli, R., Awasthi, L. K., Sharma, N., & Sharma, G. (2022). Priority based data gathering using multiple mobile sinks in cluster based UWSNs for oil pipeline leakage detection. Cluster Computing, 25(2), 1341–1354. 
     URL: https://doi.org/10.1007/s10586-021-03513-y


684. Kumar, A., Sharma, S., Mehra, R., Mishra, R., Taloor, A. K., & Bhattacharya, P. (2022). Assessment of natural radioactivity levels in the Lesser Himalayas of the Jammu and Kashmir, India. Journal of Radioanalytical and Nuclear Chemistry, 331(4), 1907–1921. 
     URL: https://doi.org/10.1007/s10967-021-08164-2


685. Kumar, R., Mitra, A., & Srinivas, T. (2022). Role of nano-additives in the thermal management of lithium-ion batteries: A review. Journal of Energy Storage, 48. 
     URL: https://doi.org/10.1016/j.est.2022.104059


686. Thakur, A., Mehlwal, S., Minhas, N., & Sharma, V. (2022). Influence of tool rotational speed on the microstructural characterization and mechanical properties of friction stir welded Al-Si10Mg parts produced by DMLS additive manufacturing process. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 278. 
     URL: https://doi.org/10.1016/j.mseb.2022.115612


687. Sharma, A., Pitchumani, R., & Chauhan, R. (2022). Solar air heating systems with latent heat storage - A review of state-of-the-art. Journal of Energy Storage, 48. 
     URL: https://doi.org/10.1016/j.est.2022.104013


688. Rani, S., Kansal, S., Singla, A. K., Nazir, S., & Mehra, R. (2022). A comprehensive study of exhalation rates in soil samples to understand the high-risk potential area in Barnala and Moga districts of Punjab, India. Journal of Radioanalytical and Nuclear Chemistry. 
     URL: https://doi.org/10.1007/s10967-021-08129-5


689. Kumar, G., Bhadwal, R., Kumar, M., Kumari, P., Kumar, A., Walia, V., Mehra, R., & Goyal, A. (2022). Radioactivity monitoring in the vicinity of Jawalamukhi thrust NW Himalaya, India for tectonic study. Natural Hazards, 111(3), 2219–2240. 
     URL: https://doi.org/10.1007/s11069-021-05134-5


690. Sharma, V., Thakur, V., Singh, A., & Kant, N. (2022). Third harmonic generation of a relativistic self-focusing laser in plasma under exponential density ramp. Zeitschrift Fur Naturforschung - Section A Journal of Physical Sciences, 77(4), 323–328. 
     URL: https://doi.org/10.1515/zna-2021-0266


691. Kumar, S. (2022). Subject’s thermal adaptation in different built environments: An analysis of updated metadata-base of thermal comfort data in India. Journal of Building Engineering, 46. 
     URL: https://doi.org/10.1016/j.jobe.2021.103844


692. Choudhary, A., Kumar, S., Sharma, M., & Sharma, K. P. (2022). A Framework for Data Prediction and Forecasting in WSN with Auto ARIMA. Wireless Personal Communications, 123(3), 2245–2259. 
     URL: https://doi.org/10.1007/s11277-021-09237-x


693. Ahamad, N., Sikander, A., & Singh, G. (2022). Order diminution and its application in controller design using salp swarm optimization technique. International Journal of System Assurance Engineering and Management, 13(2), 933–943. 
     URL: https://doi.org/10.1007/s13198-021-01367-6


694. Nandan, A. S., Singh, S., Kumar, R., & Kumar, N. (2022). An Optimized Genetic Algorithm for Cluster Head Election Based on Movable Sinks and Adjustable Sensing Ranges in IoT-Based HWSNs. IEEE Internet of Things Journal, 9(7), 5027–5039. 
     URL: https://doi.org/10.1109/JIOT.2021.3107295


695. Singh, N., Nassar, R.-U.-D., Shehnazdeep, K., & Anjani, B. (2022). Microstructural characteristics and carbonation resistance of coal bottom ash based concrete mixtures. Magazine of Concrete Research, 74(7), 364–378. 
     URL: https://doi.org/10.1680/jmacr.20.00125


696. Panchal, D., Chatterjee, P., Pamucar, D., & Yazdani, M. (2022). A novel fuzzy-based structured framework for sustainable operation and environmental friendly production in coal-fired power industry. International Journal of Intelligent Systems, 37(4), 2706–2738. 
     URL: https://doi.org/10.1002/int.22507


697. Kumar, P., Gupta, M., Singh, K., & Kumar, N. (2022). Linearity Analysis of MoTe2-FET based Single Transistor AND Gate Using Non-Equilibrium Green’s Function. Transactions on Electrical and Electronic Materials, 23(2), 164–170. 
     URL: https://doi.org/10.1007/s42341-021-00336-x


698. Basak, N., Jana, A. K., & Das, D. (2022). Photofermentative biohydrogen generation from organic acids by Rhodobacter sphaeroides O.U.001: Computational fluid dynamics modeling of hydrodynamics and temperature. Biotechnology and Applied Biochemistry, 69(2), 783–797. 
     URL: https://doi.org/10.1002/bab.2151


699. Mathur, A., & Kumar, S. (2022). Thermal performance and comfort assessment of U-shape and helical shape earth-air heat exchanger in India. Energy and Built Environment, 3(2), 171–180. 
     URL: https://doi.org/10.1016/j.enbenv.2021.01.002


700. Kaur, S., Mehra, R., & Kumar, M. R. (2022). Quantification of health risks and spatial distribution of heavy metals in groundwater of Lower Himalayas, India. International Journal of Environmental Science and Technology, 19(4), 3201–3218. 
     URL: https://doi.org/10.1007/s13762-021-03258-6


701. Sharma, R., Rana, A. K., Kaushal, S., King, J. B., & Raman, A. (2022). Analysis of Underlap Strained Silicon on Insulator MOSFET for Accurate and Compact Modeling. Silicon, 14(6), 2793–2801. 
     URL: https://doi.org/10.1007/s12633-021-01059-7


702. Singh, S., & Raj, B. (2022). Analytical and Compact Modeling Analysis of a SiGe Hetero-Material Vertical L-Shaped TFET. Silicon, 14(5), 2135–2145. 
     URL: https://doi.org/10.1007/s12633-021-01009-3


703. Wadhwa, G., & Raj, B. (2022). Surface Potential Modeling and Simulation Analysis of Dopingless TFET Biosensor. Silicon, 14(5), 2147–2156. 
     URL: https://doi.org/10.1007/s12633-021-01011-9


704. Hernández-Verón, M. A., Martínez, E., & Singh, S. (2022). A reliable treatment to solve nonlinear Fredholm integral equations with non-separable kernel. Journal of Computational and Applied Mathematics, 404. 
     URL: https://doi.org/10.1016/j.cam.2020.113115


705. Khushbu, & Jindal, R. (2022). Cyclodextrin mediated controlled release of edaravone from pH-responsive sodium alginate and chitosan based nanocomposites. International Journal of Biological Macromolecules, 202, 11–25. 
     URL: https://doi.org/10.1016/j.ijbiomac.2022.01.001


706. Chopra, A., Sachdeva, A., & Bhardwaj, A. (2022). Selection of appropriate maintenance strategy using fuzzy VIKOR technique: application in paper industry. International Journal of Quality and Reliability Management, 39(5), 1226–1248. 
     URL: https://doi.org/10.1108/IJQRM-03-2020-0070


707. Singh, S. (2022). Utilising fractional porous interface for high thermal performance of serpentine wavy channel solar air heater. Applied Thermal Engineering, 205. 
     URL: https://doi.org/10.1016/j.applthermaleng.2022.118044


708. Gupta, P. P., Kalkhambkar, V., Sharma, K. C., Jain, P., & Bhakar, R. (2022). Optimal electric vehicles charging scheduling for energy and reserve markets considering wind uncertainty and generator contingency. International Journal of Energy Research, 46(4), 4516–4539. 
     URL: https://doi.org/10.1002/er.7446


709. Mohanty, A., Mankoti, M., Rout, P. R., Meena, S. S., Dewan, S., Kalia, B., Varjani, S., Wong, J. W. C., & Banu, J. R. (2022). Sustainable utilization of food waste for bioenergy production: A step towards circular bioeconomy. International Journal of Food Microbiology, 365. 
     URL: https://doi.org/10.1016/j.ijfoodmicro.2022.109538


710. Girdhar, A., Ashokan, V., Drummond, N. D., Morawetz, K., & Pathak, K. N. (2022). Electron correlation and confinement effects in quasi-one-dimensional quantum wires at high density. Physical Review B, 105(11). 
     URL: https://doi.org/10.1103/PhysRevB.105.115140


711. Bala, M., & Singh, V. (2022). Self-Moving blooming drops of dimethyl sulfoxide containing benzyne intermediate for solutal transport. Journal of Molecular Liquids, 350. 
     URL: https://doi.org/10.1016/j.molliq.2022.118514


712. Sodhi, V., Bansal, A., & Jha, M. K. (2022). Effect of extracellular polymeric compositions on in-situ sludge minimization performance of upgraded activated sludge treatment for industrial wastewater. Journal of Environmental Management, 306. 
     URL: https://doi.org/10.1016/j.jenvman.2022.114516


713. Sharma, A., Singh, P., & Kapoor, K. (2022). Utilization of recycled fine powder as an activator in fly ash based geopolymer mortar. Construction and Building Materials, 323. 
     URL: https://doi.org/10.1016/j.conbuildmat.2022.126581


714. Shaw, V. P., & Mukhopadhyay, A. (2022). Impact of abrasion on strength, elasticity and elastic recovery properties of stretch-denim fabric. International Journal of Clothing Science and Technology, 34(2), 241–261. 
     URL: https://doi.org/10.1108/IJCST-12-2020-0205


715. Banik, S., Sharma, N., Mangla, M., Mohanty, S. N., & Shitharth, S. (2022). LSTM based decision support system for swing trading in stock market. Knowledge-Based Systems, 239. 
     URL: https://doi.org/10.1016/j.knosys.2021.107994


716. Karthik, P., Sharma, S. K., & Akbar, M. A. (2022). Evolving live load criteria in bridge design code guidelines – A case study of India based on IRC 6. In Structural Monitoring and Maintenance (Vol. 9, Issue 1, pp. 43–57). 
     URL: https://doi.org/10.12989/smm.2022.9.1.043


717. Arya, R. K., & Verros, G. D. (2022). On the Validity of Onsager Reciprocal Relations (ORR) for Heat Transfer in Anisotropic Solids. In Axioms (Vol. 11, Issue 3). 
     URL: https://doi.org/10.3390/axioms11030104


718. Chakraborty, J. N., Anchal, & Kamboj, A. (2022). Integration of wearable triboelectric nanogenerators with textiles. In Asian Textile Journal (Vol. 31, Issues 3–4, pp. 31–41). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85129294789&partnerID=40&md5=5221fcc0ff4cf105797979eccd3acd41


719. Kumar, V., Verma, R., Chauhan, K., & Kumar, R. (2022). Influence of laser texturing pre-treatment on HVOF-sprayed WC-10Co-4Cr+GNP coatings on AISI 304. Surface Topography: Metrology and Properties, 10(1). 
     URL: https://doi.org/10.1088/2051-672X/ac5c68


720. Midha, V. K., Joshi, S., & Dakuri, A. (2022). Surgical gown fabrics in infection control and comfort measures at hospitals. Indian Journal of Fibre and Textile Research, 47(1), 96–104. 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85127722288&partnerID=40&md5=e4be6a26abf9484f23bf9b603ec0c824


721. Sikka, M. P., Rao, S. V. S., & Garg, S. (2022). Silk biomaterial for skeletal tissue engineering. Indian Journal of Fibre and Textile Research, 47(1), 70–77. 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85127721618&partnerID=40&md5=ac37ccdc71983837d2cbdaecc5764b01


722. Kaur, G., Singh, S., Rani, R., Kumar, R., & Malik, A. (2022). High-quality reversible data hiding scheme using sorting and enhanced pairwise PEE. IET Image Processing, 16(4), 1096–1110. 
     URL: https://doi.org/10.1049/ipr2.12212


723. Dubey, K., Sharma, S. C., & Kumar, M. (2022). A Secure IoT Applications Allocation Framework for Integrated Fog-Cloud Environment. Journal of Grid Computing, 20(1). 
     URL: https://doi.org/10.1007/s10723-021-09591-x


724. Sheoran, M., Chandra, A., Gautam, A. K., Arya, R. K., Bhunia, H., & Pant, H. J. (2022). Comparative Study of Two Identical Industrial Digesters Using Radiotracer-Based Residence Time Distribution Measurement. Chemical Engineering and Technology, 45(3), 479–488. 
     URL: https://doi.org/10.1002/ceat.202100429


725. Tewari, K., Shukla, S., & Arya, R. K. (2022). Heat Exchanger Network Design Using MATLAB. Chemical Engineering and Technology, 45(3), 508–516. 
     URL: https://doi.org/10.1002/ceat.202100543


726. Pachauri, N., Yadav, D., Sharma, T. K., Verma, O. P., & Ahn, C. W. (2022). Closed loop fractional order drug delivery control scheme for chemotherapy. Results in Control and Optimization, 6. 
     URL: https://doi.org/10.1016/j.rico.2022.100097


727. Ahmed, S., Akram, M. Y., Kumar, A., Dhir, A., Ali, Z., Kansal, S. K., & Ratan, J. K. (2022). Development of magnesium oxide@carbon fiber paper composite film for the removal of methyl orange from aqueous phase. Nanotechnology for Environmental Engineering, 7(1). 
     URL: https://doi.org/10.1007/s41204-021-00181-6


728. Bedi, A. K., & Sunkaria, R. K. (2022). Statistical recursive minimum cross entropy for ultrasound image segmentation. Multimedia Tools and Applications, 81(6), 7873–7893. 
     URL: https://doi.org/10.1007/s11042-022-12050-8


729. Priya, Sharma, A. K., Kaith, B. S., Arora, S., Simran, & Bhagyashree. (2022). Synthesis of gelatin and green tea based stretchable self-healing material of biomedical importance. Reactive and Functional Polymers, 172. 
     URL: https://doi.org/10.1016/j.reactfunctpolym.2022.105188


730. Arif, M., Kango, S., & Shukla, D. K. (2022). Effect of slip boundary condition and non-newtonian rheology of lubricants on the dynamic characteristics of finite hydrodynamic journal bearing. Surface Topography: Metrology and Properties, 10(1). 
     URL: https://doi.org/10.1088/2051-672X/ac4403


731. Pati, S., Verma, O. P., Arya, R. K., & Tiwari, A. K. (2022). Transient Modeling and Simulation of a Multiple-Stage Evaporator in the Paper Industry. Chemical Engineering and Technology, 45(3), 456–466. 
     URL: https://doi.org/10.1002/ceat.202100387


732. Pal, S., Bhadauria, S. S., & Kumar, P. (2022). Corrosion Pit to Crack Transition Behavior of 304 Stainless Steel in a Chloride Solution. Journal of Bio- and Tribo-Corrosion, 8(1). 
     URL: https://doi.org/10.1007/s40735-022-00633-9


733. Kaur, G., Kumar, H., & Singla, M. (2022). Mixed micellization behavior of 1-dodecyl-3-methylimidazolium chloride [C12mim][Cl] and benzyldimethyl-n-hexadecylammonium chloride (16-BAC) under the influence of gelatin in aqueous media. Journal of Molecular Liquids, 349. 
     URL: https://doi.org/10.1016/j.molliq.2022.118479


734. Baig, F., Jaswal, V., Rangan, K., Khullar, S., Markad, D., & Sarkar, M. (2022). Positional effects of a pyridyl group in Zn(II) coordination polymers on the selective dye adsorption properties. Polyhedron, 214. 
     URL: https://doi.org/10.1016/j.poly.2021.115646


735. Kumar, S., & Sikander, A. (2022). Optimum Mobile Robot Path Planning Using Improved Artificial Bee Colony Algorithm and Evolutionary Programming. Arabian Journal for Science and Engineering, 47(3), 3519–3539. 
     URL: https://doi.org/10.1007/s13369-021-06326-8


736. Gautam, N., Garg, S., & Yadav, S. (2022). Development of Flexible and Thin Films from Underutilized Indian Finger Millet (Eleusine coracana) Starch. Starch/Staerke, 74(3–4). 
     URL: https://doi.org/10.1002/star.202100156


737. Keshu, Rani, M., & Shanker, U. (2022). Efficient removal of plastic additives by sunlight active titanium dioxide decorated Cd–Mg ferrite nanocomposite: Green synthesis, kinetics and photoactivity. Chemosphere, 290. 
     URL: https://doi.org/10.1016/j.chemosphere.2021.133307


738. Tyagi, P. K., Kumar, R., & Said, Z. (2022). Recent advances on the role of nanomaterials for improving the performance of photovoltaic thermal systems: Trends, challenges and prospective. Nano Energy, 93. 
     URL: https://doi.org/10.1016/j.nanoen.2021.106834


739. Verma, G., Singh, S., Chander, S., & Dhiman, P. (2022). Numerical investigation on transient thermal performance predictions of phase change material embedded solar air heater. Journal of Energy Storage, 47. 
     URL: https://doi.org/10.1016/j.est.2021.103619


740. Kumar, R. (2022). Fuzzy particle swarm optimization control algorithm implementation in photovoltaic integrated shunt active power filter for power quality improvement using hardware-in-the-loop. Sustainable Energy Technologies and Assessments, 50. 
     URL: https://doi.org/10.1016/j.seta.2021.101820


741. Pratibha, & Kaur Rajput, J. (2022). Nanoaggregation-induced emission enhanced characteristics of novel anthracene-appended pyrimidinone/thione derivatives in H2O-DMF medium. Journal of Molecular Liquids, 349. 
     URL: https://doi.org/10.1016/j.molliq.2021.118135


742. Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022). Artificial Intelligence Applications for Industry 4.0: A Literature-Based Study. In Journal of Industrial Integration and Management (Vol. 7, Issue 1, pp. 83–111). 
     URL: https://doi.org/10.1142/S2424862221300040


743. Behera, L. (2022). A fault-tolerant time-triggered scheduling algorithm of mixed-criticality systems. Computing, 104(3), 577–599. 
     URL: https://doi.org/10.1007/s00607-021-01026-5


744. Bisht, R., & Sikander, A. (2022). A New Soft Computing-Based Parameter Estimation of Solar Photovoltaic System. Arabian Journal for Science and Engineering, 47(3), 3341–3353. 
     URL: https://doi.org/10.1007/s13369-021-06209-y


745. Ranjan, R., Kashyap, N., & Raman, A. (2022). Effects of gate width variation on the performance of Normally-OFF dual-recessed gate MIS AlGaN/GaN HEMT. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 35(2). 
     URL: https://doi.org/10.1002/jnm.2960


746. Ahmad, A., & Singh, J. (2022). Influence of Processes of Change on Stages of Change for Smoking Cessation. Journal of Applied Social Science, 16(1), 209–222. 
     URL: https://doi.org/10.1177/19367244211036994


747. Kasilingam, S., Sethi, M., Pelecanos, L., & Gupta, N. K. (2022). Mitigation strategies of underground tunnels against blast loading. International Journal of Protective Structures, 13(1), 21–44. 
     URL: https://doi.org/10.1177/20414196211038018


748. Singh, J., & Kaur, R. (2022). Factors Influencing the Attitude Toward Anti-Littering Behavior. Journal of Applied Social Science, 16(1), 88–106. 
     URL: https://doi.org/10.1177/19367244211015877


749. Kataria, R., Singh, R. P., Alkawaz, M. H., & Jha, K. (2022). Optimization and neural modelling of infiltration rate in ultrasonic machining. OPSEARCH, 59(1), 146–165. 
     URL: https://doi.org/10.1007/s12597-021-00534-4


750. Singh, R. (2022). Descent of properties of rings and pairs of rings to fixed rings. Beitrage Zur Algebra Und Geometrie, 63(1), 179–187. 
     URL: https://doi.org/10.1007/s13366-021-00566-3


751. Bala, I., & Yadav, A. (2022). Niching comprehensive learning gravitational search algorithm for multimodal optimization problems. Evolutionary Intelligence, 15(1), 695–721. 
     URL: https://doi.org/10.1007/s12065-020-00547-w


752. Mohanty, A., Rout, P. R., Dubey, B., Meena, S. S., Pal, P., & Goel, M. (2022). A critical review on biogas production from edible and non-edible oil cakes. Biomass Conversion and Biorefinery, 12(3), 949–966. 
     URL: https://doi.org/10.1007/s13399-021-01292-5


753. Mahindru, A., & Sangal, A. L. (2022). SOMDROID: android malware detection by artificial neural network trained using unsupervised learning. Evolutionary Intelligence, 15(1), 407–437. 
     URL: https://doi.org/10.1007/s12065-020-00518-1


754. Sharma, A., Bahl, S., Bagha, A. K., Javaid, M., Shukla, D. K., & Haleem, A. (2022). Blockchain technology and its applications to combat COVID-19 pandemic. Research on Biomedical Engineering, 38(1), 173–180. 
     URL: https://doi.org/10.1007/s42600-020-00106-3


755. Sinha, R. R., Dhingra, H., & Thakur, P. (2022). Estimation of Ratio of Two Means Using Regression-Cum-Exponential Estimators in the Presence of Non-response. Proceedings of the National Academy of Sciences India Section A - Physical Sciences, 92(1), 57–64. 
     URL: https://doi.org/10.1007/s40010-020-00690-0


756. Kumar, K., Suri, B., & Wadhwa, B. (2022). A report on the fifth workshop on software engineering education (SEED 2022). ACM International Conference Proceeding Series. 
     URL: https://doi.org/10.1145/3511430.3511467


757. Baig, F., Rangan, K., Khullar, S., & Sarkar, M. (2022). Structural analysis of bis(pyridyl)diimines: Factors affecting the molecular geometry and supramolecular packing. Journal of Molecular Structure, 1250. 
     URL: https://doi.org/10.1016/j.molstruc.2021.131830


758. Agarwal, V., Gupta, V., Bhardwaj, V. K., Singh, K., Khullar, P., & Bakshi, M. S. (2022). Hemolytic Response of Iron Oxide Magnetic Nanoparticles at the Interface and in Bulk: Extraction of Blood Cells by Magnetic Nanoparticles. ACS Applied Materials and Interfaces, 14(5), 6428–6441. 
     URL: https://doi.org/10.1021/acsami.1c23496


759. Malik, P., Sharma, D., & Jajpura, L. (2022). Photocatalytic and self-cleaning applications of textiles. In Asian Dyer (Vol. 19, Issue 1, pp. 30–36). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85134310236&partnerID=40&md5=db353ab3ea1f3fcc826d916c532c28df


760. Kumar, R., & Kumar, A. (2022). η mesons in hot magnetized nuclear matter. Chinese Physics C, 46(2). 
     URL: https://doi.org/10.1088/1674-1137/ac3bc7


761. Ijardar, S. P., Singh, V., & Gardas, R. L. (2022). Revisiting the Physicochemical Properties and Applications of Deep Eutectic Solvents. Molecules, 27(4). 
     URL: https://doi.org/10.3390/molecules27041368


762. Kumawat, M., Thapliyal, D., Verros, G. D., Arya, R. K., Barman, S., Halder, G., & Shandilya, P. (2022). PANI-Based Hydrogen Sulfide Gas Sensors. Coatings, 12(2). 
     URL: https://doi.org/10.3390/coatings12020186


763. Goel, A., Manik, G., & Verma, O. P. (2022). Combinatorial and geometric optimization of a parabolic trough solar collector. Korean Journal of Chemical Engineering, 39(2), 284–305. 
     URL: https://doi.org/10.1007/s11814-021-0939-5


764. Tripathi, S., Srivastava, A., Raman, A., & Tripathi, S. (2022). CuO/Pentacene Type-II Planar Heterojunction for UV-Vis-NIR Photodetection with High EQE. IEEE Transactions on Electron Devices, 69(2), 722–728. 
     URL: https://doi.org/10.1109/TED.2021.3137374


765. Singh, M., Jamra., R., Paul, A. K., Malakar, C. C., & Singh, V. (2022). KI-assisted Sulfur Activation/Insertion/Denitration Strategy towards Dual C−S Bond Formation for One-pot Synthesis of β-Carboline-tethered 2-Acylbenzothiophenes. Asian Journal of Organic Chemistry, 11(2). 
     URL: https://doi.org/10.1002/ajoc.202100653


766. Kothiyal, N. C., Kumar, V., Kumar, N., Saruchi, Pandey, S., & Ansar, S. (2022). Reduction of carcinogenic PAHs from petrodiesel engine exhaust by blending of green diesel (A new development in renewable fuels) with different biodiesel fuels. Environmental Technology and Innovation, 25. 
     URL: https://doi.org/10.1016/j.eti.2021.102089


767. Shankhwar, V., Singh, D., & Deepak, K. K. (2022). Cardiac-vascular-respiratory coupling analysis during 6-degree head-down tilt microgravity analogue. Biomedical Signal Processing and Control, 72. 
     URL: https://doi.org/10.1016/j.bspc.2021.103358


768. Pooja, Veer, K., & Pahuja, S. K. (2022). Gender based assessment of gait rhythms during dual-task in Parkinson’s disease and its early detection. Biomedical Signal Processing and Control, 72. 
     URL: https://doi.org/10.1016/j.bspc.2021.103346


769. Gaba, R., Devi, S., Pal, A., Sharma, D., & Kumar, H. (2022). Solvation properties of l-lysine and l-arginine in aqueous solutions of 1-heptyl-3-methyl imidazolium tetrafluoroborate [C7mim][BF4]at different temperatures. Journal of Molecular Liquids, 347. 
     URL: https://doi.org/10.1016/j.molliq.2021.117996


770. Singh, H., Singh, P., Singh, F., Singh, A. P., Kumar, A., & Thakur, A. (2022). Swift heavy ion irradiation induced microstructural transformation in selenium thin films. Radiation Physics and Chemistry, 191. 
     URL: https://doi.org/10.1016/j.radphyschem.2021.109863


771. Shankhwar, V., Singh, D., & Deepak, K. K. (2022). Effect of countermeasure bodygear on cardiac-vascular-respiratory coupling during 6-degree head-down tilt: An earth-based microgravity study. Life Sciences in Space Research, 32, 45–53. 
     URL: https://doi.org/10.1016/j.lssr.2021.10.004


772. Rathi, A., Barman, S., Basu, S., & Arya, R. K. (2022). Post-fabrication structural changes and enhanced photodegradation activity of semiconductors@zeolite composites towards noxious contaminants. Chemosphere, 288. 
     URL: https://doi.org/10.1016/j.chemosphere.2021.132609


773. Saini, B. S., & Singh, S. P. (2022). Estimation of flexural fatigue strength of self-compacting concrete made with coarse recycled concrete aggregates. Innovative Infrastructure Solutions, 7(1). 
     URL: https://doi.org/10.1007/s41062-021-00606-w


774. Mahajan, T., Rupali, S., & Mohanty, A. (2022). Environmental concern, leachability and leaching modelling of fly ash and microbes: State-of-the-art review. Innovative Infrastructure Solutions, 7(1). 
     URL: https://doi.org/10.1007/s41062-021-00619-5


775. Ahamad, N., Sikander, A., & Singh, G. (2022). A Novel Reduction Approach for Linear System Approximation. Circuits, Systems, and Signal Processing, 41(2), 700–724. 
     URL: https://doi.org/10.1007/s00034-021-01816-4


776. Kaur, S., Kumar, B., Chakraborty, P., Kumar, V., & Kothiyal, N. C. (2022). Polycyclic aromatic hydrocarbons in PM10 of a north-western city, India: distribution, sources, toxicity and health risk assessment. International Journal of Environmental Science and Technology, 19(2), 1041–1056. 
     URL: https://doi.org/10.1007/s13762-021-03450-8


777. Singh, S., & Raman, A. (2022). Design of Dopingless GaN Nanowire FET with Low ‘Q’ for High Switching and RF Applications. Silicon, 14(3), 1297–1307. 
     URL: https://doi.org/10.1007/s12633-020-00912-5


778. Gupta, A. K., & Raman, A. (2022). Performance Enhancement and Signal Distortion Analysis of Virtually Doped Nanotube Tunnel FET with Embedded Ferroelectric Gate Oxide. Silicon, 14(3), 1147–1158. 
     URL: https://doi.org/10.1007/s12633-020-00882-8


779. Alam, S., Raman, A., Raj, B., Kumar, N., & Singh, S. (2022). Design and Analysis of Gate Overlapped/Underlapped NWFET Based Lable Free Biosensor. Silicon, 14(3), 989–996. 
     URL: https://doi.org/10.1007/s12633-020-00880-w


780. Kaur, S., & Mehra, R. (2022). Dosimetric impact of natural terrestrial radioactivity on residents of lower Himalayas, India. Environmental Geochemistry and Health, 44(2), 603–629. 
     URL: https://doi.org/10.1007/s10653-020-00748-3


781. Kumar, D., Bansal, U., Alroobaea, R. S., Baqasah, A. M., & Hedabou, M. (2022). An Artificial Intelligence Approach for Expurgating Edible and Non-Edible Items. Frontiers in Public Health, 9. 
     URL: https://doi.org/10.3389/fpubh.2021.825468


782. Pati, S., & Verma, O. P. (2022). Integration of solar field with multiple stage evaporator to sustain eco-energy in pulp and paper plant. Journal of Cleaner Production, 333. 
     URL: https://doi.org/10.1016/j.jclepro.2021.130148


783. Rani, M., Keshu, & Shanker, U. (2022). Cu-based nanomaterials for production of novel agrochemicals. In Copper Nanostructures: Next-Generation of Agrochemicals for Sustainable Agroecosystems. 
     URL: https://doi.org/10.1016/B978-0-12-823833-2.00018-0


784. Pati, S., & Verma, O. P. (2022). Energy integration of solar assisted Multiple Stage Evaporator and optimum parameter selection. Energy, 239. 
     URL: https://doi.org/10.1016/j.energy.2021.122162


785. Das, I., Panchal, D., & Tyagi, M. (2022). A novel PFMEA-Doubly TOPSIS approach-based decision support system for risk analysis in milk process industry. International Journal of Quality and Reliability Management, 39(1), 1–29. 
     URL: https://doi.org/10.1108/IJQRM-10-2019-0320


786. Bisht, R., & Sikander, A. (2022). A novel way of parameter estimation of solar photovoltaic system. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 41(1), 471–498. 
     URL: https://doi.org/10.1108/COMPEL-05-2021-0166


787. Thakur, A., Senthil, K., & Singh, A. P. (2022). Evaluation of concrete bricks with crumb rubber and polypropylene fibres under impact loading. Construction and Building Materials, 315. 
     URL: https://doi.org/10.1016/j.conbuildmat.2021.125752


788. Kumar, N., Tyagi, M., & Sachdeva, A. (2022). Depiction of possible solutions to improve the cold supply chain performance system. Journal of Advances in Management Research, 19(1), 106–138. 
     URL: https://doi.org/10.1108/JAMR-10-2020-0285


789. Bhambri, H., Khullar, S., Sakshi, & Mandal, S. K. (2022). Nitrogen-rich covalent organic frameworks: A promising class of sensory materials. Materials Advances, 3(1), 19–124. 
     URL: https://doi.org/10.1039/d1ma00506e


790. Arora, S., Talwar, D., Chetal, M., Bhardwaj, V. K., Dawar, A., Sidhu, H., Kashyap, S., & Capalash, N. (2022). Binding of periodate by non–covalent interaction: Synthesis, characterization, single crystal structure determination, antibacterial and anticancer studies of [Co(bpy)2CO3].IO4. Journal of Molecular Structure, 1247. 
     URL: https://doi.org/10.1016/j.molstruc.2021.131279


791. Pooja, Pahuja, S. K., & Veer, K. (2022). Recent Approaches on Classification and Feature Extraction of EEG Signal: A Review. Robotica, 40(1), 77–101. 
     URL: https://doi.org/10.1017/S0263574721000382


792. Chand, R., Sharma, V. S., Trehan, R., Gupta, M. K., & Sarikaya, M. (2022). Investigating the Dimensional Accuracy and Surface Roughness for 3D Printed Parts Using a Multi-jet Printer. In Journal of Materials Engineering and Performance. 
     URL: https://doi.org/10.1007/s11665-022-07153-0


793. Kumar, V., Verma, R., Sharma, V. S., & Prasad, A. D. V. S. (2022). Investigations into Lattice Strain and Hardness of WC-10Co-4Cr Coating on Laser Surface Textured 420 Stainless Steel. In Lasers in Engineering (Vol. 53, Issues 3–4, pp. 231–252). 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85134659410&partnerID=40&md5=16e960ae1bd109bc53ec6d08a215a0fc


794. Ranjan, R., Kashyap, N., & Raman, A. (2022). Demonstration of Temperature-Dependent Analysis of GAA–β-(AlGa)2O3/Ga2O3 High Electron Mobility Transistor. In IETE Journal of Research. 
     URL: https://doi.org/10.1080/03772063.2022.2098185


795. Kaur, J., Basu, R., & Sharma, A. K. (2022). Design and Analysis of Si1-x-yGeySnx-Si1-xGex Alloy Based Solar Cell Emphasizing on Ge Composition 15%. In Silicon. 
     URL: https://doi.org/10.1007/s12633-022-02025-7


796. Sharma, N., Sharma, K. P., Mangla, M., & Rani, R. (2022). Breast cancer classification using snapshot ensemble deep learning model and t-distributed stochastic neighbor embedding. In Multimedia Tools and Applications. 
     URL: https://doi.org/10.1007/s11042-022-13419-5


797. Singh, V., Kukreja, R., & Sehgal, S. S. (2022). Frictional pressure drop correlation for condensation of refrigerants in microchannel heat exchangers. In Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Vol. 44, Issue 3, pp. 6568–6580). 
     URL: https://doi.org/10.1080/15567036.2022.2100520


798. Kaur, K., Khushbu, Vaid, V., Anupama, Anshul, Ankush, & Jindal, R. (2022). Efficient removal of Rose Bengal and Malachite Green dyes using Green and sustainable Chitosan/CMC/Bentonite-based hydrogel materials. In Polymer Bulletin. 
     URL: https://doi.org/10.1007/s00289-022-04378-w


799. Sharma, S., Prakash, G., & Singh, K. (2022). Workplace incivility: an organisational perspective towards expats turnover. In International Journal of Business Innovation and Research (Vol. 28, Issue 3, pp. 281–295). 
     URL: https://doi.org/10.1504/IJBIR.2022.124122


800. Kaur, S., & Rani, R. (2022). Image Forgery Detection Using Multi-Layer Convolutional Neural Network (Vol. 858, pp. 855–866). 
     URL: https://doi.org/10.1007/978-981-19-0840-8_66


801. Samriya, J. K., Kumar, M., Ganzha, M., Paprzycki, M., Bolanowski, M., & Paszkiewicz, A. (2022). An Energy Aware Clustering Scheme for 5G-Enabled Edge Computing Based IoMT Framework: Vol. 13351 LNCS (pp. 169–176). 
     URL: https://doi.org/10.1007/978-3-031-08754-7_23


802. Phanden, R. K., Chaudhary, T., Srivastava, P., Sharma, S. K., Gahlot, P., & Goyal, K. K. (2022). Design of a Robotic Arm equipped Fully Automated Burger Assembly Machine. 
     URL: https://doi.org/10.1109/ICAECT54875.2022.9807651


803. Shelatkar, T., Urvashi, D., Shorfuzzaman, M., Alsufyani, A., & Lakshmanna, K. (2022). Diagnosis of Brain Tumor Using Light Weight Deep Learning Model with Fine-Tuning Approach. In Computational and Mathematical Methods in Medicine (Vol. 2022). 
     URL: https://doi.org/10.1155/2022/2858845


804. Singh, S., & Kukreja, R. (2022). Experimental study on effect of enhanced surfaces and inclined mode on spray cooling heat transfer performance using HFE-649 coolant. In Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Vol. 44, Issue 3, pp. 6537–6555). 
     URL: https://doi.org/10.1080/15567036.2022.2100516


805. Kumar, A., Kumar, A., Pandey, A., Sahu, S., Kumar, N., & Singh, R. P. (2022). Analysing the compressive behaviour of different PLA scaffolds fabricated through FFF process. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2093005


806. Singh, R., Singh, R. P., & Trehan, R. (2022). Surface integrity and accuracy based aspects in EDM of Cu-based SMA: an experimental investigation with microstructural analysis. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2099655


807. Saxena, A., & Tangellapalli, S. (2022). Performance analysis of solar-powered integrated desalination and air conditioning system. In Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Vol. 44, Issue 3, pp. 6281–6302). 
     URL: https://doi.org/10.1080/15567036.2022.2097338


808. Nayak, A. K., Chand Sharma, K., Bhakar, R., & Tiwari, H. (2022). Effect of High-Resolution Data Input on Wind Speed Prediction using Machine Learning Algorithms. 
     URL: https://doi.org/10.1109/ICEPE55035.2022.9798329


809. Singh, A. K., Chauhan, Y., & Sharma, N. (2022). Comparative performance analysis of intelligent controllers for solar tracking system. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.06.388


810. Ahlawat, S., Kaim, V., Kanaujia, B. K., Singh, N., Rambabu, K., Singh, S. P., & Lay-Ekuakille, A. (2022). Design and Performance Measurement of Implantable Differential Integrated Antenna for Wireless Biomedical Instrumentation Applications. In IEEE Transactions on Instrumentation and Measurement (Vol. 71). 
     URL: https://doi.org/10.1109/TIM.2022.3185622


811. Shankar, R., Srinivas, T., & Franco, W. R. G. (2022). Experimental investigation on cooling cogeneration plant for low temperature waste heat recovery process. In International Journal of Environment and Sustainable Development (Vol. 21, Issue 3, pp. 270–284). 
     URL: https://doi.org/10.1504/IJESD.2022.123923


812. Malik, P., Chauhan, G., Kumar, P., & Deep, A. (2022). Effect of polymer concentration on the electro-optical, dielectric and photoluminescence properties of confined ferroelectric liquid crystals composites. In Liquid Crystals. 
     URL: https://doi.org/10.1080/02678292.2022.2094006


813. Chaudhary, S., Dangi, S., Yadav, V., Walia, R. S., Suri, N. M., & Tyagi, M. (2022). Effect of preheating on the mechanical and high temperature tribological behaviour of reusing marble dust with aluminium composite. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2091091


814. Dubey, K., Sharma, S. C., Kumar, M., Kumar, P., & Nasr, A. A. (2022). A secured GA-WPC framework for scheduling the independent tasks in cloud environment. In Journal of Ambient Intelligence and Humanized Computing. 
     URL: https://doi.org/10.1007/s12652-022-04207-y


815. Painuly, M., Singh, R. P., & Trehan, R. (2022). In-house development of µ-ECM setup and its experimental validation. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2096834


816. Waghmare, S. N., Shelare, S. D., Bahl, S., Mungle, N., Kumar Bagha, A., & Chandmal Sharma, R. (2022). Structural design and its analysis of two station notching tool for industrial die. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.06.360


817. Verma, M. K., Kanaujia, B. K., Saini, J. P., & Verma, S. (2022). Stubbed microstrip-line fed broadband circularly polarized square slot antenna for WiMAX Applications. In Electromagnetics (Vol. 42, Issue 3, pp. 168–180). 
     URL: https://doi.org/10.1080/02726343.2022.2080872


818. Dhamija, L., & Garg, U. (2022). An adaptive randomized and secured approach against adversarial attacks. In Information Security Journal. 
     URL: https://doi.org/10.1080/19393555.2022.2088429


819. Singh, A. A., Harikrishnan, C. I., Tiwari, S. K., & Sharma, S. (2022). Investigation on Multi-entropy and Multi-statistical Features Fusion Approach for Fault Detection in Rolling Bearing Using VMD. In IETE Journal of Research. 
     URL: https://doi.org/10.1080/03772063.2022.2083707


820. Sharma, A., Pandher, J. S., & Prakash, G. (2022). Consumer confusion and decision postponement in the online tourism domain: the moderating role of self-efficacy. In Journal of Hospitality and Tourism Insights. 
     URL: https://doi.org/10.1108/JHTI-03-2022-0096


821. Sahu, D., Bahman, A., Dhurandher, B. K., Rai, A., & Gupta, R. R. (2022). Numerical studies on fire development inside the corridor. In International Journal of System Assurance Engineering and Management. 
     URL: https://doi.org/10.1007/s13198-022-01712-3


822. Chakraborty, A., Verma, A., Verma, P. K., & Verma, R. (2022). Performance Evaluation of a Hybrid-MAC Protocol for Small Sensor M2M Devices (Vol. 862, pp. 483–493). 
     URL: https://doi.org/10.1007/978-981-19-0252-9_44


823. Kumar Singaravel, D., Sharma, S., & Kumar, P. (2022). Recent progress in experimental and molecular dynamics study of carbon nanotube reinforced rubber composites: a review. In Polymer-Plastics Technology and Materials. 
     URL: https://doi.org/10.1080/25740881.2022.2084411


824. Deokar, S., Kumar, N., Singh, R. P., & Sahu, S. (2022). Toolpath optimisation for drilling process using shortest distance permutation algorithms. In Advances in Materials and Processing Technologies. 
     URL: https://doi.org/10.1080/2374068X.2022.2091190


825. Singh, S., Nandan, A. S., Sikka, G., Malik, A., & Singh, P. K. (2022). Genetic algorithm-based data controlling method using IoT-enabled WSN in power grid. In Soft Computing. 
     URL: https://doi.org/10.1007/s00500-022-07186-6


826. Kumar, A., & Mariappan, G. (2022). Effect of Laundry Parameters on Micro Fiber Loss during Washing and Its Correlation with Carbon Footprint. In Journal of Natural Fibers. 
     URL: https://doi.org/10.1080/15440478.2022.2068729


827. Singh, S., & Kukreja, R. (2022). Experimental study on spray cooling heat transfer enhancement using MWCNT and TiO2 hybrid nanofluid. In Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 
     URL: https://doi.org/10.1177/09544089221094991


828. Singh, N., Haque, M. M., & Gupta, A. (2022). Reviewing mechanical performance of geopolymer concrete containing coal bottom ash. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.04.408


829. Singh, N., Gupta, A., & Haque, M. M. (2022). A review on the influence of copper slag as a natural fine aggregate replacement on the mechanical properties of concrete. In Materials Today: Proceedings (Vol. 62, pp. 3624–3637). 
     URL: https://doi.org/10.1016/j.matpr.2022.04.414


830. Phanden, R. K., Aditya, S. V, Sheokand, A., Goyal, K. K., Gahlot, P., & Jacso, A. (2022). A state-of-the-art review on implementation of digital twin in additive manufacturing to monitor and control parts quality. In Materials Today: Proceedings (pp. 88–93). 
     URL: https://doi.org/10.1016/j.matpr.2021.12.217


831. Singh, N., Singh, T., Kumar, M., Singh, A., & Kumar, P. (2022). Investigating the fresh state performance of concrete containing iron slag and recycled concrete aggregates. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.04.462


832. Attri, P., Garg, S., Ratan, J. K., & Giri, A. S. (2022). Comparative study using advanced oxidation processes for the degradation of model dyes mixture: Reaction kinetics and biodegradability assay. In Materials Today: Proceedings (pp. 1533–1538). 
     URL: https://doi.org/10.1016/j.matpr.2021.12.063


833. Basrani, J., Kumar, M., & Kumar, P. (2022). A study of parameters affecting mechanical characteristics of hybrid composite. In Materials Today: Proceedings (Vol. 56, pp. 3086–3093). 
     URL: https://doi.org/10.1016/j.matpr.2021.12.162


834. Kumar, R., Gautam, N., Yadav, S., Venketesh, T., & Awol, N. (2022). Structural and Physicomechanical Properties of an Active Film Based on Potato Starch, Silver Nanoparticles, and Rose Apple (Syzygium samarangense) Extract. In International Journal of Polymer Science (Vol. 2022). 
     URL: https://doi.org/10.1155/2022/7816333


835. Singh, S., Singh, S., Mohammed, M. K. A., & Wadhwa, G. (2022). Dual Cavity Dielectric Modulated Ferroelectric Charge Plasma Tunnel FET As Biosensor: For Enhanced Sensitivity. In IEEE Transactions on Nanobioscience (p. 1). 
     URL: https://doi.org/10.1109/TNB.2022.3174266


836. Kumar Sarangi, P., Subudhi, S., Bhatia, L., Saha, K., Mudgil, D., Prasad Shadangi, K., Srivastava, R. K., Pattnaik, B., & Arya, R. K. (2022). Utilization of agricultural waste biomass and recycling toward circular bioeconomy. In Environmental Science and Pollution Research. 
     URL: https://doi.org/10.1007/s11356-022-20669-1


837. Ansari, F., Chaudhary, T., Sunkaria, R. K., Singh, M., & Raj, B. (2022). Comparative Analysis of Nanowire Tunnel Field Effect Transistor for Low Power Application. In Silicon. 
     URL: https://doi.org/10.1007/s12633-022-01967-2


838. Saurabh, K., & Singh, S. (2022). A 3.5GHz Power Amplifier Design (Vols. 2022-April). 
     URL: https://doi.org/10.1109/ICETET-SIP-2254415.2022.9791733


839. Rattanpal, P., & Singh, S. (2022). Design of a Multistage X Band Power Amplifier (Vols. 2022-April). 
     URL: https://doi.org/10.1109/ICETET-SIP-2254415.2022.9791713


840. Kumar, R., & Singh, S. (2022). A Three Stage Ku-Band GaN HEMT Power Amplifier (Vols. 2022-April). 
     URL: https://doi.org/10.1109/ICETET-SIP-2254415.2022.9791701


841. Kaur, H., & Sikka, G. (2022). Enriching module dependency graphs for improved software clustering. In International Journal of System of Systems Engineering (Vol. 12, Issue 1, pp. 30–50). 
     URL: https://doi.org/10.1504/IJSSE.2022.123323


842. Kumar, S., & Sikander, A. (2022). An intelligent optimize path planner for efficient mobile robot path planning in a complex terrain. In Microsystem Technologies. 
     URL: https://doi.org/10.1007/s00542-022-05322-8


843. Singla, A. K., Kanse, S., Kansal, S., Rani, S., & Mehra, R. (2022). A comprehensive study of radon in drinking waters of Hanumangarh district and the assessment of resulting dose to local population. In Environmental Geochemistry and Health. 
     URL: https://doi.org/10.1007/s10653-022-01304-x


844. Singh, L., Ravaliya, N. R., & Abdul Akbar, M. (2022). Effectiveness of RCC Crown Hinge Reinforcement Detailing for a Three-Hinged Arch. In Structural Integrity (Vol. 19, pp. 376–387). 
     URL: https://doi.org/10.1007/978-3-030-98335-2_25


845. Singh, A. B., & Rani, R. (2022). Iris Biometric Presentation Attack: Types and Detection Techniques—A Review (Vol. 425, pp. 415–426). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_38


846. Gupta, K., Goyal, K. K., Phanden, R., & Rani, D. (2022). A Study on Wire Electric Discharge Machining Process Parameters Prediction Model Using Deep Learning Neural Network (Vol. 425, pp. 491–501). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_45


847. Gupta, K., Goyal, K. K., Trehan, A., & Sharma, N. (2022). WEDM Process Parameters Optimization Using MOPSO (Vol. 425, pp. 503–514). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_46


848. Goel, A., Verma, O. P., & Manik, G. (2022). Analytical Modeling of Parabolic Trough Solar Collector (Vol. 425, pp. 367–378). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_34


849. Kumar, A., Sharma, T. K., Verma, O. P., Poonia, A. S., & Bisht, M. (2022). COVID-19 Cases in India: Prediction and Analysis using Machine Learning (Vol. 425, pp. 551–563). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_50


850. Sreelakshmy, K., Gupta, H., Ansari, I. A., Sharma, S., Goyal, K. K., & Verma, O. P. (2022). Metaheuristic Optimization for Three Dimensional Path Planning of UAV (Vol. 425, pp. 791–802). 
     URL: https://doi.org/10.1007/978-981-19-0707-4_71


851. Yadav, A. K., Bagha, A. K., Bahl, S., & Sharma, R. C. (2022). Experimental Modal Analysis for Measuring the Structural Damping Capacity of Microwave Cast SS202 Material (pp. 733–740). 
     URL: https://doi.org/10.1007/978-981-19-0244-4_69


852. Gupta, N., Bagha, A. K., Bahl, S., & Sharma, R. C. (2022). Optimal Location of Piezoelectric Sensors on a Beam by Using Its Response Model (pp. 859–865). 
     URL: https://doi.org/10.1007/978-981-19-0244-4_79


853. Verma, R., Randhawa, J. S., Pitcha, D., & Ali, J. (2022). Design optimisation of interference limits for cup-plug installation in HHP cylinder head. In International Journal of Heavy Vehicle Systems (Vol. 29, Issue 1, pp. 71–94). 
     URL: https://doi.org/10.1504/IJHVS.2022.123243


854. Rana, S., Abdul Akbar, M., Sharma, R., & Thakur, A. (2022). Analysis of Accidental Collision of Blue Whale with Submerged Floating Tunnel. In Structural Integrity (Vol. 27, pp. 79–87). 
     URL: https://doi.org/10.1007/978-3-031-04793-0_6


855. Priyadarsh, P. G., & Rani, N. (2022). Response of T-shaped Tall Building Under Wind Load. In Structural Integrity (Vol. 27, pp. 336–343). 
     URL: https://doi.org/10.1007/978-3-031-04793-0_25


856. Jain, V. K., & Chatterjee, A. (2022). Graphene Functionalized Cotton Nonwoven for Thermotherapy. In Journal of Natural Fibers. 
     URL: https://doi.org/10.1080/15440478.2022.2079579


857. Kumar, S., Kapoor, K., Singh, R. B., & Singh, P. (2022). Application of silica fume in high-volume fly ash self-compacting recycled aggregate concrete. In Australian Journal of Civil Engineering. 
     URL: https://doi.org/10.1080/14488353.2022.2083426


858. Singh, S., Sharma, S. K., & Akbar, M. A. (2022). Heat resistance and sorptivity of an air-entrained concrete containing mineral admixtures and CBA. In Journal of Engineering, Design and Technology. 
     URL: https://doi.org/10.1108/JEDT-01-2022-0068


859. Kumar Phanden, R., Sheokand, A., Kumar Goyal, K., Gahlot, P., & Ibrahim Demir, H. (2022). 8Ds method of problem solving within automotive industry: Tools used and comparison with DMAIC. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.05.383


860. Singh, R., Singh, R. P., & Trehan, R. (2022). Machine learning algorithms based advanced optimization of EDM parameters: An experimental investigation into shape memory alloys. In Sensors International (Vol. 3). 
     URL: https://doi.org/10.1016/j.sintl.2022.100179


861. Rawat, S., Samyal, R., Bedi, R., & Kumar Bagha, A. (2022). A comparative study of interface material through selective microwave hybrid heating for joining metal plates. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.05.346


862. Mann, G. S., Singh, L. P., Kumar, P., Khan, A., Khan, A. A. P., & Asiri, A. M. (2022). Effect of Process Parameters on the Fabrication of Hybrid Natural Fiber Composites Fabricated via Compression Moulding Process. In Journal of Natural Fibers. 
     URL: https://doi.org/10.1080/15440478.2022.2069185


863. Garg, S., Sikka, M. P., & Midha, V. K. (2022). Review on fabric thermal comfort in wet conditions. In Research Journal of Textile and Apparel. 
     URL: https://doi.org/10.1108/RJTA-03-2022-0034


864. Mustafeezul Haque, M., & Marghoobul Haque, M. (2022). Finite element analysis of bubble deck slab with various thickness of HDPE bubble. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.05.318


865. Ali, S., & Kumar, M. (2022). Service Placement in Edge Computing with AI Based Techniques: Vol. 303 SIST (pp. 684–693). 
     URL: https://doi.org/10.1007/978-981-19-2719-5_64


866. Navagire, O. P., Sharma, S. K., & Rambabu, D. (2022). Stabilization of Expansive Soil with Thermal Power Plant Waste (Fly Ash and Coal Bottom Ash)—A Review (pp. 323–332). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_21


867. Ojha, S., Pranay, V., Raghavendra, G., Sumithra, G., Divya, P., Anji Reddy, B., Aswani Kumar, B., & Vardhan, H. (2022). Evaluation of Abrasive Wear of Bio-waste Based Silica/Carbon Particulate Epoxy Composites (pp. 471–479). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_32


868. Srivastava, A., & Sharma, S. (2022). Recent advances in experimental and molecular dynamics study of graphene-oxide/natural rubber composites: A review. In Journal of Reinforced Plastics and Composites. 
     URL: https://doi.org/10.1177/07316844221102939


869. Gupta, A. K., & Yadav, S. (2022). Feasibility Evaluation of Reactive Distillation Process for the Purification of Bioethanol (pp. 107–120). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_7


870. Kanakam, R., Subhash Chandra Bose, P., Raghavendra, G., Ojha, S., Dheeraj, G., Anjireddy, B., Aswani kumar, B., & vardhan, H. (2022). Overview of Gel Casted Fused Silica Ceramics (pp. 939–948). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_62


871. Saini, A., & Ratan, J. K. (2022). A Review on Titanium Dioxide Based Photocatalytic Cement: Self-cleaning Cement (pp. 239–273). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_18


872. Agrawal, S., Sahu, D., Dhurandher, B. K., Bahman, A., Ratan, J. K., Kanchan, Pandhare, N. N., & Verma, O. P. (2022). Incident Heat Flux Measurements with Efficient Plate Thermometer in the Fire Test Environment (pp. 143–156). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_10


873. Shrimal, P. K., Garg, S., & Giri, A. S. (2022). Synthesis of Biodegradable Composite Films from Polyvinyl Alcohol (PVA)/Amla Leaf Fibre (ALF) for Packaging Application (pp. 603–617). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_41


874. Kumar, R., Bhardwaj, A., & Singh, L. P. (2022). Environmental Impact Assessment of Potato Cultivation in Northern India (pp. 1061–1070). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_70


875. Paliwal, A., Desai, A. A., Sahu, D., & Dhurandher, B. K. (2022). Analysis of Fire and Explosion Hazard of LPG Tanker Truck Accident: A Case Study (pp. 563–575). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_38


876. Bhavanam, A., Kumar, A., Neeraj, & Nikhil, G. N. (2022). Biological and Thermochemical Strategies for Building Biorefinery Platform (pp. 33–56). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_3


877. Kothiyal, N. C., Abhay, Khan, L., Kumar, V., Saruchi, & Singh, S. (2022). Recent advances in emission, analysis and remediation technique of carcinogenic polycyclic aromatic hydrocarbons: a review. In Global Nest Journal (Vol. 24, Issue 2, pp. 177–194). 
     URL: https://doi.org/10.30955/gnj.004197


878. Singh, J., Dash, S., Bhavanam, A., Gera, P., Giribabu, D., & Pandhare, N. N. (2022). Lignin Based Hydrogel Production and Their Applications (pp. 1131–1152). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_75


879. Shilpa, Basak, N., & Meena, S. S. (2022). Microbial Degradation of Conventional Polyethylene Waste: Current Status and Future Prospective (pp. 15–32). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_2


880. Sharma, A., Shukla, S., & Kumar, S. (2022). Application of cyanobacteria in soil health and rhizospheric engineering. In Rhizosphere Engineering (pp. 113–127). 
     URL: https://doi.org/10.1016/B978-0-323-89973-4.00024-7


881. Vishnoi, V., Tiwari, S., & Singla, R. (2022). Performance Investigation of EMFO-Based Perpetual Online Tuned Variable SR-Controller in Simulated Real Environment. In Cybernetics and Systems. 
     URL: https://doi.org/10.1080/01969722.2022.2073703


882. Singh, S., Garg, S., & Saran, A. D. (2022). Synthesis, Properties and Photo Catalytic Application of Cadmium Based Quantum Dots: A Review (pp. 333–347). 
     URL: https://doi.org/10.1007/978-3-030-96554-9_22


883. Rani, M., Keshu, & Shanker, U. (2022). Efficient visible light photocatalytic organic colorants elimination performance induced by biosynthesized titanium dioxide coupled cadmium sulfide nanostructures. In International Journal of Environmental Science and Technology. 
     URL: https://doi.org/10.1007/s13762-022-04255-z


884. Sharma, R., & Kumar, H. (2022). Volumetric and acoustic studies of interactions between L-phenylalanine and 1-hexyl-3-methylimidazolium bromide in aqueous solution (Vol. 107, Issue 1, pp. 5227–5233). 
     URL: https://doi.org/10.1149/10701.5227ecst


885. Gupta, M., Digalwar, A., Gupta, A., & Goyal, A. (2022). Integrating Theory of Constraints, Lean and Six Sigma: a framework development and its application. In Production Planning and Control. 
     URL: https://doi.org/10.1080/09537287.2022.2071351


886. Gahrotra, R., Sharma, V., Dogra, A. R., Malik, P., & Kumar, P. (2022). Temperature dependent morphological and electro-optical characteristics of dye doped cholesteric liquid crystal (Vol. 107, Issue 1, pp. 5481–5486). 
     URL: https://doi.org/10.1149/10701.5481ecst


887. Kaur, R., & Kumar, H. (2022). An Insight into the Effect of Drug Betaine Hydrochloride on the Micelle Forming Tendency of Surfactant AOT (Vol. 107, Issue 1, pp. 5235–5247). 
     URL: https://doi.org/10.1149/10701.5235ecst


888. Chinky, Kumar, P., & Malik, P. (2022). Studies of Electro-Optic and Thermal Behaviour of Azo Dye Doped Vertically Aligned Liquid Crystal (Vol. 107, Issue 1, pp. 163–169). 
     URL: https://doi.org/10.1149/10701.0163ecst


889. Kaur, J., Kumar, H., & Awasthi, P. (2022). An Investigation on Drug Binding Ability of Cationic Surfactant CTAB (Vol. 107, Issue 1, pp. 5293–5303). 
     URL: https://doi.org/10.1149/10701.5293ecst


890. Dhakar, N. K., & Pahuja, R. (2022). Analysis of Landsat 8 Imagery for Landform Classification and Change Detection (Vol. 107, Issue 1, pp. 249–257). 
     URL: https://doi.org/10.1149/10701.0249ecst


891. Yadav, S., Khushboo, Kaur, G., Singh, A. K., Chauhan, G., Kumar, P., & Malik, P. (2022). Thermal and Electro-Optical Properties of Size Dependent Nickel Nanoparticle Doped Blue Phase Liquid Crystals (Vol. 107, Issue 1, pp. 7925–7932). 
     URL: https://doi.org/10.1149/10701.7925ecst


892. Kaur, G., & Kumar, H. (2022). Unravelling The Interactions Prevailing in Mixed Micellar System of Surface-Active Ionic Liquid and Cationic Surfactant (Vol. 107, Issue 1, pp. 5249–5262). 
     URL: https://doi.org/10.1149/10701.5249ecst


893. Kumar, R., Bansal, H. O., Gautam, A. R., Mahela, O. P., & Khan, B. (2022). Experimental Investigations on Particle Swarm Optimization Based Control Algorithm for Shunt Active Power Filter to Enhance Electric Power Quality. In IEEE Access (Vol. 10, pp. 54878–54890). 
     URL: https://doi.org/10.1109/ACCESS.2022.3176732


894. Kundan, P., Sharma, S., & Kumar, M. (2022). MECHANICAL BEHAVIOR OF RUBBERIZED CONCRETE COMPOSITES: AN EXPERIMENTAL STUDY. In Composites: Mechanics, Computations, Applications (Vol. 13, Issue 1, pp. 63–80). 
     URL: https://doi.org/10.1615/COMPMECHCOMPUTAPPLINTJ.2022042560


895. Senthil, K., Chauhan, G. S., Rupali, S., & Pravesh, K. (2022). Prediction of Resistance of Layered Toughened Glass Under Low-Velocity Impact (pp. 287–298). 
     URL: https://doi.org/10.1007/978-981-16-6490-8_24


896. Mahajan, J., Kaur, J., Melnik, R., & Tiwari, A. K. (2022). Free convection heat transfer from a semi-circular cylinder inside a square enclosure: Orientation effects. In Materials Today: Proceedings (Vol. 57, pp. 1884–1891). 
     URL: https://doi.org/10.1016/j.matpr.2022.01.207


897. Prajapati, R., & Tiwari, S. (2022). ANFIS-Based STATCOM for Reactive Power Compensation of Dynamic Loads Under Microgrid Disturbances (Vol. 836, pp. 199–207). 
     URL: https://doi.org/10.1007/978-981-16-8542-2_16


898. Singh, D., Manojkumar, D., & Kumar, S. (2022). Strength characteristics of kaolin clay mixed with RHA, sand and lime. In Materials Today: Proceedings (Vol. 60, pp. 328–335). 
     URL: https://doi.org/10.1016/j.matpr.2022.01.236


899. Gupta, A., Iyer Ganesh, K., Melnik, R., & Kumar Tiwari, A. (2022). Mixed convection from semi-circular cylinder in Bingham plastic fluids: Adding buoyancy. In Materials Today: Proceedings (Vol. 57, pp. 1898–1905). 
     URL: https://doi.org/10.1016/j.matpr.2022.01.297


900. Singh, S., & Kukreja, R. (2022). Effect of binary mixed-surfactants and hybrid nanofluid on spray cooling heat transfer. In Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 
     URL: https://doi.org/10.1177/09544089221097691


901. Khullar, S., Janak, Sakshi, Saini, H., Sapner, V. S., Sathe, B. R., & Markad, D. (2022). Design and Synthesis of Lead(II)-Based Electrocatalysts for Oxygen Evolution Reaction. In Inorganic Chemistry. 
     URL: https://doi.org/10.1021/acs.inorgchem.2c00735


902. Gupta, R., Sharma, M., Jangir, V., Gautam, A. K., Chandra, A., & Arya, R. K. (2022). A theoretical and mathematical study on the importance of petroleum derivatives in the production of sanitizer based products. In Materials Today: Proceedings (Vol. 57, pp. 1755–1760). 
     URL: https://doi.org/10.1016/j.matpr.2021.12.423


903. Mehran, D., Danish, P., & Patel, M. (2022). Experimental study on eco-friendly concrete in construction industries. In Materials Today: Proceedings (Vol. 62, Issue P12, pp. 6734–6739). 
     URL: https://doi.org/10.1016/j.matpr.2022.04.815


904. Rajput, R. S., Singh, M., Kumar, P., & Srivastava, N. K. (2022). EVALUATION OF DAIRY EFFLUENT DETOXIFICATION AND REMOVAL EFFICIENCY IN AN INTEGRATED WASTEWATER TREATMENT SYSTEM USING LOW-COST ADSORBENTS. In Rasayan Journal of Chemistry (Vol. 15, Issue 1, pp. 593–599). 
     URL: https://doi.org/10.31788/RJC.2022.1516727


905. Sharma, S., & Awasthi, S. K. (2022). Introduction to intelligent transportation system: overview, classification based on physical architecture, and challenges. In International Journal of Sensor Networks (Vol. 38, Issue 4, pp. 215–240). 
     URL: https://doi.org/10.1504/IJSNET.2022.122593


906. Singh, P. K., Kumar, M., & Mishra, S. (2022). Finite element analysis of functionally graded bar under torsional load. In Materials Today: Proceedings (Vol. 56, pp. 2960–2966). 
     URL: https://doi.org/10.1016/j.matpr.2021.11.012


907. Pawar, K. S., Bagha, A. K., Bahl, S., & Nandan, D. (2022). Significant Applications of Composite and Natural Materials for Vibration and Noise Control: A Review (pp. 211–220). 
     URL: https://doi.org/10.1007/978-981-16-8341-1_17


908. Sharma, R., Jindal, R., Kaith, B. S., Kumar, V., Saruchi, Mishra, A. K., & Mishra, S. (2022). Biodegradation and water absorption studies of natural gum rosin-based hydrogel. In Bio-Based Nanomaterials: Synthesis Protocols, Mechanisms and Applications (pp. 93–108). 
     URL: https://doi.org/10.1016/B978-0-323-85148-0.00007-5


909. Gupta, V. K., Kumar, S., & Kukreja, R. (2022). Comparative thermal performance enhancement study of a reverse - irradiated and direct - irradiated direct absorption solar collector using silver nanofluid. In Energy Sources, Part A: Recovery, Utilization and Environmental Effects (Vol. 44, Issue 2, pp. 3823–3835). 
     URL: https://doi.org/10.1080/15567036.2022.2066739


910. Kaur, R., Gera, P., Jha, M. K., & Bhaskar, T. (2022). Hydrothermal Treatment of Pretreated Castor Residue for the Production of Bio-oil. In Bioenergy Research. 
     URL: https://doi.org/10.1007/s12155-022-10466-6


911. Thakur, A., Sharma, V., & Bhadauria, S. S. (2022). Investigation of metallurgical characterization and mechanical properties of double-sided friction stir welding of aluminum 6061 T6 alloy. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 
     URL: https://doi.org/10.1177/09544054221092935


912. Singh, J., Goyal, K. K., & Kumar, R. (2022). Effect of filling percentage and raster style on tensile behavior of FDM produced PLA parts at different build orientation. In Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.444


913. Chauhan, D., & Yadav, A. (2022). Binary Artificial Electric Field Algorithm. In Evolutionary Intelligence. 
     URL: https://doi.org/10.1007/s12065-022-00726-x


914. Jindal, R., Kaur, K., Khushbu, & Vaid, V. (2022). Biorenewable Nanocomposite: Recent Advances and Its Prospects in Wastewater Remediation. In ACS Symposium Series (Vol. 1411, pp. 313–340). 
     URL: https://doi.org/10.1021/bk-2022-1411.ch012


915. Rani, M., Yadav, J., & Shanker, U. (2022). Green Synthesized Zinc-Based Nanocomposites for Environmental Remediation. In ACS Symposium Series (Vol. 1411, pp. 141–163). 
     URL: https://doi.org/10.1021/bk-2022-1411.ch006


916. Sikka, M. P., Sarkar, A., & Garg, S. (2022). Artificial intelligence (AI) in textile industry operational modernization. In Research Journal of Textile and Apparel. 
     URL: https://doi.org/10.1108/RJTA-04-2021-0046


917. Sarla, & Singh, D. (2022). Performance Analysis of Wavelet Filters for Heart Rate Variability Analysis (pp. 107–116). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_11


918. Singh, P., Singla, R., & Kesari, A. (2022). An EEG Based Approach for the Detection of Mental Stress Level: An Application of BCI (pp. 49–57). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_5


919. Jatia, N., & Veer, K. (2022). Techniques Used in Phonocardiography: A Review (pp. 79–90). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_8


920. Maan, V., & Malik, A. (2022). Genetic Algorithm Application on 3D Pipe Routing: A Review (Vol. 855, pp. 139–148). 
     URL: https://doi.org/10.1007/978-981-16-8892-8_11


921. Kumar, S., Yadav, D., Gupta, H., & Verma, O. P. (2022). Smart Classroom Surveillance System Using YOLOv3 Algorithm (pp. 59–69). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_6


922. Gupta, J., Bhardwaj, B., & Sharma, V. (2022). Friction Welding Process of AA7075 Aluminium Alloy to Mild Steel (pp. 209–219). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_19


923. Thakur, N., Singh, A., & Sangal, A. L. (2022). Comparison of Multi-Criteria Decision-Making Techniques for Cloud Services Selection (Vol. 855, pp. 669–682). 
     URL: https://doi.org/10.1007/978-981-16-8892-8_51


924. Kumar, G., Sharma, V., Kumar, R., Thakur, A., Minhas, N., & Verma, O. P. (2022). Effect of Tool Tilt Angle on the Mechanical and Metallurgical Properties of Aluminium Alloy 6061-T6 Welded by Friction Stir Welding Process (pp. 221–229). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_20


925. Singh, T. K., Kakkar, D., & Singh, S. (2022). Design of Class AB and Class C Amplifiers (Vol. 838, pp. 41–49). 
     URL: https://doi.org/10.1007/978-981-16-8550-7_5


926. Singh, S., Malik, A., & Singh, P. K. (2022). ECICM: An Efficient Clustering and Information Collection Method in Heterogeneous Wireless Sensor Networks (Vol. 855, pp. 249–262). 
     URL: https://doi.org/10.1007/978-981-16-8892-8_19


927. Singh, S., Malik, A., Mehra, P. S., & Singh, P. K. (2022). DEERS: Design Energy-Efficient Routing Scheme for Harsh Environment Monitoring in Heterogeneous WSNs (Vol. 855, pp. 53–65). 
     URL: https://doi.org/10.1007/978-981-16-8892-8_5


928. Kesari, A., Singla, R., & Singh, P. (2022). EEG Based Study of Pictorial Advertisement Impact on Customers’ Market Preferences (pp. 71–78). 
     URL: https://doi.org/10.1007/978-981-16-9236-9_7


929. Sharma, R., & Senthil, K. (2022). Reviewing on influence of waste materials on structural concrete under impact loading. International Journal of Structural Engineering, 12(2), 103–124. 
     URL: https://doi.org/10.1504/IJSTRUCTE.2022.121985


930. Senthil, K., Sharma, R., Thakur, A., Iqbal, M. A., & Singh, A. P. (2022). Investigation on Impact Characteristics of Concrete Under Varying Drop Height of Pendulum Impact. Lecture Notes in Mechanical Engineering, 353–365. 
     URL: https://doi.org/10.1007/978-981-16-9539-1_25


931. Thakur, A., & Bedi, R. (2022). Influence of process parameters on microwave joining of the similar/dissimilar materials: A review. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.428


932. Ansari, M. S. A., Pal, K., Govil, M. C., Govil, P., & Srivastava, A. (2022). P2P Traffic Identification Using Machine Learning and Feature Selection Techniques. Lecture Notes in Electrical Engineering, 869, 393–407. 
     URL: https://doi.org/10.1007/978-981-19-0019-8_30


933. Awasthi, A., Kallioğlu, M. A., Sharma, A., Mohan, A., Chauhan, R., & Singh, T. (2022). Solar collector tilt angle optimization for solar power plant setup-able sites at Western Himalaya and correlation formulation. Journal of Thermal Analysis and Calorimetry. 
     URL: https://doi.org/10.1007/s10973-022-11345-0


934. Singh, P. K., & Kumar, M. (2022). Hypervelocity impact behavior of projectile penetration on spacecraft structure: A review. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.437


935. Thakur, M., & Bawa, S. (2022). Self-Compacting geopolymer Concrete: A review. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.400


936. Kumar, S., Kumar, R., Goyal, K. K., & Sharma, N. (2022). Development of aluminium based hybrid MMC and investigation of tribological properties. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.336


937. Kumar Sharma, V., Kumar, R., & Pal Singh, A. (2022). Laboratory investigation of bituminous concrete using Reclaimed asphalt pavement and waste Engine oil. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.139


938. Kumar, S., Kumar, R., Goyal, K. K., & Sharma, N. (2022). Experimental study on tensile strength of Al2024/SiC/FA/Graphite hybrid MMC prepared by stir casting. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.306


939. Singh Deora, P., Khurana, M., Priya, Avtar Muhal, R., Upadhyay, D., & Goswami, C. (2022). A review on fibrous materials for body armor application. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.03.209


940. Kakkar, D., Singh, R., Sebastian, J., & Kushagre. (2022). Wireless Propagation Models Optimization using Artificial Neural Network Algorithm. 2022 International Conference for Advancement in Technology, ICONAT 2022. 
     URL: https://doi.org/10.1109/ICONAT53423.2022.9725844


941. Kumar, N., Verma, P. K., & Kumar, V. (2022). ADV-LEACH2 Energy-Efficient Clustering Protocols for Three-Tier Heterogeneous Wireless Sensor Networks. IEIE Transactions on Smart Processing and Computing, 11(1), 49–56. 
     URL: https://doi.org/10.5573/IEIESPC.2021.11.1.49


942. Das, S. R., & Basak, N. (2022). Optimization of process parameters for enhanced biohydrogen production using potato waste as substrate by combined dark and photo fermentation. Biomass Conversion and Biorefinery. 
     URL: https://doi.org/10.1007/s13399-022-02588-w


943. Rout, P. R., Goel, M., Mohanty, A., Pandey, D. S., Halder, N., Mukherjee, S., Bhatia, S. K., Sahoo, N. K., & Varjani, S. (2022). Recent Advancements in Microalgal Mediated Valorisation of Wastewater from Hydrothermal Liquefaction of Biomass. Bioenergy Research. 
     URL: https://doi.org/10.1007/s12155-022-10421-5


944. Navagire, O. P., Sharma, S. K., & Rambabu, D. (2022). Stabilization of black cotton soil with coal bottom ash. Materials Today: Proceedings, 52, 979–985. 
     URL: https://doi.org/10.1016/j.matpr.2021.10.447


945. Komal, K., Bawa, S., & Kantsharma, S. (2022). Laboratory investigation on the effect of polypropylene and nylon fiber on silt stabilized clay. Materials Today: Proceedings, 52, 1368–1376. 
     URL: https://doi.org/10.1016/j.matpr.2021.11.123


946. Singh, G. D., Sharma, V. K., Sangma, B., Kumar, R., Senthil, K., & Singh, A. P. (2022). Experimental study on bituminous concrete pavement using low density polyethylene and sasobit. Materials Today: Proceedings, 52, 2109–2114. 
     URL: https://doi.org/10.1016/j.matpr.2021.12.387


947. Khushbu, & Jindal, R. (2022). Thermal stability and optimization of graphene oxide incorporated chitosan and sodium alginate based nanocomposite containing inclusion complexes of paracetamol and β-cyclodextrin for prolonged drug delivery systems. Polymer Bulletin. 
     URL: https://doi.org/10.1007/s00289-022-04157-7


948. Kaith, B. S., Singh, A., & Sud, D. (2022). A new horizon for structural modifications and comprehensive applications of Colocasia esculenta (L.) Schott. Materials Today: Proceedings, 53, 269–272. 
     URL: https://doi.org/10.1016/j.matpr.2022.01.090


949. Balram, & Singh Kaith, B. (2022). Removal of hazardous metal ions from polluted water using biomaterial-based ion- exchangers: A review. Materials Today: Proceedings, 53, 174–178. 
     URL: https://doi.org/10.1016/j.matpr.2021.12.495


950. Singh Kaith, B., Rohit, & Kumar, R. (2022). Psyllium Polysaccharide-Based hydrogels as smart Biomaterials: Review. Materials Today: Proceedings, 53, 244–246. 
     URL: https://doi.org/10.1016/j.matpr.2022.01.051


951. Gupta, K., & Raman, A. (2022). Design of Low-Power Bit Swapping BIST for IC Self-testing. Lecture Notes in Networks and Systems, 355, 569–577. 
     URL: https://doi.org/10.1007/978-981-16-8512-5_60


952. Jena, S. D., Kaur, J., & Rani, R. (2022). A Review of Prediction of Software Defect by Using Machine Learning Algorithms. Lecture Notes in Electrical Engineering, 832, 61–70. 
     URL: https://doi.org/10.1007/978-981-16-8248-3_5


953. Raghavendra, K., & Kakkar, D. (2022). Impact of Fractal Geometry on Microstrip Patch Antenna at Futuristic Frequencies. Lecture Notes in Electrical Engineering, 832, 143–153. 
     URL: https://doi.org/10.1007/978-981-16-8248-3_12


954. Chand, R., Sharma, V. S., & Trehan, R. (2022). Investigation of Static and Dynamic Loading Conditions on the Multi Jet 3D Printer Parts. Lecture Notes in Electrical Engineering, 880 LNEE, 540–546. 
     URL: https://doi.org/10.1007/978-981-19-0572-8_69


955. Javaid, M., Haleem, A., Singh, R. P., Rab, S., & Suman, R. (2022). Exploring impact and features of machine vision for progressive industry 4.0 culture. Sensors International, 3. 
     URL: https://doi.org/10.1016/j.sintl.2021.100132


956. Akula, V. S. R. P., Goyal, K. K., Verma, O. P., & Sharma, N. (2022). Low-cost azimuth and elevation antenna rotator for LEO satellite tracking. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.02.292


957. Sharma, N., Sharma, A., Goyal, K. K., Gupta, S., Bahl, S., & Sharma, G. K. (2022). Transformation temperature and corrosion behavior of porous NiTi and NiTiCu shape memory alloy. Materials Today: Proceedings. 
     URL: https://doi.org/10.1016/j.matpr.2022.02.519


958. Sharma, V., Kumar, A., & Kaur, A. (2022). Sustainable deployment of crushed concrete aggregates strengthened with cement and sand. Archives of Materials Science and Engineering, 113(1), 19–34. 
     URL: https://doi.org/10.5604/01.3001.0015.6970


959. Sikka, M., Agrawal, C., Mishra, A., & Ashwin, S. (2022). Impact of Covid-19 on textile sector. Asian Textile Journal, 31(1–2), 44–52. 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85126470217&partnerID=40&md5=6a53f68945d9fd097ee8c6a413dc513c


960. Maurya, S., & Roy, M. D. (2022). Effect of chemical extraction on yield and some mechanical properties of banana fabric. Asian Textile Journal, 31(1–2), 29–32. 
     URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85126453316&partnerID=40&md5=f05e450e4cfee9f3530bd5b77ca57435


961. Sharma, P., & Sangal, A. L. (2022). Examining the Predictive Capability of Advanced Software Fault Prediction Models – An Experimental Investigation Using Combination Metrics. E-Informatica Software Engineering Journal, 16. 
     URL: https://doi.org/10.37190/E-INF220104


962. Singh, V., Kukreja, R., & Sehgal, S. S. (2022). Two-phase frictional pressure drop of R134a and R410A condensing inside multiport rectangular microchannels with different aspect ratio. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 44(1), 306–320. 
     URL: https://doi.org/10.1080/15567036.2022.2044940


963. Gupta, R., Tyagi, M., & Garg, R. K. (2022). Hurdle Appraisal for the Implementation of Circular Economy Notions in Supply Chain. Lecture Notes in Mechanical Engineering, 21–35. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_3


964. Kumar, V., & Singh, A. K. (2022). Design of Fuzzy Controller for Blood Glucose Level. Lecture Notes in Mechanical Engineering, 91–102. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_9


965. Yadav, M., Bhardwaj, A., & Goyal, K. K. (2022). Data Analytics for NIRF Ranking of Indian Institutions to Check the Consistency and Validity of Ranking Framework. Lecture Notes in Mechanical Engineering, 243–255. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_19


966. Singh, S., Tyagi, M., & Sachdeva, A. (2022). Improvement of Climate-Smart Agriculture System Based on Obstacles Assessment. Lecture Notes in Mechanical Engineering, 11–20. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_2


967. Gagandeep, Singh, N., Charak, A., Tyagi, M., & Walia, R. S. (2022). Effect of IoT in Supply Chain Management—A Review. Lecture Notes in Mechanical Engineering, 283–297. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_22


968. Singh, P., & Singh, A. (2022). Unmasking the Masked Face Using Zero-Shot Learning. Communications in Computer and Information Science, 1534 CCIS, 563–585. 
     URL: https://doi.org/10.1007/978-3-030-96040-7_43


969. Sharma, J., Tyagi, M., & Bhardwaj, A. (2022). Assessment of the Challenges Obstructing Performance of Indian Food Supply Chain Dynamics. Lecture Notes in Mechanical Engineering, 365–376. 
     URL: https://doi.org/10.1007/978-981-16-7059-6_27


970. Redie, D. K., Sirko, A. E., Demissie, T. M., Teferi, S. S., Shrivastava, V. K., Verma, O. P., & Sharma, T. K. (2022). Diagnosis of COVID-19 using chest X-ray images based on modified DarkCovidNet model. Evolutionary Intelligence. 
     URL: https://doi.org/10.1007/s12065-021-00679-7


971. Gopal, N., & Panchal, D. (2022). A structured framework for performance optimization using JBLTO, FCOPRAS and FCODAS methodologies. Journal of Quality in Maintenance Engineering. 
     URL: https://doi.org/10.1108/JQME-11-2021-0087


972. Gupta, H., & Verma, O. P. (2022). Vaccine hesitancy in the post-vaccination COVID-19 era: a machine learning and statistical analysis driven study. Evolutionary Intelligence. 
     URL: https://doi.org/10.1007/s12065-022-00704-3


973. Sandhu, P. K. S., & Kumar, A. (2022). Experimental and numerical analysis of the under-reamed piled ring foundation. Marine Georesources and Geotechnology. 
     URL: https://doi.org/10.1080/1064119X.2022.2039816


974. P, P., Malik, P., Supreet, Kumar, A., Castagna, R., & Singh, G. (2022). Recent advances and future perspectives on nanoparticles-controlled alignment of liquid crystals for displays and other photonic devices. Critical Reviews in Solid State and Materials Sciences. 
     URL: https://doi.org/10.1080/10408436.2022.2027226


975. Sharma, S. K., Kumar, K. V. P., Akbar, M. A., & Rambabu, D. (2022). Comparative study of finite element analysis and generalized beam theory in prediction of lateral torsional buckling. Advances in Materials Research (South Korea), 11(1), 59–73. 
     URL: https://doi.org/10.12989/amr.2022.11.1.059


976. Kumari, N., & Sathiya, S. (2022). An Intelligent Temperature Sensor with Non-linearity Compensation Using Convolutional Neural Network. Lecture Notes in Electrical Engineering, 815, 319–327. 
     URL: https://doi.org/10.1007/978-981-16-7011-4_32


977. Kumar, A., & Kumar, N. (2022). Advances in transparent polymer nanocomposites and their applications: A comprehensive review. Polymer-Plastics Technology and Materials, 61(9), 937–974. 
     URL: https://doi.org/10.1080/25740881.2022.2029892


978. Chakraborty, P., Shome, P. P., Panda, J. R., & Deb, A. (2022). Highly Selective UWB Bandpass Filter with Multi-Notch Characteristics Using Comb Shaped Resonator. Progress In Electromagnetics Research M, 108, 89–101. 
     URL: https://doi.org/10.2528/PIERM21112601


979. Singh, A., & Chakraborty, J. N. (2022). Multifunctional finishing of cotton using zinc oxide and silicon dioxide nanoparticles along with DMDHEU. Research Journal of Textile and Apparel. 
     URL: https://doi.org/10.1108/RJTA-11-2021-0130


980. Appala, V. N. S. G., Pandhare, N. N., & Bajpai, S. (2022). Biorefining of leather solid waste to harness energy and materials—A review. Biomass Conversion and Biorefinery. 
     URL: https://doi.org/10.1007/s13399-022-02455-8


981. Kaur, G., Singh, N., Rajor, A., & Arya, R. K. (2022). Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study. Environmental Science and Pollution Research. 
     URL: https://doi.org/10.1007/s11356-022-18961-1


982. Singh, S., Khosla, A., & Kapoor, R. (2022). Visual-Thermal Fusion-Based Object Tracking via a Granular Computing Backed Particle Filtering. IETE Journal of Research. 
     URL: https://doi.org/10.1080/03772063.2022.2030251


983. Singh, A., Samuel, S., Singh, H., Singh, J., Prakash, C., & Dhabi, Y. K. (2022). Whole Body Vibration Exposure among the Tractor Operator during Soil Tillage Operation: An Evaluation using ISO 2631-5 Standard. Shock and Vibration, 2022. 
     URL: https://doi.org/10.1155/2022/6412120


984. Behera, L. (2022). MCDPS: An Improved Global Scheduling Algorithm for Multiprocessor Mixed-Criticality Systems. Lecture Notes in Computer Science (Including Subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13145 LNCS, 157–162. 
     URL: https://doi.org/10.1007/978-3-030-94876-4_10


985. Das, S. S., Kumar, P., & Sandhu, S. S. (2022). Performance investigation of acetone and mobiltherm as a heat transfer medium in a hybrid photovoltaic-thermal system. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. 
     URL: https://doi.org/10.1080/15567036.2022.2032882


986. Singh, A. K., & Malik, P. (2022). Textural, electro-optical, dielectric and fluorescence studies of citrate buffer stabilized gold nanoparticles doped in polymer-dispersed liquid crystals composites. Liquid Crystals. 
     URL: https://doi.org/10.1080/02678292.2022.2027532


987. Hernández-Verón, M. Á., Magreñán, Á. A., Martínez, E., & Singh, S. (2022). An improvement of derivative-free point-to-point iterative processes with central divided differences. International Journal of Nonlinear Sciences and Numerical Simulation. 
     URL: https://doi.org/10.1515/ijnsns-2021-0245


988. Awasthi, S. K., & Singh, Y. N. (2022). AbsoluteTrust: Algorithm for Aggregation of Trust in Peer-to-Peer Networks. IEEE Transactions on Dependable and Secure Computing, 19(1), 176–189. 
     URL: https://doi.org/10.1109/TDSC.2020.2977641


989. Appala, V. N. S. G., Pandhare, N. N., & Bajpai, S. (2022). Mathematical Models for Optimization of Anaerobic Digestion and Biogas Production. Energy, Environment, and Sustainability, 575–591. 
     URL: https://doi.org/10.1007/978-981-16-8682-5_21


990. Dahiya, H. (2022). Flavor and spin structure of the proton. European Physical Journal: Special Topics, 231(2), 129–135. 
     URL: https://doi.org/10.1140/epjs/s11734-022-00438-4


991. Suresh Kumar, S., Midha, V. K., & Verma, S. (2022). Theoretical model to estimate the storage volume of rolled erosion control products/geomeshes. Journal of the Textile Institute. 
     URL: https://doi.org/10.1080/00405000.2022.2026578


992. Mukherjee, S., Kamila, B., Paul, S., Hazra, B., Chowdhury, S., Arya, R. K., Barman, S., & Halder, G. (2022). Insight into biosorptive uptake of fluoride by chemically activated biochar: experimental modeling and parametric optimization. Biomass Conversion and Biorefinery. 
     URL: https://doi.org/10.1007/s13399-021-02200-7


993. Kumar, J., Parmar, G., & Sikander, A. (2022). A Novel Model-Order Diminution Algorithm for LTIC System Using Whale Optimization. Lecture Notes in Electrical Engineering, 820, 299–306. 
     URL: https://doi.org/10.1007/978-981-16-7274-3_26


994. Aman, & Sangal, A. L. (2022). Drowsy Alarm System Based on Face Landmarks Detection Using MediaPipe FaceMesh. Lecture Notes in Networks and Systems, 329, 363–375. 
     URL: https://doi.org/10.1007/978-981-16-6246-1_31


995. Goyal, R., Parmar, G., & Sikander, A. (2022). Invasive Weed Optimization Based Reduced Order Modelling. Lecture Notes in Electrical Engineering, 820, 287–298. 
     URL: https://doi.org/10.1007/978-981-16-7274-3_25


996. Saini, R., Parmar, G., Gupta, R., & Sikander, A. (2022). An Enhanced Tuning of PID Controller via Hybrid Stochastic Fractal Search Algorithm for Control of DC Motor. Lecture Notes in Electrical Engineering, 820, 185–194. 
     URL: https://doi.org/10.1007/978-981-16-7274-3_16


997. Singh, A., Sunkaria, R. K., & Kaur, A. (2022). A Review on Local Binary Pattern Variants. Lecture Notes in Networks and Systems, 329, 545–552. 
     URL: https://doi.org/10.1007/978-981-16-6246-1_46


998. Ganesh, N. S., Maheswari, G. U., Srinivas, T., & Reddy, B. V. (2022). Exergoeconomic Analysis of a Novel Zeotropic Mixture Power System. International Journal of Precision Engineering and Manufacturing - Green Technology, 9(1). 
     URL: https://doi.org/10.1007/s40684-020-00273-9


999. Angurala, M., Singh, H., Anupriya, Grover, A., & Singh, M. (2022). Testing Solar-MAODV energy efficient model on various modulation techniques in wireless sensor and optical networks. Wireless Networks, 28(1), 413–425. 
     URL: https://doi.org/10.1007/s11276-021-02861-2


1000. Goyal, K. K., Sharma, N., Gupta, R. D., Singh, G., Rani, D., Banga, H. K., Kumar, R., Pimenov, D. Y., & Giasin, K. (2022). A Soft Computing-Based Analysis of Cutting Rate and Recast Layer Thickness for AZ31 Alloy on WEDM Using RSM-MOPSO. Materials, 15(2). 
      URL: https://doi.org/10.3390/ma15020635


1001. Attri, P., Garg, S., Ratan, J. K., & Giri, A. S. (2022). Silver nanoparticles from Tabernaemontana divaricate leaf extract: mechanism of action and bio-application for photo degradation of 4-aminopyridine. Environmental Science and Pollution Research. 
      URL: https://doi.org/10.1007/s11356-021-18269-6


1002. Srinivas, T. (2022). Exergy analysis of a HDH-VCR cycle for water and air Conditioning. International Journal of Exergy, 37(1), 40–56. 
      URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122832229&partnerID=40&md5=b1e7df0edd0bb25b35ad92ef9bebb0d7


1003. Ankur, N., & Singh, N. (2022). A Review on the Life Cycle Assessment Phases of Cement and Concrete Manufacturing. Sustainable Production, Life Cycle Engineering and Management, 85–96. 
      URL: https://doi.org/10.1007/978-3-030-90217-9_8


1004. Senthil, K., Thakur, A., & Singh, A. P. (2022). Multi-Hit Impact Resistance of Masonry Walls Under Large Mass. Lecture Notes in Mechanical Engineering, 177–188. 
      URL: https://doi.org/10.1007/978-981-16-6738-1_15


1005. Singh, S., Nr, R., Wadhwa, G., & Singh, S. (2022). Linearly Work-Function Modulated Gate Metal For Hetero Gate Dielectric TFET with S i 0.5 G e 0.5-Pocket at Source/Channel Junction. Silicon. 
      URL: https://doi.org/10.1007/s12633-021-01557-8


1006. Singh, D., Singh, S., Patel, S. K., Sinha, S., Arya, R. K., & Singh, D. (2022). Experimental investigation of different-shaped microwave-heated potatoes: thermal and quality characteristics analysis for food preservation. Environmental Science and Pollution Research. 
      URL: https://doi.org/10.1007/s11356-021-18473-4


1007. Sharma, S. K., Kapoor, K., Kumar, M., & Rambabu, D. (2022). Evaluating the effect of different mix compositions and site curing methods on the drying shrinkage and early strength of pavement quality self-compacting concrete. International Journal of Pavement Research and Technology, 15(1), 10–28. 
      URL: https://doi.org/10.1007/s42947-021-00004-6


1008. Meena, A., Singh, N., & Singh, S. P. (2022). Mechanical Properties of Polypropylene Fiber-Reinforced Geopolymer Composites: A Review. Lecture Notes in Civil Engineering, 172, 261–273. 
      URL: https://doi.org/10.1007/978-981-16-4396-5_24


1009. Singh, R., Patel, M., & Sohal, K. S. (2022). The Potential Use of Waste Paper Sludge for Sustainable Production of Concrete—A Review. Lecture Notes in Civil Engineering, 172, 365–374. 
      URL: https://doi.org/10.1007/978-981-16-4396-5_33


1010. Kumar, P., Singh, N., & Kumar, A. (2022). Split Tensile Behavior of HCFA Based SCC Including CBA and RCA. Lecture Notes in Civil Engineering, 172, 659–670. 
      URL: https://doi.org/10.1007/978-981-16-4396-5_58


1011. Kumar, M., Singh, S., & Kakkar, D. (2022). Design of Ku Band HEMT-Based Class AB Amplifier. Lecture Notes in Electrical Engineering, 777, 107–117. 
      URL: https://doi.org/10.1007/978-981-16-2761-3_10


1012. Anusha Raj, K., Sinha, P., Kumar, S., & Singh, D. (2022). Critical Overview of Reinforcing Sand Using Geocell for Shallow Foundation. Lecture Notes in Civil Engineering, 196, 271–280. 
      URL: https://doi.org/10.1007/978-981-16-6557-8_21


1013. Gupta, S., Khosla, A. K., Verma, P. K., & Verma, R. (2022). A Novel High-Throughput Medium Access Control Protocol for Concurrent Transmissions in Internet of Things. Lecture Notes in Electrical Engineering, 777, 191–199. 
      URL: https://doi.org/10.1007/978-981-16-2761-3_18


1014. Hernández-Verón, M. A., Yadav, S., Magreñán, Á. A., Martínez, E., & Singh, S. (2022). An algorithm derivative-free to improve the steffensen-type methods. Symmetry, 14(1). 
      URL: https://doi.org/10.3390/sym14010004


1015. Sharma, A., Shukla, D. K., Bagha, A. K., Bahl, S., & Nandan, D. (2022). Removing Error and Estimating an Accurate Finite Element Model of Graphite–Epoxy Composite Laminate Structure Using Direct Updating Method. Lecture Notes in Mechanical Engineering, 197–208. 
      URL: https://doi.org/10.1007/978-981-16-5371-1_18


1016. Gaikwad, A., & Singh, S. (2022). X Band Class F Power Amplifier for Satellite Communication. Lecture Notes in Electrical Engineering, 777, 119–124. 
      URL: https://doi.org/10.1007/978-981-16-2761-3_11


1017. Srivastava, M., Bawa, S., & Sharma, U. (2022). Effective Control of Response of a Reinforced Concrete Building Under Seismic Loads Using Tuned Liquid Damper. Lecture Notes in Mechanical Engineering, 449–463. 
      URL: https://doi.org/10.1007/978-981-16-5371-1_39


1018. Twinkle, & Saini, B. S. (2022). Performance Analysis of Fusion Methods for the Multimodal Fusion of CT/MRI, MRI/PET and PET/CT Brain Images. Lecture Notes in Electrical Engineering, 777, 833–855. 
      URL: https://doi.org/10.1007/978-981-16-2761-3_74


1019. Bedi, D., Sharma, S., & Tiwari, S. K. (2022). Effect of chirality and defects on tensile behavior of carbon nanotubes and graphene: Insights from molecular dynamics. Diamond and Related Materials, 121. 
      URL: https://doi.org/10.1016/j.diamond.2021.108769


1020. Kumar, S., Mathur, A., Rana, K. B., & Kumar, C. (2022). A building bio-climatic design tool incorporating passive strategies in residential dwellings design of composite climate of India. International Journal of Environment and Sustainable Development, 21(1–2), 175–205. 
      URL: https://doi.org/10.1504/IJESD.2022.119388


1021. Sarkar, G. S., Rathi, A., Basu, S., Arya, R. K., Halder, G. N., & Barman, S. (2022). Removal of Endocrine-Disrupting Compounds by Wastewater Treatment. Environmental Science and Engineering, 129–151. 
      URL: https://doi.org/10.1007/978-3-030-83811-9_7


1022. Singh, S., Utreja, D., & Kumar, V. (2022). Pyrrolo[2,1-f][1,2,4]triazine: a promising fused heterocycle to target kinases in cancer therapy. Medicinal Chemistry Research, 31(1). 
      URL: https://doi.org/10.1007/s00044-021-02819-1


1023. Vaid, V., & Jindal, R. (2022). RSM-CCD optimized in air synthesis of novel kappa-carrageenan/tamarind kernel powder hybrid polymer network incorporated with inclusion complex of (2-hydroxypropyl)-β-cyclodextrin and adenosine for controlled drug delivery. Journal of Drug Delivery Science and Technology, 67. 
      URL: https://doi.org/10.1016/j.jddst.2021.102976


1024. Singh, J., Sharma, A., & Chauhan, R. (2022). Investigation of Thermo-Hydraulic Performance for Different Arrangements of Ribs in Rectangular Solar Air Channel. Lecture Notes in Mechanical Engineering, 521–534. 
      URL: https://doi.org/10.1007/978-981-16-3497-0_42


1025. Khatkar, S. K., Verma, R., Kant, S., & Suri, N. M. (2022). Effect of reinforcements on the sliding wear behavior of self-lubricating AZ91D-SiC-Gr hybrid composites. International Journal of Surface Engineering and Interdisciplinary Materials Science, 10(1). 
      URL: https://doi.org/10.4018/IJSEIMS.2022010103


1026. Singh, S., Singh, S., Kumar, N., Singh, N. K., Ranjan, R., & Anand, S. (2022). Lead Zirconium Titanate (PZT)-Based Gate-All-Around Negative-Capacitance Junctionless Nanowire FET for Distortionless Low-Power Applications. Journal of Electronic Materials, 51(1), 196–206. 
      URL: https://doi.org/10.1007/s11664-021-09277-w


1027. Kumar, R., Sharma, S., Gupta, A., Singh, I., Chaudhary, P., Kumar, S., & Bharj, R. S. (2022). Effect of Dust Accumulation on the Power Production of the PV Module at Different Heights: A Case Study. Green Energy and Technology, 47–57. 
      URL: https://doi.org/10.1007/978-3-030-84635-0_2


1028. Natarajan, M., Sekhar, Y. R., Chiranjeevi, C., Srinivas, T., & Bicer, Y. (2022). Concentrated Solar Flux Assessment of Water Lens Collector. Lecture Notes in Mechanical Engineering, PartF1, 23–29. 
      URL: https://doi.org/10.1007/978-981-16-4489-4_3


1029. Verma, S., Sharma, N., Singh, A., Alharbi, A., Alosaimi, W., Alyami, H., Gupta, D., & Goyal, N. (2022). An intelligent forecasting model for disease prediction using stack ensembling approach. Computers, Materials and Continua, 70(3), 6041–6055. 
      URL: https://doi.org/10.32604/cmc.2022.021747


1030. Kumar, N., Kumar, V., & Verma, P. K. (2022). A Comparative Study of the Energy-Efficient Advanced LEACH (ADV-LEACH1) Clustering Protocols in Heterogeneous and Homogeneous Wireless Sensor Networks. Lecture Notes on Data Engineering and Communications Technologies, 73, 433–444. 
      URL: https://doi.org/10.1007/978-981-16-3961-6_36


1031. Salman, M., Chauhan, R., Poongavanam, G. K., Park, M. H., & Kim, S. C. (2022). Utilizing jet impingement on protrusion/dimple heated plate to improve the performance of double pass solar heat collector. Renewable Energy, 181, 653–665. 
      URL: https://doi.org/10.1016/j.renene.2021.09.082


1032. Palak, & Sangal, A. L. (2022). Deep Learning Approach to Classify Road Traffic Sign Images. Lecture Notes in Networks and Systems, 300 LNNS, 146–155. 
      URL: https://doi.org/10.1007/978-3-030-84760-9_14


1033. Prashar, N., & Sangal, A. L. (2022). Plant Disease Detection Using Deep Learning (Convolutional Neural Networks). Lecture Notes in Networks and Systems, 300 LNNS, 635–649. 
      URL: https://doi.org/10.1007/978-3-030-84760-9_54


1034. Pratap, A., & Rani, N. (2022). CFD Simulation for Wind Loads on Multi–span Flat Canopy Roofs. Lecture Notes in Civil Engineering, 171, 931–940. 
      URL: https://doi.org/10.1007/978-3-030-80312-4_79


1035. Sharma, S. K., Kumar, K. V. P., Akbar, M. A., & Rambabu, D. (2022). Application of Generalised Beam Theory in Predicting Lateral Torsional Buckling of Thin-Walled Steel Sections. Lecture Notes in Civil Engineering, 171, 37–47. 
      URL: https://doi.org/10.1007/978-3-030-80312-4_4


1036. Rani, N., Pratap, A., & Ahuja, A. K. (2022). Wind Pressure Distribution on Multi-span Semi-circular Canopy Roofs. Lecture Notes in Civil Engineering, 171, 831–840. 
      URL: https://doi.org/10.1007/978-3-030-80312-4_71


1037. Verma, K., Saini, H. K., & Sharma, A. K. (2022). Preventing DoS Attack in VANET by Novel RBS-IP-CHOCK Model. Lecture Notes in Electrical Engineering, 771, 281–293. 
      URL: https://doi.org/10.1007/978-981-16-2818-4_31


1038. Hemanth, S., Rani, N., & Akbar, M. A. (2022). Strengthening of Deep Beam Using External Bonding of Carbon Fiber Reinforced Polymer. Lecture Notes in Civil Engineering, 171, 559–568. 
      URL: https://doi.org/10.1007/978-3-030-80312-4_47


1039. Sharma, S. K., & Singh, S. (2022). Evaluation of Self Compacting Concrete as a Pavement Material for Construction and Retrofitting. Lecture Notes in Civil Engineering, 171, 1073–1080. 
      URL: https://doi.org/10.1007/978-3-030-80312-4_93


1040. Sharma, A., & Singh, D. (2022). Gender Based HRV Changes Occurring in ANS During Graded Head-Up Tilt and Head-Reverse Tilt. Lecture Notes in Electrical Engineering, 776, 101–114. 
      URL: https://doi.org/10.1007/978-981-16-2911-2_11


1041. Kumar, M., Kishor, A., Abawajy, J., Agarwal, P., Singh, A., & Zomaya, A. Y. (2022). ARPS: An Autonomic Resource Provisioning and Scheduling Framework for Cloud Platforms. In IEEE Transactions on Sustainable Computing (Vol. 7, Issue 2, pp. 386–399). 
      URL: https://doi.org/10.1109/TSUSC.2021.3110245


1042. Maini, A. K., Vaz, A., & Dauphin-Tanguy, G. (2022). Dynamics of a power hacksaw mechanism, contact interaction with the workpiece, and material removal. International Journal of Modelling and Simulation, 42(1), 117–142. 
      URL: https://doi.org/10.1080/02286203.2020.1846013


1043. Rout, R. K., Umer, S., Sheikh, S., Sindhwani, S., & Pati, S. (2022). EightyDVec: a method for protein sequence similarity analysis using physicochemical properties of amino acids. Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 10(1), 3–13. 
      URL: https://doi.org/10.1080/21681163.2021.1956369


1044. Chasta, S., Kumar, N., Francis, V., & Jain, P. K. (2022). STL Generation from Point Cloud Data with User-Controlled Triangulation for Additive Manufacturing. Lecture Notes in Mechanical Engineering, 239–250. 
      URL: https://doi.org/10.1007/978-981-16-3135-1_25


1045. Saini, V., Singh, S. P., Mishra, N., & Vaz, A. (2022). Trajectory Control and Force Control of Biomimetic Fingers by Tendon-Based Actuation System Using Bond Graph. Lecture Notes in Mechanical Engineering, 1177–1188. 
      URL: https://doi.org/10.1007/978-981-16-0550-5_112


1046. Uppal, S. K., & Vaz, A. (2022). Motion Control of a Phalange Using Tendon-Based Actuation System: A Bond Graph Approach. Lecture Notes in Mechanical Engineering, 1479–1486. 
      URL: https://doi.org/10.1007/978-981-16-0550-5_141


1047. Soni, V., & Vaz, A. (2022). A Bond Graph Model for the Estimation of Torque Requirements at the Knee Joint During Sit-to-Stand and Stand-to-Sit Motions. Lecture Notes in Mechanical Engineering, 1595–1603. 
      URL: https://doi.org/10.1007/978-981-16-0550-5_154


1048. Pathak, A. K., & Vaz, A. (2022). A Computation Model of Contact Interaction Between the Scaphoid and Its Neighboring Bones Using Bond Graph Approach. Lecture Notes in Mechanical Engineering, 1519–1527. 
      URL: https://doi.org/10.1007/978-981-16-0550-5_146


1049. Garg, R., Gupta, R., Singh, N., & Bansal, A. (2022). Eliminating pesticide quinalphos from surface waters using synthesized GO-ZnO nanoflowers: Characterization, degradation pathways and kinetic study. Chemosphere, 286. 
      URL: https://doi.org/10.1016/j.chemosphere.2021.131837


1050. Prakash, V., Kushwaha, P., Chand Sharma, K., & Bhakar, R. (2022). Frequency response support assessment from uncertain wind generation. International Journal of Electrical Power and Energy Systems, 134. 
      URL: https://doi.org/10.1016/j.ijepes.2021.107465


1051. Shaw, V. P., & Mukhopadhyay, A. (2022). Behaviour of Stretch Denim Fabric under Tensile Load. Fibers and Polymers, 23(1), 295–302. 
      URL: https://doi.org/10.1007/s12221-021-0456-5


1052. Singh, P. K., & Kumar, A. (2022). Experimental study on piled ring foundation resting on RDFS cushion overlying soft clay. In Marine Georesources and Geotechnology (Vol. 40, Issue 7, pp. 795–812). 
      URL: https://doi.org/10.1080/1064119X.2021.1940398


1053. Arya, R. K., Giribabu, D., Sharma, J., Rawat, M., Chandra, A., & Barman, S. (2022). Effect of surfactant on drying and rheology of poly (vinyl alcohol)–water coatings. In Drying Technology (Vol. 40, Issue 10, pp. 2140–2152). 
      URL: https://doi.org/10.1080/07373937.2021.1923025


1054. Rajpal, N., Ratan, J. K., Divya, N., & Hebbani, A. V. (2022). Bioremediation of greywater using a novel bacterial–fungal consortium: optimization and validation of the operating parameters in vitro. In Environmental Technology (United Kingdom) (Vol. 43, Issue 16, pp. 2430–2442). 
      URL: https://doi.org/10.1080/09593330.2021.1882582


1055. Chauhan, R., & Ghosh, S. (2022). Geometric model of lockstitch seam and prediction of thread consumption. Journal of the Textile Institute, 113(2), 314–323. 
      URL: https://doi.org/10.1080/00405000.2021.1872837


1056. Mukhopadhyay, A., & Devi, Y. (2022). Effect of water contamination on transmissivity behaviour of nonwoven geotextile. Journal of the Textile Institute, 113(1), 110–115. 
      URL: https://doi.org/10.1080/00405000.2020.1865504


1057. Kumar, H., & Katal, A. (2022). Analysis of the micellar properties of surfactants dodecyl trimethylammonium bromide and dodecyl trimethylammonium chloride in aqueous ionic liquids solution. Journal of Dispersion Science and Technology, 43(3), 419–438. 
      URL: https://doi.org/10.1080/01932691.2020.1842758


1058. Kumar, H., Kaur, G., & Sharma, S. (2022). Investigation of surface adsorption and thermodynamic properties of 1-tetradecyl-3-methylimidazolium bromide in the absence and presence of tetrabutylammonium bromide in aqueous medium. Journal of Dispersion Science and Technology, 43(5), 726–737. 
      URL: https://doi.org/10.1080/01932691.2020.1844743


1059. Saini, B. S., & Singh, S. P. (2022). Fatigue life prediction of self compacting concrete made with recycled concrete aggregates under flexural loading. Journal of Sustainable Cement-Based Materials, 11(1), 1–20. 
      URL: https://doi.org/10.1080/21650373.2020.1780511


1060. Kumar, M., Kumar, P., & Bhadauria, S. S. (2022). Numerical simulation of delamination growth in fiber reinforced polymer laminates using cohesive zone modeling. Mechanics of Advanced Materials and Structures, 29(2), 213–229. 
      URL: https://doi.org/10.1080/15376494.2020.1758257


1061. Kumar, S., Mathur, A., Kukreja, R., & Bagha, A. K. (2022). Quantification of thermal environments and comfort expectations of residents in hostel dormitories during hot and humid days in Indian composite climate. Advances in Building Energy Research, 16(1), 1–35. 
      URL: https://doi.org/10.1080/17512549.2020.1746928


1062. Verma, S., Midha, V. K., & Choudhary, A. K. (2022). Multi-objective Optimization of Process Parameters for Lignin Removal of Coir Using TOPSIS. Journal of Natural Fibers, 19(1), 256–268. 
      URL: https://doi.org/10.1080/15440478.2020.1739589


1063. Rani, N., Jajpura, L., & Butola, B. S. (2022). Sustainable Coloration of Protein Fibers Using Kalanchoe-Pinnata Leaf Extract. Journal of Natural Fibers, 19(1), 115–130. 
      URL: https://doi.org/10.1080/15440478.2020.1731904


1064. Mary, H. M. C., Singh, D., & Deepak, K. K. (2022). Assessment of Scale Invariance Changes in Heart Rate Signal During Postural Shift. In IETE Journal of Research (Vol. 68, Issue 1, pp. 308–314). 
      URL: https://doi.org/10.1080/03772063.2019.1604172